Powerful 1000W 12V 48V 72V Sine INVERTER
Vložit
- čas přidán 5. 09. 2024
- 0$ PCB + 0$ Shipping fee
www.nextpcb.co...
Register and get $100 from NextPCB:
www.nextpcb.co...
PCB Assembly capabilities info:
www.nextpcb.co...
👉 Shopee của mình:
Hello, Today I will share with you a new project. It is 10KW inverter using 28 mosfet. It can work at 12V to 72V. Power at 12v is 2000W, Maximum power at 72V is 10000W, Of course that's the power of the board, You will need a large enough transformer. Need a 20Kg transformer for 10000W / 72V. If using 12V, I recommend mosfet IRF1404, 48V is IRFB4110, 72V IRFB4115
You can download the project here: bit.ly/3mhirBj
If you like my video, give me a cup coffee. Thank you very much.
Donate : www.paypal.com...
Facebook group : bit.ly/Creative...
Contact: Magnetron0989821611@gmail.com
Phone: 0989821611
#Inverter
#10KW
#12Vto220V
Hello. I signed up for your page just to support you. I will tell you why. 1000w. you made a device, 1000 w. you wrote. Some people lie to get attention. You are an honest person.
7:17 helikopter ahahaha 🤣🤣🤣
Wow. Nice and wonderful inverter project. If the load current is actually taken 132amps from the 12v DC source, it means this inverter can carry up to 10000watts load if it's DC source is 72v. Thanks once again.
that is super!!!!! great video sir, hope i can make one for my self one day, and it's the first time i laugh very hard in your videos when i saw that helicopter thing that you did, hahahahahahahha, and thanks for sharing, and always be safe, god bless sir, love all of your work, thanks again for sharing.
7:16 hài vcc 🤣🤣🤣🤣
😄
Excellent project 👍
Hi, nice video. i did the same circuit twice, but i end up having a voltage drop of 7vac (213v instead of 220 with no load) with only 100W load. Any idea why ?
I have designed this inverter for 24 volts , but i get tester phase light on for both neutral and phase wires of transformer,
The voltage also drops to 175 volts from 240 volts on applying 6 amps load.
My batteries are good, transformer is 2500 watt what should I do,please guide
I just built this design too and I am facing same problem. Please, Have you found a solution?
Bác này giỏi quá
Super presentation 👍
I love 7:21🤣
😁😂
Happy New Year 2022
Very nice 🌹 dear
Please make 24v 50a powerful mppt
ok bro.
Sir File shows fail not upload
Helicopter helicopter 🤣🤣
Awesome video
Не честно. С таким трансформатором - и из П-образных импульсов синус будет)) А еще было бы очень интересно коэффициент мощности этой штуки глянуть.
Thanks very much sir for this wonderful projects
File is not showing in jlcpcb tell please if you support in this file outline not added would you like to correct file upload you forget or making fool for youtube viewer
Hello Awsome Tech, how can i find the PH002 - TLP250? pls i need this for the proyect
Can you say about transformer details?
Always doing great work
Good job
Super...thank you... 100% Best.
Why did you use 4 pieces of TLP2150 instead of using two IR2110?
good job
I was wondering why the screen printing and lack of component names?
Top show manda uma placa dessa pra mim kkk.
kindly explain how you calculate the number of mosfet used per channel
thanks
Use battery power DC 72v. AC transformer 220v. How many volts will be used on the AC transformer per circuit?
trafo 42V to 220V
200 arc inverter welding machine working on this inverter?
Are you sure your overload section is working properly?
How to used full wave transformer in this circuit, pls explain in new video. Excellent video series .Thanks son
Exelente proyecto sir
Can i use EGS-002 module?
DC 12V 130...150A ... 60V 20...50A 🤯
Is it possible to make this work with us to convert from 220v to 12v instead of raising from 12v to 220v?
in 6:25 what was PH002 - TLP250
Nice project, The PCB is very attractive . Please, What is Rx(resistor) value if inverter is to be used at 12v,24v,36v,48v? thanks
Vẫn hóng anh dùng egs đen😅
là cái nào ta?
