Troubleshooting the Wolverine MoiveMaker Pro 8mm Digital Converter - Won't Start
Vložit
- čas přidán 13. 09. 2024
- One day my Wolverine 8mm Pro Digitizer wouldn't start. When I powered it on it would just reboot and wouldn't bring up the menu options.
I figured it was a problem with the motor. So I opened it up and unplugged the motor. Sure enough it started right up.
I don't use the motor to pull the film since it causes the film to jitter.
See this video to see my set-up: • Wolverine MoiveMaker P...
Get the Wolverine Pro on Amazon:
amzn.to/30FyBdw
------------------------------------------------------------
Music by Epidemic Sound: www.epidemicso...
Thumbnails by: www.canva.com/...
---------- Disclaimer ----------
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
#gcast
i was so upset when mine started acting up i was not looking forward to having to replace it. but this fixed it it is brilliant I don't like having the film just go into a box its unnerving but its working thankyou so much
Glad it helped, I noticed the quality of my scans are better without it
oh really that is amazing to hear @@GCast
Hi! I need some help, hope you'll know what to do... my Wolverine won't start either, I've worked with it for a whole year, 500+ files and today it just didn't start at all, I hold the power button and nothing happens, any idea about how to solve this issue?
The issue I had was with the reel motor, so I just disconnected it
Thanks for this, same problem here. This worked. Just let the film run into a bucket then rewind it later. What do you want for $400 right?
Thank you! How did you figure out it was the take up reel?
Glad it helped you out. I just got lucky with that one.