Thank you Casper! This was exactly my problem, and now, thanks to your great tutorial I can solve it! It looks really incredible that there is a similar bug about registration and multipads after so many firmware release....
Dear Casper, I found a really efficient and easy way to do that differently, without having to use additional Registrations to stop the previous ones. The only downside of it, is that it works for a specific song that you play. - I will explain it further ahead. The Idea is that if a Multipad does not repeat itself, then it will be eventually stop at a certain time that you determine, and it will not continue operating when you switch to the next Registration. This is true, assuming that most people deal with Multipads that are simple and that have a short phrase. O.K., so the way I do it is: - Switch OFF the Multipad "Repeat" option, - Then, in the "StepEdit" section you limit the time of each note in the phrase (you can shorten it or extend it as much as you need). I determine the time-range of the note upon the length of the song-part that right after it I switch to the next registration. This way, the Multipad will end and stop right before I change to the next Registration. Since most Multipads have a simple and short phrase, it is very easy to do. So, although it works only for a specific song that you play, it is so quick and easy to program, that you can do it for any other song as well. It works great for me, and I don't have to use additional Registrations to stop the previous ones. If you like this solution, it will be great for everyone here If you could demonstrate it in one of your great videos.
Dear Lahav, thanks for the suggestion and good advice for using the multipad. If I understand correctly, you envisioned something similar to what I described in this video. czcams.com/video/OiWiZm7zYmQ/video.html However, it would be best if Yamaha would enable new functions for the multipad, then there would be no need for such interventions.
Dear Casper, thanks. As you said, we hope that Yamaha will fix that fault in their next upgraded firmware. Your video you referred to reminds it, but, until Yamaha fix this problem, I found that for me, I can use it with every built in Multi-Pad, stop the Repeat function, limit the phrase time and there I have much easier solution than adding another Registration action to stop a Multi-Pad. Addition registration action is not a good solution for me, especially when I perform in front of an audience. It's just not practical. If I limit the Multi-Pad time, I don't have to worry about additional Registration action, and although it matches a specific song, It is very easy and quick to do (it takes maybe 2 minutes to set it up). Take care and I'm looking forward for your next videos.
Brilliant! I used to reduce the multipad volume to zero and save it in the second registration instead, but your trick is better. Yamaha could think about this use case actually, maybe in Genos 2 :) Well done and and thanks for sharing this idea.
Casper, It was also written in the past, make a multipad with for empty parts in it. Better is that Yamaha do sommething about this problem. Ad Koolmees the Netherlands.
And it is a good approach, but it has one drawback. If you directly start a new multipad, it will not be heard because the Volume is set to zero. I follow your channel, you have great performances.
Very good video tutorials. I propose to record the synchronization of the song - wav / multipad link / with the midi file - lyrics , VH/. I use this sync quite often. Regards Anatol - Poland
Thanks for your tutorials Casper they are very useful and simple in the explanations. If I may I would like to ask you a question about multipads; are you aware if the sycro stop is activated and the multipads on hold are active I play a chord and the multipads start I release the chord (left hand) and the accompaniment stops together with the multipads I practically break there is a possibility that after the break do the multipads restart automatically? I hope I was clear and thanks if you answer me
@@CasperVideo Thanks for the reply, I thought it wasn't possible. I had tried everything and failed. You should implement this function of multipad stop and go to create a break. Yamaha should provide. Good music Casper
Please advise: I have a programmable Korg nanoPAD2 and I want to use its pads to turn each pad on and off individually on my Yamaha sx900. Where can I find a list of CC#/MIDI/Program Change/Control message commands and is this even possible with my Yamaha SX900?