@@PhdHung cái mạch egs004 mà nó to bằng lòng bàn tay ý ạ anh.
amigo parabéns pelo projeto, e obrigado por disponibilizar ele de graça conosco, algo meio que raro de se ver nos dias atuais. Queria saber se vc teria a lista de componentes, e se poderia disponibilizar. Vi no vídeo que na placa tinha tipo um pequeno núcleo para medir a corrente, e não sei qual a referência. Você poderia nos ajudar ? Novamente obrigado.
friend congratulations for the project, and thank you for making it available for free with us, something kind of rare to see these days. I wanted to know if you would have the list of components, and if you could make it available. I saw on the video that the board had a small core to measure the current, and I don't know what the reference is. Can you help us ? Thank you again.
Boa tarde ... Voce conseguiu abrir os arquivos depois de descompactado ? se sim, qual programa ?
sim amigo, mas ñ tem programas, só arquivos
@@ranulfo102 sim ... Mas digo em qual programa essas extensões de arquivos são compatíveis ?
EAGLE E ADOBE
@@alexdorigo5137 eagle
Hi my dear instructor,
I am subscriber of your channel,
under this project you use a CT sensor for overload current protection , may I know, the thick wire that passes through the sensor in and out like a shunt resistance, how is it connect into the circuit , IN and OUT.? Please kindly help me out. Thanks.
That is great,keep it up!
Which approach will you suggest for me for my self-built inverter? I built a number of sg3525 based inverter without much problem. But voltage drop is what I could not overcome,even though I followed most recommended designs for the feedback circuit using 12v transformer and the pin 1 of sg3525. It never worked still.
Please advice on what could the problem be and how to get a stable output voltage.
czcams.com/video/BxEwAEQg134/video.html
Cục này k tải ăn dòng bao nhiêu Ampe a
hi @Zirconium i can use six EE70 transformer in parallèle, i dont have a large enough transformer
Cuanto cuesta hacer una placa asi colega?
Belo projeto, o PCB é muito atraente. Por favor, qual é o valor Rx (resistor) se o inversor for usado em 12v,24v,36v,48v? obrigado
hello this one have error? i prepared parts and pcb to make this one. sad..
May i know how to fix error?
Helicopter helicopter...... 😆😆😆
After building this project I test run and encounter an issues. The egs002 blink twice which means over current . Now how do I should've this issue since the do not have current settings. Please help
Hi, I`m watching your videos as soon as they`re posted. How would this build need to be modified for split phase 110v/50hz for combined 10kw?
Queria saber si pueden facilitarme el esquema o montaje de un inversor bifasico con 2AC de salida desfasadas a 90º
Sao chưa thấy bán hàng trên shopee vậy
do you sell the pcb's? This is a terrific project....
Can i use TO-247 mosfet with this pcb?
Hello Awesome Tech, your tech is indeed awesome. I've been following your videos and they're amazing. I give kudos to you.
In this inverter design, it seems the current sensing for overload disconnect is done by the donut current sensor on your board (the blue component) right?
Also, please help me to add the bottom layer, top layer and top silk layer of this pcb board in PDF format to the project rar file.
Because of those who want to fabricate their diy pcb at home. THANKS BRO.
Need a circuit diagram
In which CAD software you made this project?
? induction was 600w mode but inverter consumming 132A = 1580w.. what happend?
Please I try to get the circuit diagram on this project in vain, I couldn't get it from the download. So if you could help me
Brillant the best
Sáo a nghi ban bo mạch o shopee roi ?
Excellent job, how reliable is nextpcb
Can you make Fully automatic inverter 500watt or 800watt...
please make a 3 Phase 11kw version, for charging an EV
Hello sir pleas how much value ofr-x resestor .?
Dove posso comprare tutto il materiale che serve a realizzare il tuo progetto
Good👍
Este men llevo mas de un mes pidiendole un inversor con el sg3524
Sir Please Mujhe Ek Inverter Chahiye Jo 48V DC Ko 220V AC Men Convert Kare. Please Help Me. 🙏
Very Urgently Needed. Jaldi Se Mujhe Buy Karna Hai... Light Ki Problem Hai Mere Area Men. 😞
Please let me inform CT power Please.
I have an idea, can you make a 5G mobile phone signal booster? Cheers ☺️
Hello good technician, where can I get the electronic board for the inverter?
