How to install the Kaizen Adapters from Gympin on the Rogue 2.0 trolley arms
Vložit
- čas přidán 26. 07. 2024
- You can order the adapters here: gym-pin.co.uk/product/kaizen-...
Coupon code KAIZEN10 saves 10% on your entire order.
⏬ Equipment I use in my gym ⏬
REP Omni 6 post power rack - repfitness.com/products/omni-...
REP AB4100 - repfitness.com/products/ab-41...
REP 5-50 hex dumbbell set - repfitness.com/collections/du...
Fringe Sport Savage bumper plate set - shrsl.com/3iaj3
Fringe Sport floor mounted power cage - shrsl.com/3iaj9
Bells of Steel Mighty Grip plates - bellsofsteel.postaffiliatepro...
Titan Fitness short wall mounted pulley tower - titan-fitness.pxf.io/P0dk3e
Titan Fitness rackable trap bar - titan-fitness.pxf.io/VyDVrO
Bells of Steel arch nemesis multi-grip camber bar - bellsofsteel.postaffiliatepro...
Bells of Steel blue cerakote utility bar - bellsofsteel.postaffiliatepro...
Bells of Steel SS3 safety squat bar - bellsofsteel.postaffiliatepro...
Abmat Preacher Pad - abmat.com/#a_aid=kaizendiygym
Abmat Hip Thrust Pad - abmat.com/#a_aid=kaizendiygym
⏬ Consider supporting Kaizen DIY Gym by purchasing from any of the following links ⏬
Rogue Fitness (www.kaizendiygym.com/links)
REP Fitness (repfitness.com/#61e7125884bf7)
Fringe Sport (shareasale.com/r.cfm?b=720665...)
Titan Fitness (titan-fitness.pxf.io/a1G6qM)
AbMat (abmat.com/#a_aid=kaizendiygym)
Bells of Steel (bellsofsteel.postaffiliatepro...)
Wall Control (www.wallcontrol.com?aff=140)
Plate Snacks (platesnacks.com?aff=36)
Bowflex (www.bowflex.com/default?irgwc...)
Nautilus & Schwinn (www.nautilus.com/default?adID...)
Amazon (www.amazon.com?&_encoding=UTF8&tag=7143506281-20&linkCode=ur2&linkId=41ca63fd5d4261a73bb1d9731360bb50&camp=1789&creative=9325)
Home Depot (homedepot.sjv.io/OR4R0A)
International Tool (www.internationaltool.com/sho...)
Woodcraft (www.woodcraft.com/?cjevent=f9...)
Ace Hardware (www.acehardware.com/?irclicki...)
Acme Tools (www.acmetools.com/?irclickid=...)
The Tool Nut (www.toolnut.com/?irclickid=3g...)
This video is not sponsored. Some of the links are affiliates which means if you purchase through the link, I’ll receive a small commission.
#kaizendiygym #diygymequipment #diyhomegym
0:00 Intro
0:16 Mount the trolleys onto your rack
0:24 Remove the arm
0:32 Insert the adapter
0:40 Insert the arm
0:56 Move the bumpers
1:32 Benefits of the front facing keyhole - Sport
✅ Rogue 1.0, Rep, and Titan X3 adapters will be available to order this month.
✅ Titan T3, Fray, and Bells of Steel will be available in January.
✅ Compatibility with Vendetta will be confirmed as soon as we have compatible versions to test together.
A big thanks to everyone who has already placed an order. For everyone who is still considering, remember to use coupon code KAIZEN10 at checkout to get 10% off the order.
Stop trying to get me to use my jammers!!!
We’ll have to see if GymPin can make a pair in white, then you’ll definitely use them!
Would be cool to see a vid where you show off your favorite movements, like a demo vid.
I agree, that’s a great idea for a follow up video!
First 3 views! I love the work man I've made a few things u did and love it. Keep it up broski
Awesome, I love to hear it! Thank you for the support.
Love your content 👍
Thank you so much!
Duuuuude!!! I didnt know you were on youtube!!!!!
I am finally putting my film degree to use!
I have the REP PR-4000 with Ares cable attachment. Your adapter, plus the Vendetta adapters just turned me from "meh" to "must have" on the ISO Arms. Can't wait till you release the REP version; it'll be a day 1 pre-order for me!!!
Awesome, I appreciate the support. The Rep version should be ready soon!
Same exact feeling love them
CONGRADS !!!!!!
Thanks dude! I am pretty excited
I got mine added to my vendetta arm attachments. I had to wait a while for the vendetta attachment. But they are awesome together.
That’s great to hear!
I had purchases the gym pin version of titan that has the hitch pin. I know coop from garage gym mentioned that the key version might fall out. As a result I went with this version and very happy I did. The gym pin is solid. Perfect with the vendetta arm attachments and essential for any on with lever arms. It does bring along the experience of a commercial gym to your home. Thank you ❤
Can't wait for the X3 adapters
We are working quickly to have those ready by the end of the month.
I think Signature fitness stole your idea.
I’ve had mine on pre-order from Gym-Pin since day 1😊👍 Can’t wait!!!
One thing - I have Monster Lite 2.0 and I don’t think the spacing on the bumper block bolts will allow me to move them 90 degrees. I’m guessing it works with the Monster arms because of the keyhole slot giving enough‘ wiggle room’.
I would love to connect and get your thoughts on the fit and everything after you receive them and test them out. Let me know your preferred method of communication.
