Every RVer Needs This!
Vložit
- čas přidán 21. 08. 2024
- There are a lot of essential RV accessories but one that I think is not your typical but definitely, a necessity is a properly sized jack to do maintenance and repairs on your RV. We found a great bottle jack that has worked very well for our size of a 5th wheel and the Safe Jack accessories made it easier, more functional and feels safer to use. The funny thing about an RV accessory like this is it may be overlooked or not thought of until you have to do a roadside repair. Here is the Jack we have.
10 Ton Jack. amzn.to/36Ss0lr
Safe Jack Kit 6 Ton. amzn.to/3IBKy6F
Safe Jack Individual Items.
Screw Caller. bit.ly/3JMvVP2
Expandable Ram. bit.ly/3iBt9jV
Here is our Amazon page for our favorite gear. We will be adding more products as we find more products we use and love. As an Amazon Associate, we earn from qualifying purchases.
www.amazon.com...
Passport America WE USE THIS ALL THE TIME. passportameric...?rfsn=2638351
Harvest Host Link www.harvest-ho...
Lithium Batteries bit.ly/2WZpYr9 Save 15% with code “allaboutrvs”
Need more info? Here is our Website: allaboutrvsinf...
jaredallaboutrvs@gmail.com
Membership link
/ @allaboutrvs
I love this channel because it’s just not another You Tuber saying “ look at me”. You provide sound practicable advice with comprehensive information. You’re friendly, sincere and extremely likable. I hope to meet you someday in person but just know I’ll have a million questions….haha. I’ve owned a travel trailer for 4 years and I ALWAYS come back to you to answer questions. Thanks for the great content. Cheers and God bless 🙏🏼⛺️😎
Thank you Roland that is very kind. Hope to see you on the road someday.
I’m going to guess you meant “...it’s NOT just a CZcamsr...” 🤣
Had to use truck factory jack to change a flat tire on trailer. Make sure to carry 4x4s and 2x4s and it raised the wheel easily to change out. Going to need blocks if you have any soft surface to use jack otherwise it will sink out of site.
You should put something on top of jack to spread out the jack force over a wider area of the frame. So you do not bend the frame of the RV.
That's a nice addition to a tool kit! I make a pad that consists of two pieces of pressure treated 4x6 7 inches long sitting side by side to make a 7 inch square block. I lag screw them together and I screw 1/2 inch pressure treated plywood to the top and bottom making them 4 1/2 thick. They work great under the levelers and under a Jack for maintenance or repair. They are a must for loose gravel or hot asphalt. I drill two holes in one block and thread some rope into them for handles.
My seemingly endless searches for information stop as soon as I stumble across a video from you. I don't know why I don't just start here. Thanks for the great content.
Welcome aboard! Thanks!
Jared, I continue to be impressed with the clear and helpful content you deliver to us. Now I know what jacks we should buy; thank you! You also helped us pick a replacement rooftop air conditioner on another video.
After going all summer with just an 8,000 BTU portable a/c in our fifthwheel in Florida, an electrician wired up our new Atwood Air Command 15,000 BTU with heat pump, air distribution panel, new thermostat and remote (model 15028).
Last night we slept comfortably cool for the first time in months.
While eTrailer absolutely mislead us about two important things, it's finally installed and working.
For any of you shopping a/c's at eTrailer, be aware that there is no owners manual with this model, and Dometic, which bought Atwood, doesn't have a manual for it either. (We did get the service manual, which helped the electrician.)
eTrailer had told me it was a "plug and play" replacement for our old Dometic Duo-Therm Quick Cool, and it certainly wasn't. Bare wires on both the new a/c end (save the plug for the new thermostat) and coming from our coach, so we had to hire an electrician. Finding one who would come out to us and work on an RV was not easy (only 2 out of the 15 I called), but he turned out to be an RVer himself who re-habs and flips older RVs on the side.
All is well now and we are happily cool as cucumbers!
Thank you, Jared, for a great channel! When we revive our channel, maybe you'd be willing to do an interview on Zoom with us?
To take just a tire off or do work on the bearings/brakes I use a tire aid as long has it hooked to the tow vehicle. Always try a tire aid before you go camping it may not be high enough so a board or two should help. I also carry a bottle jack and use 4x4’s under the jack.
Thank You Jared, I had no idea that is product existed. One is going in my RV now. A very safe option and compact.
I just wanted to say thanks! I have been in the RV transportation business and involved with the industry for over 10 years now I am rarely impressed by CZcams RV videos but you my friend actually have some great tips! Fairwinds and following seas from Central Pacific RV Transport Pismo Beach California!
