How to Replace Valve Cover Gasket 2003-2008 Toyota Corolla
Vložit
- čas přidán 24. 04. 2023
- Buy Now!
New Valve Cover Gasket from 1AAuto.com 1aau.to/ia/TYEGS00006
This video shows you how to install a valve cover gasket on your 2003-2008 Toyota Corolla. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket will make sure the oil stays inside the engine where it belongs!
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Socket 1aau.to/oa32/1AXAA00017
• 12mm Socket 1aau.to/obmE/1AXAA00015
• Ratchet 1aau.to/obvb/1AXAA00016
• Torque Wrench 1aau.to/oayS/1AXAA00044
• Brake Parts Cleaner
• Gloves 1aau.to/oUv/1AXSS00048
• RTV
• Safety Glasses 1aau.to/oMK/1AXAA00343
• Rubber Mallet 1aau.to/ogp/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video…well done. One tip from a veteran jet mechanic. Torque specs are from the center of the torque wrench handle and not the end. You’ll get a more accurate torque to spec by gripping the wrench like you grip a screwdriver. Never from the end of the torque wrench. 👍
+Charles G Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
I used this video to replace the gasket on my Corolla E120. For someone who never done this it went smooth. Thank you
Nice job! This is so thorough and I like how you detailed all the steps, especially the important ones like rtv placement, not to use too much, and silicon at bottom of ignition coil at spark plug interface.
I appreciate the time and attention you devoted to this video!
Great vid. One thing though. The two metal/ rubber washers go on the two middle bolts of the cover. Just incase someone needed to know.
DO NOT LOSE THE FUCKING BOLTS GUYS. MAKE A CARDBOARD CUT OUT DIAGRAM AND THEN TAKE A DAMN PICTURE JUST TRUST ME.
Superb video. Of course, the linked 1AAuto is selling the gasket at $15 higher than MSRP for a FACTORY Toyota gasket, TWICE the street price of a FACTORY Toyota gasket, and 4X the price of an aftermarket gasket. Kinda, sorta, discredits the whole, "√ Save Money" schtick in the pinned comment, doesn't it?
Fantastic video - thanks so much!
Good detailed information regarding tool measurements and torque settings.
Outstanding video! Thank you so much for sharing.
Super tutorial. Congrats & 1000xthanks!
Great video tutorial. Covers every point really well. my corolla had some suttle differences in regards to clips but this was 99% accurate for my model. Only thing of caution is be very careful with an old gasket as they are brittle. I recommend this video to any d.i.yer.
Thanks for the video, i just discovered oil mixture in my radiator coolant, what could be the course?
Nicely done TRQ! Thanks!!!
Thank you very much. Good job 👍
Thumbs up! Thanks for the video!
What happened to the spark plugs? Did they need to be taken out and replaced with new ones or you can still use them? Thanks
Great video! The only thing missing was the removal of the spark plugs.
do you have to drain the oil before doing this job?
Do you have to let the RTV cure before driving?
Thank you sir ! 😀
Do you guys have any video from valve cover for Toyota tundra 2013
Great video, what is the RTV?
When I put the new gasket on, it just flops around and it didn't seal properly last time when I went to put it back. Now I have to open it up again and probably buy a new gasket?
How much torque? Can’t find a straight answer on torque specs. 2008 corolla 1zz
Great
Do you have a video on how to take the front driver door panel off to get to window and adjust the window that is a rail on a Camry 1999
+Roberto Rios We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
Thanks
+@neftalilomeli847 Thanks for watching our video! 1aau.to/m/Shop-TRQ
What if I don’t have a torque wrench?
But where do you find a 10mm socket?
+Brian Blackburn You should be able to find one at any local auto parts store.
You say, Out 8 foot pound, In 6 foot pound, Is correct.
Let me know please
jessica just admitted she lied yesterday. what else is new?
Cleaning with parts cleaner was unnecessary
What a terrible design for this engine cover! One of the nuts is attached to a stud that doubles as one of the valve cover bolts. So as I removed that nut for the engine cover, it removed the bolt below it. There's no telling how many times that's been done by me and others.
Thanks man :) Very well explained video. Me and my brother have a project and will follow along. Liked, shared, and subbed
You are my youtube mechanic lol I'll let you know if there is a request video on another issue with a 06 Toyota Corolla
+Chris Ramirez Thanks for watching our video! 1aau.to/m/Shop-TRQ