HPI Baja 5B SBK Flux 8s first and second run
Vložit
- čas přidán 25. 08. 2024
- HPI Baja 5B SBK Flux:
- Beast Pro 56112SL 700kv Brushless Motor (14t pinion)
- Hobbywing Ezrun MAX5 V3 200A Brushless ESC
- 2x GensAce 4s 8000mAh Bashing Pro Series Lipos (8s)
- Savöx SV-0236MG Servo
Run on 27.12.2022 .. Servo Saver arm broken
Seriously thinking about building one, what’s the battery tray like. Can you fit 2 hard case 4s ?
Official battery tray size is: 200 x 84 x 47mm. i am fitting 2 Gens Ace 8000mah (soft case) side by side which are 55mm wide each. Exact size: 157x55x42. And width wise i have still some wiggle room.
@@othellosmodellbau9591 thanks so much mate, keen as to get one built. May use an 1100kv motor that i have
im seriously thinking about getting the baja flux. how was the build?
As the gas and flux version is packed in one build manual you have to hop a little bit between building stages and pages. Sometime you will have to look for screws and bags. But nothing was missing and the build went on as detailled in the manual.
Hi, what servo you use?
Hi, Savöx 0236MG