This cube isn't that bad please don't hate! Please subscribe and follow my insta: / uk_cuber Music: Music from Free To Use Music Track: 'Motion' by Ethan Sturock / ethansturock
1&2: Because you main a gan 3: Correct 4: Bad setup 5: Many people like a clicky feeling, so there is no right or wrong 6-10: It pretty much never pops with a good setup and you can just make it faster with lube when you feel the need to tighten it (Cornercutting is not bad for the tightness) 11: You can just say RS3M lol 12&13: Correct and of course it doesn't have adjustable magnets, it's a $9 cube lol (You can just buy a magnet kit for $1) 14: You can just easily do it with one side as well 15: Not nearly every cube has Maglev and the spring is a good tensioning system, too 16: Core not lubed 17: So much for a cube? 18: Glossy finish will come after a few solves (like 200) Didn't know it was a joke video, but here are the things that can't even be considered as an argument for not liking the cube
it feels so difficult to turn idk why like i have a gan 360 and its not magnetic and it turns SO MUCH FASTER is the reason because my moyu Rs3m has magnets?
So obviusly the complains about packaging and price were a joke, but I'm not really sure about the complains on the performance of this cube, which are kinda true, but they are true only when the cube is out of the box, and once you set it up, it's great! The only complain is that when you loosen it a lot, not really a lot, but enough for it to be really easy to turn, it pops like crazy, but that may also be because of the lube, just to be clear, I didin't loosen it a crazy amount
@Cubing Official, I agree there, I think that whilst some of the complaints where honest (the sound) there were a lot of jokes in this video. I think that this cube is great for the price.
You were making things. Like whatever you can just put some lube and make it smoother you can make it looser certainly. Is there any problem with those. This cube does offer an spring compression system. Look at other cubes at this price.
So, 1. I could put some lube in the cube and I could make it looser but that doesn't massively improve the corner cutting. 2. Yes, this is the best budget cube and when you look at other cubes at the same price, you realise how good the RS3M actually is, however (apart from the last point) I tried to exclude money from this video and really just ignore that factor as I think people only like this cube for the price and instead I wanted to see the negatives of the RS3M. 3. I needed 20 bad things and I really struggled to find that many! Which means some of them may be slightly exaggerated.
My rs3m is setup well fast smooth 2021 maglev version btw with n52 5.1 magnets in corners and edges but when I turn fast like it just locks up and sometimes my fingers go inside the cube when turning fast
@@UK_Cuber yeah like it very very locky I'm thinking to buy a rs3m 2020 not the maglev version or even better I have some 5x2 magnets laying around so I'll magnetize a yuxin little magic and also my turning is SO accurate but it still locks up 🥲 I'll buy the yuxin little magic now
Bro rs3m is one of the best cube just set up the rs3m and gan is ur main and rs3m is a budget cube if u dont like the spring thing just buy a magnet for the center and if u dont want to turn it like a block just put it some lube and if u upgrade ur rs3m like core edges magnets and center magnets it will be cool
Well there were a lots of jokes in the video. You don't have to take it that seriously. I found out that he was joking after hearing that "IT IS EXPENSIVE". So, there's no point to think that this cube is bad. It's not only great, but the best cube at this price range.
@@UK_Cuber true. I know that. Because, I do have a moyu rs3m. But, I didn't lubed it (because, after lubing meilong/moyu cubes they become stiff after few solves).
Funny you say that, I am currently editing '20 things I hate about the GAN 12' which will be out very soon. Yes, it is a 'good' cube but I think there are some downsides that needed to be mentioned.
@@UK_Cuber I just ordered this cube about an hour ago lol despite your great video I've seen that this cube is great for the price and it is my first cube so it is what I plan to learn on
1&2: Because you main a gan
3: Correct
4: Bad setup
5: Many people like a clicky feeling, so there is no right or wrong
6-10: It pretty much never pops with a good setup and you can just make it faster with lube when you feel the need to tighten it (Cornercutting is not bad for the tightness)
11: You can just say RS3M lol
12&13: Correct and of course it doesn't have adjustable magnets, it's a $9 cube lol (You can just buy a magnet kit for $1)
14: You can just easily do it with one side as well
15: Not nearly every cube has Maglev and the spring is a good tensioning system, too
16: Core not lubed
17: So much for a cube?