Look in this document but I don't think the specification you are looking for is there. europe.yamaha.com/files/download/other_assets/3/1131013/genos_en_dl_f0.pdf You can help yourself by recording the sysex string sent by the keyboard. Use the Mixmaster program for that czcams.com/video/EmR7WAjjKVI/video.html
Drago mi je da ste izbacili novi klip…da li mozete da napravite jedan klip kako detaljno srediti „boje“u YEM-u… i da li moze da se urade kobinacije dve ili vise boja da bude kao jedna…hteo bih kombinacije a i terce tako da uradim bez registacie memorije…da bude na primer kao na korgovim klavijaturama…ako je moguce..hvala
Ne znam koliko ću imati vremena, izrada takvog klipa zahtjeva dosta truda. Ne zato jer je to kompliciran postupak nego zato što ima mnogo različitih opcija koje treba spomenuti. Pokušati ću ti pomoći ovako. Pogledaj ovaj klip, czcams.com/video/1kFhui-U1SI/video.html tu prikazujem kako s tvorničkim zvukovima slagati više elemenata. Elementi su ti ovdje fokus jer ti oni trebaju da napraviš terce koje spominješ. S tvorničkim zvukovima ne možeš napraviti terce jer ti treba multisample gdje će svaki ton biti poseban uzorak/sample. Njih ćeš u YEM unositi na ovaj način czcams.com/video/TKIC9L-mH78/video.html prikazan je drum ali isti je postupak za voice. Kada dodaš USER voice u YEM, slažeš ih u novi element ovako czcams.com/video/1kFhui-U1SI/video.html?t=68 Da, ima dosta posla i možda ti ove "razbacane" na brzaka upute stvore konfuziju ali ako pažljivo sve pročitaš i ako pogledaš sva tri videa baš na mjestu gdje sam ih markirao, napravit ćeš posao.
Pozdrav imam pitanje uvezi programa audio phraser Kad ubacim file u njega wave izbaci mi error neda da ubacim file u njega Dali ima neko rjesenje za to
It can also be accessed that way. A problem arises if we want to activate a new MP directly, without registration. Then we need to turn up the volume again. In what sense is the method you propose more flexible?
Jučer sam odgovorio na mail jednom drugom useru, a pitanje je identično tvome. "Nisam s eksperimentirao, ne postoji funkcija Key Off ali ti pokušaj sa Key On Delay, nalazi se kod General > Element. Mislim da bi s tim mogao dobiti isti učinak."
@@SUKIKORG Ne može se ništa učiniti po pitanju KEY OFF funkcije. Ona ne postoji i ne možemo zvuku definirati kako će zvučati u trenutku otpuštanja tipke.
Hold the SELECT button at the multipad, select one or more multipads (00:21). If SYNCH START is turned on at ACOMP, you immediately have synchronized multipad and Style.
I think I understand the question now. One Multiapad bank is automatically connected to each Style. It is permanently determined by the factory rhythms, and if you want to make a different selection, you have to save it in the USER style. Watch this video, you can activate the subtitles and the language that suits you. Feel free to ask if something is not clear to you. czcams.com/video/vpPLs2bdYQw/video.html
It is also a good solution, but it has one drawback. If we next start multapad directly (without using registrations), the volume will be at the value 0 and will not be heard.
I believe the Yamaha doesn't know about this trick.
You are genius. Thanks
Happy to help
Thank you Casper! This was exactly my problem, and now, thanks to your great tutorial I can solve it! It looks really incredible that there is a similar bug about registration and multipads after so many firmware release....
Glad it helped!
Dear Casper, I found a really efficient and easy way to do that differently, without having to use additional Registrations to stop the previous ones.
The only downside of it, is that it works for a specific song that you play. - I will explain it further ahead.
The Idea is that if a Multipad does not repeat itself, then it will be eventually stop at a certain time that you determine, and it will not continue operating when you switch to the next Registration.
This is true, assuming that most people deal with Multipads that are simple and that have a short phrase.
O.K., so the way I do it is:
- Switch OFF the Multipad "Repeat" option,
- Then, in the "StepEdit" section you limit the time of each note in the phrase (you can shorten it or extend it as much as you need). I determine the time-range of the note upon the length of the song-part that right after it I switch to the next registration. This way, the Multipad will end and stop right before I change to the next Registration.
Since most Multipads have a simple and short phrase, it is very easy to do.
So, although it works only for a specific song that you play, it is so quick and easy to program, that you can do it for any other song as well.
It works great for me, and I don't have to use additional Registrations to stop the previous ones.
