I did this job on my 3.0 last month. I dropped the transmission and did it with the engine still on. I had the workshop manual which helped a lot but not as much as your video. Sir, you are a true master. Thank you so much!!!
Thank you so much brother you help me alot🙏 But my question is what can i use to lock camshaft and crankshaft position if i don't have timing tool set?
I did use a Plastic cup that's came with a new water pump connected with cable to the engine for safety, and safety glasses must be used , this is my way to test engine compression.
This engine timing chain is located at the back so you have to turn the harmonic balancer clockwise to check for timing marks is correct???? Well explained bro keep it up 👍👍👍
Hello Mr. Hanish, it is exactly how i did explain it in this video, when turning the engine from front at the fun's drive belt is located, turning to the right in the same time if looking to the back of the engine timing will be turning to the left and all chain tensionners are located to work with this engine to turn to the left because timing chain are located at the back of the engine, so when working on this engine to set the timing chain at the back of the engine you can not turn it to the Right from the Flywheel !!! put if you are turning the engine from the front of the engine at the harmonic balancer , you can turn the engine to the Right Because the timing chain at the back of the engine will be turning to the left and the tensionners are working in the Correct way and the chain will not Jump. i know you will Understand what i mean, Because you are a Smart Man, and i like your Comments.
If I’m just pulling the heads off can I bring the engine to TDC and put in the cam locks and the crank lock bolt before removing the cam pulleys? Is this the correct way
Thanks for the Nice Comment, i am from Australia , Thanks For Watching, & Have a Nice Day. You Can Watch part 1 of this Video its about how to remove timing chain for Audi Q7 V6 Supercharged Engine, its very important to watch before start working on engine like this one.
I did this job on my 3.0 last month. I dropped the transmission and did it with the engine still on. I had the workshop manual which helped a lot but not as much as your video. Sir, you are a true master. Thank you so much!!!
Thanks for the nice comment 👍
simple explanation, clear, and to the point, thank you for this!
Glad it was helpful!
SO CLEAR AND SIMPLE EXPLANATION
Thanks for that! 👍 ❤️ Thanks for watching and thanks for your comment.
Great video, so You have a step by step for audi q7 2013 engine timing chain procedure. Thank You!
You are very welcome to watch my mechanic videos on my CZcams channel.
Good job man (ما شاء الله) I live in Canada and drive a 2019 Q7 🇨🇦👌 nice work.
So cool! ما شاء الله جميل جدا .
شكرا
Brother u help me a lot thank you so much ! Inshallah tomorrow I can do the job well and correctly thank you
Best of Luck inshaa Allah. Always Remember Safety First
That compression test trick was awesome. Thank you
Glad you liked it!
Great job brother. What are the special tools used for timing?
Engine timing Tool
Hola, de casualidad me podrían facilitar los torques de culata de ese motor. Gracias
You make it look so easy
Thanks for Watching , have a Nice Day.
What did you use to check compression
MashAllah very nice brother! Good job. Keep up the good work.
Thanks for watching.
Very clear simple video
Glad you think so!
Great work sir 👍👍👍👌
So nice of you, Thanks For Watching.
Brother you amazing 🙏
Thanks for the nice comment 👍
Nice video brother Thankyou,
You are Very Welcome. You Can Watch My Videos on My Channel Any Time, Thanks For Watching. Have a Nice Weekend.
من اي بلد عمي ماشاء الله عليك
Hi Hachem, masyaAllah, tabarakallah.
Thanks for watching and thanks for your nice comment 👍❤️
Thank you so much brother you help me alot🙏
But my question is what can i use to lock camshaft and crankshaft position if i don't have timing tool set?
Thanks for watching.
impressed thank you
Glad you liked it!
Thanks very much!
You're welcome to Watch My Videos on My Channel, Enjoy & Learn and Have a Nice Day.
what if the cams bar code doesnt face up when i have the timing tool on
Watch the video again. 🤔
Can you replace a head gasket without removing the motor on a 2017 Audi Q7 ?
not sure. 🤔
What did you use to plug the holes for the compression test?
I did use a Plastic cup that's came with a new water pump connected with cable to the engine for safety, and safety glasses must be used , this is my way to test engine compression.
This engine timing chain is located at the back so you have to turn the harmonic balancer clockwise to check for timing marks is correct???? Well explained bro keep it up 👍👍👍
Hello Mr. Hanish, it is exactly how i did explain it in this video, when turning the engine from front at the fun's drive belt is located, turning to the right in the same time if looking to the back of the engine timing will be turning to the left and all chain tensionners are located to work with this engine to turn to the left because timing chain are located at the back of the engine, so when working on this engine to set the timing chain at the back of the engine you can not turn it to the Right from the Flywheel !!! put if you are turning the engine from the front of the engine at the harmonic balancer , you can turn the engine to the Right Because the timing chain at the back of the engine will be turning to the left and the tensionners are working in the Correct way and the chain will not Jump. i know you will Understand what i mean, Because you are a Smart Man, and i like your Comments.
@@HachemDoesEveryThing thank you Mr hachem you are the best mechanic 👌👍❤️
What would have if you accidentally turn the crankshaft counterclockwise?
If turning the engine to the wrong direction, engine timing may jump to wrong position
We are going to learn a lot from you.
Thanks For Your Super Nice Comment.
Good boss 👍
Many many thanks.
Thanks for watching and thanks for your nice comment 👍❤️
Wish you were in New York 👍🏽
Thanks for Watching.
Hello Hachem, is the timming mark same as 4.2 fsi
How much would this job cost on a 2012 A6 c7 3.0T?
Not sure.
Thanks for watching and thanks for your nice comment 👍❤️
What timing kit you using?
If I’m just pulling the heads off can I bring the engine to TDC and put in the cam locks and the crank lock bolt before removing the cam pulleys? Is this the correct way
Watch the videos again part: 1 and 2
Are those parts u used original or after market
Thanks for watching.
I like uncle 💖💖
Thanks for watching.
Thanks you mr
Thanks boss.
You are Very welcome, i am Very Happy That You Do visit My Channel To Watch My Videos and Enjoy Watching.
This makes it seem alot less intimidating. Getting into this it felt like i was taking apart a swiss watch
Is piston 1 at TDC ?
Watch the video again. 🤔
what year is this audi q7?
not sure. 🤔
Love you bro where are you from
Thanks for the Nice Comment, i am from Australia , Thanks For Watching, & Have a Nice Day. You Can Watch part 1 of this Video its about how to remove timing chain for Audi Q7 V6 Supercharged Engine,
its very important to watch before start working on engine like this one.
I am a automobile mechanic
Good luck
I need job
Good luck
What tool set would you use for this?
Nice Video brother
Watch the video again. 🤔