18: Glossy finish will come after a few solves (like 200)
Didn't know it was a joke video, but here are the things that can't even be considered as an argument for not liking the cube
Yeah, these are all reasonable responses.
14: i literally own a tornado v3 flagship and its a spring cube, idc abt the maglev ngl, i just want it turning smooth asf
Cope
@@johnpantag472 Hahaha
isnt the sticker literally removeable
Bro just angered the entire cubing community
Light work!
finally a video talking about it's cons, all the vids just talk about how good it is but not the downsides 🤦♂️
Yes, I sometimes think people get carried away with its price and don't actually think about its bad parts.
it feels so difficult to turn idk why like i have a gan 360 and its not magnetic and it turns SO MUCH FASTER is the reason because my moyu Rs3m has magnets?
Bro really expected a lot (especially adjustable magnets) from a BUDGET cube
Bro is complaining about his wet hands💀💀☠☠☠☠☠☠☠☠
💀💀💀
Can you do gan 12 maglev and reverse things like its too cheap , magnet strenght is too light
We're on the same track here (already on my video ideas, coming out soon). 👀 👀 👀
Uk cuber what are ur opinions on the Moyu Wrm 2019?and would u recommend it over the wrm 2021?
Btw im maining the wrm 2021 maglev
So I haven't got the WRM 2019 so I'm not to much use here! I know that the WRM 2021 is a great cube and I would love to try the maglev version.
@@UK_Cuber Thanks for ur opinion😁
I really think the spring contribute to it being slower, so I just bought a maglev kit.
Nice, that should help speeding the cube up with the reduced friction
troubleshooting:
#16 swap the maglev from the center piece of rs3m 2021
#18 buy the stickered blackbase version of rs3m 2020
Great suggestions but if I'm being honest, I was struggling to find things to complain about so I might have been slightly over exaggerating.
So obviusly the complains about packaging and price were a joke, but I'm not really sure about the complains on the performance of this cube, which are kinda true, but they are true only when the cube is out of the box, and once you set it up, it's great! The only complain is that when you loosen it a lot, not really a lot, but enough for it to be really easy to turn, it pops like crazy, but that may also be because of the lube, just to be clear, I didin't loosen it a crazy amount
But its cheap
@Cubing Official, I agree there, I think that whilst some of the complaints where honest (the sound) there were a lot of jokes in this video. I think that this cube is great for the price.
You were making things. Like whatever you can just put some lube and make it smoother you can make it looser certainly. Is there any problem with those. This cube does offer an spring compression system. Look at other cubes at this price.
So,
1. I could put some lube in the cube and I could make it looser but that doesn't massively improve the corner cutting.
2. Yes, this is the best budget cube and when you look at other cubes at the same price, you realise how good the RS3M actually is, however (apart from the last point) I tried to exclude money from this video and really just ignore that factor as I think people only like this cube for the price and instead I wanted to see the negatives of the RS3M.
3. I needed 20 bad things and I really struggled to find that many! Which means some of them may be slightly exaggerated.
My rs3m is setup well fast smooth 2021 maglev version btw with n52 5.1 magnets in corners and edges but when I turn fast like it just locks up and sometimes my fingers go inside the cube when turning fast
That's interesting, I haven't gotten that issue before.
@@UK_Cuber yeah like it very very locky I'm thinking to buy a rs3m 2020 not the maglev version or even better I have some 5x2 magnets laying around so I'll magnetize a yuxin little magic and also my turning is SO accurate but it still locks up 🥲 I'll buy the yuxin little magic now
Or I'll just unmaglev my rs3m and save some bucks 😐
I just ordered the moyu rs3m and I'm about to cry before i realized it was a joke
Haha, sorry about that one! You are sure to like it as it's a great cube
Bro rs3m is one of the best cube just set up the rs3m and gan is ur main and rs3m is a budget cube if u dont like the spring thing just buy a magnet for the center and if u dont want to turn it like a block just put it some lube and if u upgrade ur rs3m like core edges magnets and center magnets it will be cool
I break a piece and breaked all cube for setting and its not assembling worst I purchased today
I've never had that issue but that is a real shame for you.
the only thing i agree is number 16
I’m not hating but I think the RS3M 2020 is amazing! But its a personal opinion :)
A satisfying opening for 9$? Bruh u talked too much about the box bro
I hope you realised this video was a joke
@@UK_CuberYea I hoped this was a joke and it became real lol
Well, by your turning, I had tht feeling u put it on 7 clicks, and rammed tht screw wayyyyy into the core.