Hi Kyle. Thanks for replying! Love what you do 👍
Very happy to give feedback and thoughts, once I’ve put them through their paces! Just heard from GymPin, they’re supposed to be arriving tomorrow! 😃
I’ve been talking to Britton, at Vendetta as well, with the hope that I’ll be able to get a set of his adapters as well, once he has a Monster Lite compatible design, for the ultimate combo IMO. I know you’re in touch with him too so that everything will work together.
can you tell me if it worked for you when you received them? I had this same question and my adapter arrives next week. I'm curious if you were able to unscrew it and use a 5/8 screw in the smaller hole and tighten it that way. Let me know how you made yours work, Thanks!
I like this
Thank you so much! I am extremely proud of this product
Any plans to make some that will work with Titan series lever arms (or maybe can verify that one of the sets for rogue will also work with titan series)? Would love to get these along with the vendetta brackets for my existing titan series arms.
We're currently prototyping the X3 adapters and are planning on doing pre-orders by the end of January
@@KaizenDIYGym I’m guessing the X3 and titan series are the same other than the bracket that they attached to the rack with? Haven’t looked much but knowing titan I’m wouldn’t be surprised. Assuming that’s the case you guys should probably list it as such so people know they work on multiple titan lever arms. Thanks and looking forward to the pre order opening up!
Can you build the hack squat attachment from David Evans?
I’m not familiar with that one. I’ll check it out and add it to my list
Are the REP fitness Kaizen adapters compatible with Vendetta strength mod?
Also, didn't seen the Rep adapter on the website, any update on when they will be available?
We are working with Vendetta to make sure they’re compatible. We haven’t been able to test out the Rep versions together yet. Our Rep adapters are still being prototyped (we’re working through some design challenges) and we’re hoping they’ll be ready for preorder within the next 4-6 weeks.
@@KaizenDIYGym Will you release a video showing off the rep version before you launch?
How will this work with the upgraded rogue handles ?
Unfortunately, Rogue didn't design the arms with my adapters in mind, so the articulating handles are not really usable in the same way.
Hey mine is on the way! Quick question is the install the same for the Titan series version
It should be very similar. I don’t have Titan arms so I haven’t actually done the install myself. Feel free to reach out if you have any issues.
How can one reattach the bumpers on the REP iso arms. I have the Vendetta’s and the Athena
Contact GymPin directly at hello@gym-pin.co.uk
hey, what is the weight load limit on these? I have the vendetta strength trolleys and i like to lock them parallel and throw a bench pad over them to do seal rows. wondering what the impact is on the pivot/hinge point when locking them out in a trolley like that.
So far they have held up great under the weight limit recommendations of the Vendetta attachments.
I did a static test putting 500 pounds on a single arm for 24 hours and didn’t see any bending or cracking.
That’s about as scientific as it gets.
@@KaizenDIYGym cool, yeah that sounds pretty good. thanks professor Kaizen!
Dude, I am so happy for you. You have come so far, and you are a genuinely Good Dude! God Bless. @roguefitness
Thank you so much! I really appreciate the kind words and support.
Any plans for Titan T-3 units?
They’re in the works. Should be available in the next month or two
Does this fit with the Irwin Fitness Supply Jammer arms?
All of the manufacturers have different measurements and hole spacing. If you can provide accurate measurements to GymPin, they can let you know if they’re compatible. Hello@gym-pin.co.uk
I don't know why you didn't add a box section on the adapter so that yo could keep the arms in the intended position without having to rotate the arm 90 degrees? I have the articulated handles and would prefer to have that option retained
I was thinking along the same lines. I want to get these but it seems as if we lose a lot of the mobility of the articulated handles as the bottom holes are smaller to accommodate the bumper.
Any updates from vendetta regarding compatibility for rogue 2.0?
I am waiting for Vendetta to send me an adapter to test out.
@@KaizenDIYGym The Vendetta's just arrived for the Rogue 2.0, happy to give feedback.
Will the 1.0 adapters for monster lite rack work for bells of steel sliding lever arms?
No. We are working on a version specifically for the Bells arms.
@@KaizenDIYGym Have they been fitted on the BOS sliding lever arms? Do you know of anyone who has tried using them on BOS? Both are a true 3*3 post, I’m not sure why they wouldn’t fit on BOS.
Will this fit bells of steen hydra
We need to make a version for each manufacturer. These in the video only fit Rogue. We are working on a version for BOS hydra
On the monster lite version has anyone found a way to move the bumpers?
Reach out to GymPin directly. I’m pretty sure they know how to do it. Hello@gym-pin.co.uk
Will the 1.0 version of these work with the Vedetta?
I am waiting for a set of Vendetta adapters to test out to confirm, but we've been sharing measurements and everything should work together.
Thanks for the reply. just read ur previous comments above. Might pick up a pair if they are compatible !
Do they fit on ATX jammer arms ? (german brand)
We will need dimensions for ATX to confirm. We may need to make a version specifically for ATX.
Will this handle the load when using the Sorinex J-squat?
We haven’t released the Sorinex version yet but it is in the works!
@@KaizenDIYGym meant is it ok to use the adapter along with the Sorinex J-squat attachment. It's mounted on the Rogue Trolley 2.0
What size sockets do I need to remove the bumpers?
Sorry to take so long to respond. I have a socket set that contains both metric and imperial sockets. I used 3/4" on one side and 19mm on the other side.
I figured it oot. Thank you for responding.@@KaizenDIYGym
Which version of these will work with STRAYDOG Goat?
Unfortunately, no version. Stray dog declined to work with me. They said it wasn’t in their financial interests.
Well that just sucks.
Available for Rep fitness?
Yes, the Rep version will be available in January