If you like this solution, it will be great for everyone here If you could demonstrate it in one of your great videos.
Dear Lahav, thanks for the suggestion and good advice for using the multipad. If I understand correctly, you envisioned something similar to what I described in this video.
czcams.com/video/OiWiZm7zYmQ/video.html
However, it would be best if Yamaha would enable new functions for the multipad, then there would be no need for such interventions.
Dear Casper, thanks. As you said, we hope that Yamaha will fix that fault in their next upgraded firmware. Your video you referred to reminds it, but, until Yamaha fix this problem, I found that for me, I can use it with every built in Multi-Pad, stop the Repeat function, limit the phrase time and there I have much easier solution than adding another Registration action to stop a Multi-Pad. Addition registration action is not a good solution for me, especially when I perform in front of an audience. It's just not practical. If I limit the Multi-Pad time, I don't have to worry about additional Registration action, and although it matches a specific song, It is very easy and quick to do (it takes maybe 2 minutes to set it up). Take care and I'm looking forward for your next videos.
Brilliant! I used to reduce the multipad volume to zero and save it in the second registration instead, but your trick is better. Yamaha could think about this use case actually, maybe in Genos 2 :) Well done and and thanks for sharing this idea.
Glad it helped!
Hello, thank you for your videos and explanations on how to work with Yamaha aranger keyboards.
My pleasure!
Casper, It was also written in the past, make a multipad with for empty parts in it. Better is that Yamaha do sommething about this problem. Ad Koolmees the Netherlands.
This is an informative video nice trick i enjoyed it.
A problem that i never thought of, good tutorial and simple fix btw
That's great! Why I didn't think to use this tricks before? Thank you very much! 👍
Glad you liked it!
Cool trick! I do it with the volume => 0 on registration. ✌️😉🎹🎶
And it is a good approach, but it has one drawback. If you directly start a new multipad, it will not be heard because the Volume is set to zero.
I follow your channel, you have great performances.
@@CasperVideo Thank you for following 🤝! Yes, about registration you’re right! 😉
Parabéns pelas vídeos aulas,nos ajuda muito você tem algum sobre criar batidas de guitarra com mega Voice?tenho um tyros 4
I didn't make a video like that. There is only one that talks about how to remove megavoice tones.
czcams.com/video/PRwXTQbqxfo/video.html
Very good video tutorials. I propose to record the synchronization of the song - wav / multipad link / with the midi file - lyrics , VH/. I use this sync quite often. Regards Anatol - Poland
Thanks for your tutorials Casper they are very useful and simple in the explanations. If I may I would like to ask you a question about multipads; are you aware if the sycro stop is activated and the multipads on hold are active I play a chord and the multipads start I release the chord (left hand) and the accompaniment stops together with the multipads I practically break there is a possibility that after the break do the multipads restart automatically? I hope I was clear and thanks if you answer me
Thank you. I understood what you are asking. When playing with SYNCRO STOP there is no way to make the multipad start automatically with the Style.
@@CasperVideo Thanks for the reply, I thought it wasn't possible. I had tried everything and failed. You should implement this function of multipad stop and go to create a break. Yamaha should provide. Good music Casper
Informativ...is it possible to use preset multipads in styles, when we create our own style file?if possible please make a vdo..we are waiting.
It's possible. The video has been around for a long time.
czcams.com/video/3MFKl9eIYGY/video.html
Please advise:
I have a programmable
Korg nanoPAD2
and I want to use its pads to turn each pad on and off individually on my Yamaha sx900. Where can I find a list of CC#/MIDI/Program Change/Control message commands and is this even possible with my Yamaha SX900?