Thank you so much for your sharing and hard work. Is there a voltage dip when the engine is starting?.
We see the current drawn as a maximum of 1000 Watts. The 10000 watts you are talking about. Can you test it on bigger load?
Many greetings from Turkey.
Read the video description.
Merhaba, Bugün sizlerle yeni bir proje paylaşacağım. 28 mosfet kullanan 10KW invertördür. 12V ile 72V arasında çalışabilir. 12v'deki güç 2000W'dır, 72V'deki maksimum güç 10000W'dir, Tabii ki kartın gücü bu, Yeterince büyük bir transformatöre ihtiyacınız olacak. 10000W / 72V için 20Kg'lık bir transformatöre ihtiyacınız var. 12V kullanıyorsanız mosfet IRF1404 öneririm, 48V IRFB4110, 72V IRFB4115 projeyi buradan indirebilirsiniz
the output of this demonstration appears to be limited by the size of the output transformer. Bigger transformer, larger output. The board seems to be designed and populated to 10kWatts.
How do I get pcb you're using on video for 120ac output 12-24v input?
will this work with egs002?
Bao giờ mở bán shopee thế anh, thấy báo tạm nghỉ r
Lát nữa bạn, dạo này đang lười bán hehe
Please under this your project, if you go on the platform from where you download, after downloading, you don't see any circuit diagram.
Please our instructor and teacher, kindly help us, we are only studying to become perfect.
use eagle9.6
Dòng không tải mất bao nhiêu A vậy bạn?
khoảng 1.2A nhé
Plz digram show kren with all components
FAKE....10kw in thumb, 1kw in rl......
bác cho em hỏi con trở gần chỗ v-out kia là bao nhiêu vậy ạ. chỗ đó không có ký hiệu mong bác trả lời em ạ. em cảm ơn
Mạch này có lỗi nên mình nghỉ làm lâu r b
bác cứ chỉ cho rm biết là được em tự nghiên cứu. chứ bỏ đi 10 cái pcb thì phí quá ạ em cảm ơn
cứ đam mê rồi lấy pcb về mất khối nhiều công sức và tiền lên phải làm được chứ bỏ đi ạ
Is it 10kw or 1kw? Because the title says 1kw but the thumbnail says 10kw
100W
How to make the output 120v / 60Hz
hello i would like to know if you can provide me with the bom and e pcl files
i am in usa if i can help in any way let me know i enjoy your videos
my friend is the ee for genetry solar they have a 6k low freq
and soon will have a 12k low freq they are awesome strong inverters
they are loaded with every thing check out the GS inverters if you ever have time
let me know what you think if you do find the time
circuit diagram plz
Sirr pleas answer me
I want r-x resestor value...?!pleas hellp
Please make a 220 volt to 6volt battery charger
Can i use egs002 module
Request sir: there is this inverter that you said you have. Stm8s003f3p6 sinewave inverter with charger and with lcd screen, please kindly do it. High request sir. Thanks in anticipation.
,Magandang Araw, interisado sana akong mag order ng mga gawa mo na products sa shopee kaso from Philippines pa ako hindi pala maka order, sayang naman, so sad😢
Amazing 🤩 😻
Yes👍🔋
Thấy sẵn hàng bo giao động r
hehe, mấy chục bo
I'll like to know what mean 10.000 Watts in the title if the device output Is 132 Ampere at 12 Volt, so only 1584 Watts.... 🧐
132Ax72V
@@PhdHung Yes, 132x72 = 9500 Watts, anyway transformer and heater radiator are under dimensioned, as Is Is can't reach 10KW.
But full day 132Amp use battery not affordable maximum load 1 day use and dry/ dead chances
1000w car inverter modify fish shocker
nice
Đẹp
please make the project read server power supply data using arduino
if u want sale.. how much price bro?
7USD/1PCB
@@PhdHung I mean ready to install components do not include transformers..
@@PhdHung hệ 12v (r-x) là bao nhiêu k vậy bạn?
Where to buy in india
Test the inverter, with solar pannel.
Are multă pierdere de curent cu transformatorul,plus ca e pe 12v
@@cipry1010 Dar atunci să fie conectat la 48v.
@@cipry1010 Asta poate fi și din cauza tensiunii pierdute.