TA-0404: Abestop AT312G DMM Generator Oscilloscope Meter 3 in 1

Quick testing the AT312G 3in1 DMM with dial.
Cool the Generator can run while in Scope mode.
Abestop AT312G go.tonyalbus.c...
Related Tools:
Volt/Current Pro LB02A go.tonyalbus.c...
DMMcheckPlus go.tonyalbus.c...
Volt/Cur FNIRSI SG003A go.tonyalbus.c...
Voltage/Current LB02G go.tonyalbus.c...
Related Items:
MusTool MDS9208 go.tonyalbus.c...
Tooltop ET928 go.tonyalbus.c...
Zoyi ZT702S go.tonyalbus.c...
Zoyi ZT703S go.tonyalbus.c...
Zoyi ZT703S go.tonyalbus.c...
#abestop #AT312G

[@EfieldHfield_377]

I find it hard to imagine who this would be useful for. The font is too… fill in the blank something negative… to useful as a handheld meter and as a scope like it lacks a proper probe and the display too small for a scope. Maybe I’m old but I consider the modern scopes portable. Thx for sharing.

[@TonyAlbus]

Thank you, yes some good point there... maybe we need to see it as a quick test, if you are on AC just to see how AC it is... just for low frequencies..

[@zdzisiek1979]

ciekawa konstrukcja. Pozdrawiam

[@TonyAlbus]

Yes seems strong.

[@chevylization]

I'm against multi-tool style multimeters, but might be a good trowa-round meter if it wasn't that expensive.

[@TonyAlbus]

Thanks! yes i think i agree

[@sbelectronicaindustrial6652]

👍👍👍👌👌👌.....

[@TonyAlbus]

Thank you!

[@schorsch4496]

I don't like the display of the digits. They should use a simple, clear font.

[@TonyAlbus]

Yes good point!

[@mp1454]

😊👏👌

[@TonyAlbus]

Thank you

[@ssalient]

"Scope" without BNC.. nothing more than a gimmick and maybe just useful for AC 50/60Hz waveforms.

[@TonyAlbus]

Upto 1 MHz is works fine.. but they are in a price range were you can get so many others also.

[@thiloreichelt4199]

Perhaps usable up to 1MHz. But that excludes e.g. mikrocontroller tact generation. Also, one channel only.
Ok, you can use it to check e.g. signal quality on a line. But if I am concerned about the quality of a signal, it is probably pretty fast. Slow signals are generally not that critical.
Probably good for someone who tinkers with analog audio equipment.

[@TonyAlbus]

@@thiloreichelt4199 Yes good point, also i noticed today, that the time base could go very slow... so the power form this meter is, that is can do that... they should have adverticed that instead of 12 MHz that is very unrealistic...