Thank you that’s very kind.
RVs that have the torsion axels under them have to be able to jack on frame even to change a tire. It can damage components jacking on axel. So some way to reach frame is crucial.
The only thing I would add is a flat plate at the top to spread out the load on the frame being lifted. This supports the side walls of the frame.
Although it is not the easiest thing to carry around, I always bring my hi-lift automotive floor jack with me. That way, if I ever have a problem on the road, I can not only take care of it safely, but quickly as well. It usually goes in the bed of my truck, next to the hitch. It has gotten me out of a few jams over the years...
Must Have! Great video
Amazing information. I was stuck because the Andersen block didn’t bring the 5th wheel high enough. I needed another 1 inch and I didn’t have a bottle jack. It was 112 degrees.
Thank you for the video.
There is no way that either you or the manufacturer or anyone else is going to convince me that adding an 18 inch extension to the top of a bottle jack which already has a small footprint is a good idea. I bet I could push sideways on an RV jacked up with that extension and it would fall over, and don't even try it unless you're nearly perfect level and every wheel still on the ground is chocked and the rig should be hooked to the truck also. You have some good videos and good ideas, and maybe this one, in the right hands of a skilled individual with good mechanical knowledge could be used in an emergency, but for the average RVer out there on the road today that can hardly operate a pair of vise grips, should not be using this.
I agree. There’s a reason why house movers and riggers stack up timbers, it’s much more stable. I always carry a few pieces of 3x8 and 4x4 hardwood just in case.
We have a 12 ton Safe Jack kit with the stability base for our 5th wheel. The extensions save a lot of time and effort and negate the need for excessive blocking. I wouldn’t leave home without it!
Just came across your channel. Using all those extensions with that jack may work with no issues on a hard flat surface. Using the configuration you showed in this video on an uneven surface or ground could very possibly spell disaster for someone.
Could you do a video on leaf spring maintenance? Thank you for all your great videos!! Love it!!
This looks risky even on a solid flat surface. I can only imagine the instability on other surfaces. I always use blocks under the jack to reach my starting lift point. MUCH more stable.
I concur
Safe Jack has a stability base not shown in this video. There are also a flat (frame) and a U shaped (axle) top plates not shown, so no need for the blocking, or worries about the jack slipping.
I was thinking the same thing. I wouldn’t crawl under any vehicle that is just supported with a bottle jack. I’d at least add added support in case the RV moved and kicked out the jack.
Yea, imagine being on the side of the road and not a level surface
THANK YOU! I just very recently ran into this scenario on my truck. Had to have two jacks to change my tire. DEFINITELY going to get some.
Safe jack makes a nice base plate for jacks too.
This really looks like a good deal, I'm looking at the kits and will probably get one soon. I already have a 10 ton bottle jack but like your idea of having two. Love your videos.
I would add that a LOT of travel trailers do NOT have leveling jacks, only stabilizers, and that a lot of trailers have torsion axles, not leaf springs. That being said, I do agree that you should travel with a jack that can lift your trailer from the frame. We carry a floor jack and jack stands.
Good idea. I bought two 6 ton models these last year so I could do a two point lift .One in front of the axels and one behind.. or for what’re way it seems best for a particular job. it’s less stress on the frame or rig to lift from two points.. I also bought two stands to transfer weight off the jack if need be to be safer and more solid… the more the merrier… ha.
Good plan.
Personally I would Cary wood blocks.
With a little metal work you can also turn that Jack into a wood splitter and a jack, a bit slow but it works.
Very helpful
Great gadget for the bottle jack. We have a 2021 Rockwood 2205s We travel with a Big Red 12 ton bottle jack and two aluminum 3 ton jack stands. I like the idea of the extensions and may have to give them a try!
Thanks Tony
Always good idea to carry proper tools with you.
So true!
Have you seen the Bottle Jack Buddy? It's a 100% USA made axle saddle that fits right on a bottle jack. It's powder coated, very compact and allows the RVr to jack up right on the side of the road. I don't go anywhere with out my Bottle Jack Buddy...It's like $60 bucks and gets things done safely and quickly.
Just ordered the kit. I watched this video a few months ago and balked at the price. I recently jacked up my truck and then the trailer, wished I had just ordered the kit to make the job safer and faster. I did buy the kit after hearing you say "I wished I had bought the kit" instead of piecemealing it together. Done Bruddda. T wallet hurts but I know I will be safer the next time I jack anything up. I also let them know how I found them. I dropped your name 🤣
Glad it helped! sorry about the lighter wallet.