But i hate tht sticker too.
Haha, I like a tight cube! Yeah the sticker does look and feel annoying
@@UK_Cuber i would peel tht s- off my mf3, but its been there so long it feels like something's missing without it
Hi my cube is a rs3m 2020 do uou realy hate the rs3m 2020 or just a joke
No, this is just a joke!
Whatever you say.I felt it better than gan.
"Cost too much" I got mine for 1 USD lol +lube
That's simply too expensive!
I'm watching this cuz I'm starting to disappoint to my rs3m 2020.
Fair enough
Well there were a lots of jokes in the video. You don't have to take it that seriously. I found out that he was joking after hearing that "IT IS EXPENSIVE". So, there's no point to think that this cube is bad. It's not only great, but the best cube at this price range.
I think you can probably tell from all the jokes that I definitely didn’t take this seriously and the RS3M is a great cube.
@@UK_Cuber true. I know that. Because, I do have a moyu rs3m. But, I didn't lubed it (because, after lubing meilong/moyu cubes they become stiff after few solves).
I ordered it and see this Video hope i dont get disapointed its my first speedcube
No this video is a joke! The RS3M is a great cube and an amazing first speedcube
Relax guys bro didn't had content
I known its your opinion, but you compare the weight of a 9 dollars cube with a 90 dollars cube
Haha, it was just a joke.
@@UK_Cuber unfunny joke :|
The cube is only 9$ and it’s expensive 😂
Just a joke!
Why do you think a 9 dollar cube is expensive😂
It is a joke video
When you use gan too much
GAN is incredible!!!
This guy is the master of clickbaiting xD
Don't think that is a good thing but I'll take it
@@UK_Cuber It is haha, it made my day.
This is so dramatic 😂
My RS3M sounds better than the gan 11, 12, and XS
Lucky! Mine doesn't sound too bad but not a good as the GAN cubes.
you just said that its blocky but its getting blocky cuz of ur tiny babay hands
It's a joke, wasn't supposed to be taken seriously
Hey, what did you expect from a 9 dollars "flagship" cube? :D
Jokes aside, moyu wrm 2021 is def way better but I think the rs3m is quieter
Yeah, but the WRM is a fair bit more expensive.
lol
Haha
this was the most funny video I have seen in a long time thanks to you we have a great cubing community and great videos.
you're joking right? lol please tell me you're joking
Yes, some is truthful but most is a joke!
Bruhhh you need to set it u
Yeah, I know
It's 9 dollars
It's a joke!
Ur evil its very good for 9 fricking dollars way better than than that fricking gan 12 maglev
Funny you say that, I am currently editing '20 things I hate about the GAN 12' which will be out very soon. Yes, it is a 'good' cube but I think there are some downsides that needed to be mentioned.
@@UK_Cuber 9 dollars bruh
Rs3m 2020 is the best not the stupid gan cube
That's subjective but you are entitled to your opinion
@@UK_Cuber GAN CUBE is keeps on flying because it is not heavy
Skill issue
This whole video is subjective and is my opinion and it is clear that you opinion is different which is okay.
Useless points
This video is over reacting lol
Yeah, some (most) might have been over reacting.
Bruuuuuhhh…. Stop
🤣🤣
Glad you found it funny
@@UK_Cuber I just ordered this cube about an hour ago lol despite your great video I've seen that this cube is great for the price and it is my first cube so it is what I plan to learn on
You want a tissue lol
Haha, I don't really hate the RS3M and you can probably tell I was struggling to think of things near the end.
Skill issue
Haha, very likely!