Toyota 2SDK8 SDK8 SDK7 Bradco 9MD2 Backhoe Digger Attachment, Part 13
Vložit
- čas přidán 28. 08. 2024
- Bradco 9MD2 backhoe attachement. The 9MD2 was the original Toyota backhoe sold with the Toyota skidsteer, just painted orange and rebranded as a Toyota model. It is also available as an 8MD2 and 11MD2.
9MD2 parts list:
6980: Seat
45135: Filter spring
45133: 90 micron inline filter
52613: Pin (2) H-bracket
69877: Pin, Bucket adjuster
54414: 1.38x.50 Poly roller guide
64895: Cylinder 2.50x1.25x11.62 - Horizontal swing cylinder
61863: Cylinder 3.25x1.50x11.88 - fold down stabilizer
64521 Cylinder 2.75x1.75x17.56 - bucket cylinder
68267 Boom cylinder
68270 Dipper cylinder
Full parts manual: lilevo.com/lil...
Thanks for your detailed descrition of the work and money you had to put in. I was looking to buy one for 2k that has been sitting in a field for a few years...will not.
Better off spending 4-6k for a clean like-new one! That's how much you will end up spending in refurbish. Older ones like these I wouldn't pay more than $500-$1000 for.
Cool seems really jerky try and feather the controls it mite help, im sure u will get the hang of it
Alright I’ll give it a try,Thanks
I just picked up the original 80’s toyota 9HD backhoe for mine with the correct original toyota mount bracket with the wedge pins on top. The quick tatch on mine has nothing to do with the backhoe. It dosent connect at all on the factory toyota setup. You gotta hook hoses up and lift with outriggers and the boom to get it lined up then drop in the wedge pins when you drive into it.
The part that slides under the bucket and then you push the handle down to lock it in place
No, that stays. It can lock in your adapter plate that holds the backhoe if you design it that way. I don't think it's necessary to use though
I’m trying to figure how to send pictures to show what I’m working with,I can’t figure it out.
You can contact me here and I will email you: lilevo.com/contact/
i just got the bradco 9hd for my 2sdk8. can you send me some pics showing what u had to modify to get it to attach correctly?
I'll do a video on it. Seems like I get asked this a lot
that would be awesome thank you
@@shanem4340 video up czcams.com/video/wqlmHBgPbTo/video.html
Mine has the correct brackets and it says Toyota on the backhoe,I just don’t know how I’m supposed to lift it to attach it and is it supposed to be lifted by the actual lifting arms.
Once you remove the bucket it should be pretty obvious. The bottom pins lock into the bottom of the backhoe bracket, the top will rest in the top portion then you can lift it up and down. The arms just lock into the chassis so it doesn't bleed down from the weight.
If you have the original Toyota mount the quick attachment has no contact with the backhoe. You just lift the backhoe by outriggers and boom to get it to right height then drive into it and drop in the top wedge pins where the mounts are on top.
Does anyone know of a video that shows how to attach this to the SDK8?
You would either need to buy a Toyota specific backhoe that comes with the correct mounting plate and clamps, or buy an off the shelf mounting plate and weld/modify it to clamp onto the Toyota structure.
According to the guy I bought the backhoe attachment from it was specifically made for the Toyota skid steer. It has the lower hooks and it has the pins that hold it in place,but I don’t see away to lift it with the quick attachment
@@warrenjackson4869 can check out the FB group for these and post pictures: facebook.com/groups/400721317504528
Do I have to take the quick connect off
What do you mean?