Great points on lifting your RV safely for tire changes and repairs. Thanks for some more great information. Take care and safe travels. Dave.
I know this sounds stupid but that's how most accidents happen. I had gotten my middle finger pinned under one of the wheels of my 5th wheel and the lci leveling system was in error mode so my wife could not figure out how to clear the error and lift the weight off my finger. It was my camping neighbor who had a bottle jack handy that saved my finger. I'm buying this bottle jack and put it in the rv cargo bay
I love my safe jack accessories. I also have the axle yolk for jacking up my truck!
That will come in handy. Better to be prepared
Your channel really is straight to the point with very valuable info. Thanks for this.
Thanks for the suggestion! I will be ordering some! I have had to use my bottle Jack to get my fifth wheel back on my truck after the motor started to fail and wouldnt lift the front of the trailer.
Greatly appreciated! I'm very inexperienced so your vidoes are extremely helpful! You're very clear, concise and easy to listen to!
I have a 40ft DP and there is now way I'm changing a 22.5 tire and I don't carry a spare. Nice job for a trailer.
Okay looks good
Grrr! It was just 2 days ago that I made the 75 mile drive to where I store my 5th wheel only to discover that my high-lift floor jack won't lift high enough to get my trailer's tires off the ground. So much for giving the trailer its first wheel bearing service. I made the 75 mile drive back home wondering how I was going to safely do the work.
This is one of the greatest tips ive seen lately, thank you
Ive had to change a tire on a flatbed with a truck on it. I had two jacks, but it would have been beneficial to have had the extentions. I had to get the frame up high enough to fit the bottle jack under it. A friend helped out trying to come up with the best configuration to be able to swap the tire. Planning ahead
I have the entire safe T jack system. Saw it recommended by BTBRV. Love the base plate that attaches to the bottle jack. Much safer than a simple bottle jack on the ground.
Because I have slipper springs my axles are totally isolated and I don’t have to lift the axle.
Great video
Nice! Yes at least I should have shown a wood base for softer ground.
Yeah, that's what I did. I already had a couple house jacks (from jacking up houses while working on them long before going fulltime in the RV.) They aren't very expensive and you can get a couple 20 ton for not much and have it with you for things you had no idea would happen when you got it for it's initial purpose.
So true
Wow, really great tips. But another reason why i bought an rv without leaf springs.
I have had trouble greasing my shackles. When you said taking the pressure off the leaf springs made it easier to grease the axle you caught my attention. I ended up buying the Milwaukee battery powered grease gun to get the grease in. That worked could you elaborate a bit on the mechanics of your procedure.
Yes, I have the same question. Must the weight be taken off the suspension to grease the wet bolts?
This is great, I need to look at these, thanks! I also added to our kit, a 3 in 1 Jack/Jack Stand combo, its a bottle jack in a jack stand, and as you lift, it locks like a regular jack stand so if the hydraulics of the jack were to fail, there is a safety device in place, it also has a large base pad, do soft ground is less of an issue, it does however take up quite a bit of space, but for me, its what make me most comfortable, couple that with a standard 10 ton bottle and the truck jack, Im carrying 3 options, but the extensions in this video I didnt know about. Thanks!!!
Great video! I have the bottle jack for all the same reasons but do not have the extender kit. I need to review and likely will get a kit as you mentioned. Thanks!! Take care.
Just purchased! Thanks
I Never leave home without one
Perfect, thank you! I’m ordering a kit right now.
Nice, glad it helped out.
Usually I put my little floor jack in the truck. While I was watching this I was like wait a minute I have a bottle jack in the garage. I am just going to leave that in my truck now since it is smaller.
Great video, by the way finally got my solar and multiplus 2 installed, your video helped with that thanks.
Thanks!
You’re welcome, thanks for watching
Thank you …… Great idea and a must have
Great review. This will serve as a double duty because I have a lifted Jeep. Thank you!
Another super video, Dankeschön 🌲🌟
Thanks .... I knew I forgot something!!!!
Great idea, thanks for sharing!
Awesome ideas.
What an awesome device, thanks for sharing it! I've had to change multiple flats and do other suspension work on my triple axle Grand Design Momentum and it's always a pain. I think this will greatly simplify the process for me going forward!
Great infoe
Thanks
Another great piece of info.
Great info. Thanks for this information, it was something I’ve never thought about.
Very useful information. Thanks for sharing the links.
That is awesome love the jack extensions
Thanks
Great suggestion
Thanks
Good Solid Information! Thanks for sharing!