Look in this document but I don't think the specification you are looking for is there.
europe.yamaha.com/files/download/other_assets/3/1131013/genos_en_dl_f0.pdf
You can help yourself by recording the sysex string sent by the keyboard. Use the Mixmaster program for that
czcams.com/video/EmR7WAjjKVI/video.html
👍👍👍
Drago mi je da ste izbacili novi klip…da li mozete da napravite jedan klip kako detaljno srediti „boje“u YEM-u… i da li moze da se urade kobinacije dve ili vise boja da bude kao jedna…hteo bih kombinacije a i terce tako da uradim bez registacie memorije…da bude na primer kao na korgovim klavijaturama…ako je moguce..hvala
Ne znam koliko ću imati vremena, izrada takvog klipa zahtjeva dosta truda. Ne zato jer je to kompliciran postupak nego zato što ima mnogo različitih opcija koje treba spomenuti. Pokušati ću ti pomoći ovako. Pogledaj ovaj klip,
czcams.com/video/1kFhui-U1SI/video.html
tu prikazujem kako s tvorničkim zvukovima slagati više elemenata. Elementi su ti ovdje fokus jer ti oni trebaju da napraviš terce koje spominješ. S tvorničkim zvukovima ne možeš napraviti terce jer ti treba multisample gdje će svaki ton biti poseban uzorak/sample. Njih ćeš u YEM unositi na ovaj način
czcams.com/video/TKIC9L-mH78/video.html
prikazan je drum ali isti je postupak za voice. Kada dodaš USER voice u YEM, slažeš ih u novi element ovako
czcams.com/video/1kFhui-U1SI/video.html?t=68
Da, ima dosta posla i možda ti ove "razbacane" na brzaka upute stvore konfuziju ali ako pažljivo sve pročitaš i ako pogledaš sva tri videa baš na mjestu gdje sam ih markirao, napravit ćeš posao.
@@CasperVideo hvala Vam puno
Pozdrav imam pitanje uvezi programa audio phraser Kad ubacim file u njega wave izbaci mi error neda da ubacim file u njega Dali ima neko rjesenje za to
Provjeri da je uzorak ovih karateristika
Compatible file format: WAV format; 44.1 kHz sample rate, 16-bit resolution, stereo
Show!!!!!
✌
Why not just turn down the multipad volume and save that into the registration. Does the same job and more flexible.
It can also be accessed that way. A problem arises if we want to activate a new MP directly, without registration. Then we need to turn up the volume again. In what sense is the method you propose more flexible?
Pozdrav Dali ima KEY OFF opcija na Yemu. Kad recimo pustim dirku da se cuje ton i dalje
Jučer sam odgovorio na mail jednom drugom useru, a pitanje je identično tvome.
"Nisam s eksperimentirao, ne postoji funkcija Key Off ali ti pokušaj sa Key On Delay, nalazi se kod General > Element. Mislim da bi s tim mogao dobiti isti učinak."
@@CasperVideo hvala puno
@@SUKIKORG Ne može se ništa učiniti po pitanju KEY OFF funkcije. Ona ne postoji i ne možemo zvuku definirati kako će zvučati u trenutku otpuštanja tipke.
Hello sir casper. How can I link a multipad with the style without saving the registration
Hold the SELECT button at the multipad, select one or more multipads (00:21). If SYNCH START is turned on at ACOMP, you immediately have synchronized multipad and Style.
I mean something else, how can I send you a video explaining the request
@@abdalrhn Put the video on your channel and keep it in "Unlisted" status. Then send the video link to my email.
www.youtube.com/@CasperVideo/about
@@CasperVideo czcams.com/video/erINFvoldOY/video.html
I think I understand the question now. One Multiapad bank is automatically connected to each Style. It is permanently determined by the factory rhythms, and if you want to make a different selection, you have to save it in the USER style. Watch this video, you can activate the subtitles and the language that suits you. Feel free to ask if something is not clear to you.
czcams.com/video/vpPLs2bdYQw/video.html
Dva glumca iz Keyboard Academy su ti ukrali patent🤔
He he. Uloga glumaca i jest da kopiraju druge ;-)
Cześć, przydatny materiał, ale można też w taki sposób wyłączyć odtwarzanie MP
czcams.com/video/4Ea0ep31SeE/video.html
It is also a good solution, but it has one drawback. If we next start multapad directly (without using registrations), the volume will be at the value 0 and will not be heard.
@@CasperVideo
Yes you are right
Pozdravi iz Poljske
@@arkadiuszlominski Hvala, pozdrav i tebi iz prijateljske Hrvatske!