I believe larger 5th wheels should have shock absorbers. Sure saves the trailer and stability. What is your feelings on this?
I have a triple axle 20,000lb GVWR toy hauler and the suspension is grossly inadequate. There's upgrades available now from the factor when you buy a new 5th wheel but unfortunately for me eventually I'll have to rebuild the entire suspension and braking system. These manufactures go with the cheapest possible option to maximize profits.
@@cruisinguy6024 thanks for reply. I had a 36’ 2011 Greystone (Heartland) trailing from BC to Arizona every winter. The end cap actually was coming off. Out of warrantee, I had to remount it with glue & more screws, sold it. I bought a Canadian made 2006 triple E Topaz with factory shocks, very well built. It’s my 5th wheel, I now know what not to buy. Many of my personal beliefs on 5th wheels, are confirmed by your videos. I have enjoyed watching your videos , always learn something. Brian Reese
Ordering a set next. Thanks.
Nice!
Great tip.
Perfect!
Thanks I didn’t know they made jack extensions.
You’re welcome.
Another great and informative video. I really like the look of the Safe Jack system.
Hi Jared this is Bob Lloyd from Prescott. Good video.
Excellent video 👍🏻
Just found your channel and wanted to say thanks for the info! Subscribed 👏
Hmmm... I would much rather use a wide base of blocks UNDER the bottle jack - it just feels like it would be more stable
Yes on soft ground I will toss a small block of wood under the Jack that will help with the Jack stability but the ram extensions feel more solid from when I have used multiple bricks and wood blocks to get it high enough.
Be safe out there. I get worried when people use a Long Neck Bottle (HAHA Pun INtended) Jack. It can slip very easily. I know that you are very aware of this and cautious when in operation but people need to know the safety implications. Good job here though.
Thanks Jared. Great video just ordered the kit👍🏼
Glad it helped.
Excellent info as usual. Thanks.
Thank you!
Great video Jared
I just subscribed to your channel yesterday and already I'm loving it. Your science-approach rocks.
If you consult on the side... I'm interested. Future Class C with compressor fridge (as per your last article I saw), solar (same), and having it done right...
Not a bad idea to add a small block of wood to the list for when on softer ground.
Great idea, I’m going to have to add that!
you can always use some short 2x8 pieces and 4x4 pieces wood to help ..ALWAYS...
Amazing that all the products you are promoting are out of stock
Typo in your description… screw “caller” is actually screw “collar”
Very helpful - again :) Thank you
Thanks
I was gonna use my truck scissor jack for changing a camper tire. Hydraulics can leak and not work especially in your time of need. Thanks for your video.
Never, ever rely solely on hydraulics to trust that you will not be crushed. After jacking, a pinned jack stand needs to be added before trusting life or limb.
Question why not just lift the trailer from the axle to get the tire off the ground to change it using a bottle jake ?
Yeah, I don’t think so. Not happening. Best to use a large, stable base if you must go that route
What if the trailer is not level and it is on uneven road surface. I would not use bottle jack on a filth wheel camper ever unless you have death wish.
HELP!
Jared, on one of your youtubes you showed us micro fiber towels that you recommended.
I can't find that CZcams!
Could you let me know what brand they were and where I can buy them.
REALLY ENJOY YOUR VIDEOS
hi…just thought i’d mention in your list of jacks etc, you put the wrong word for the collar…you mistakenly put caller…..a screw caller could mean a whole different thing…lol…..
Pretty cool I think I can make some I’m a welder if the cost isn’t too bad on the safe jack I’ll check it out but I might just make some I have a 8 ton and a 20 ton bottle jacks
If you’re able to make them the only thing you might need is the collar for the threads on the Jack.
@@AllAboutRVs I don’t think it’s a problem I’ve use hydraulic jacks to do many things in my trade so a collar is not a problem
I prefer a block under the jack, you know why. A wide base block give much more foundation so you dont have a thin straight up jack that will probably fall over. Sorry to disagree but I have done there many times. Do not be dangerous and gave a straight up toothpick that will fall over and hurt you. you will probably have a dirt, gravel, or uneven ground to put your jack on BAD IDEA
I love this. I am going out to see what size I need for my bottle jack.
Do you have 2 different kinds of bottle jacks?
Man I bought one of these from Walmart it’s tipped over and all that fluid inside spilled out. sucked. Haven’t replaced it yet.
Excellent! I have that same Big Red 10-ton bottle jack. Just want to verify that the 6-ton extension and collar will fit my 10-ton Big Red?
Wow, ignorance “was” bliss. Thank you for making this.