How to use electric bike ⚡️ menu KT-LCD7 | As found on EBFEC e-bikes ⚡️🚲

Sdílet
Vložit
  • čas přidán 25. 02. 2022
  • For UK/European markets.
    Electric bikes from the EBFEC range are fitted with the KT-LCD7 display. The instructions that are supplied are generic covering all markets, not all settings in the manual are available (i.e. there is no throttle for European bikes).
    This video goes through the operational settings as well as how to reset the ride statistics, how to change the display units from km/h to mph and how to change the max assist speed from the default 25km/h.
    To reset: turn on, wait 5 seconds, press Up and Down buttons until units flash, press Menu button to reset
    To access Settings: turn on, press Up and Down buttons until units flash. You can now change max assist speed, wheel size, and km/h to mph.
    Comment for estarli bike:
    Horizon Micromobility i found out how to do this on a estarli bike. For anyone else who is trying this follow this guide : Power on your bike Immediately hold down the "up" & "down" arrows until the screen backlight turns on. Release all buttons and then press the following buttons in this order to enter the setup menu "Power" - "up" - "down" Followed by "Up" - "power" - "down" this will enter the setup menu to adjust max speed
    Music from Uppbeat (free for Creators!):
    uppbeat.io/t/paul-yudin/at-th...
    License code: 00HEKEIIYASHHCKG
  • Auta a dopravní prostředky

Komentáře • 27

  • @elementary8963
    @elementary8963 Před 2 lety +1

    Great video - thanks. Does the cruise control work on your UK/EU display?

    • @elementary8963
      @elementary8963 Před 2 lety +1

      After the cruise function is turned on, the trip riding speed is greater
      than 7 KM/ H, hold "DOWN" button long and enter cruise, the CRUISE lit. Brake
      or hold any button to cancel.

  • @user-tx1yl9xw3l
    @user-tx1yl9xw3l Před měsícem

    How do you change the time?

  • @jordanreale
    @jordanreale Před rokem +2

    P1 P2 P3 4 5 please

  • @craigjones123
    @craigjones123 Před 2 lety +1

    I am trying to access the settings menu on the unit but it does not seem to be doing anything, is there something I am doing wrong ?

    • @HorizonMicromobility
      @HorizonMicromobility  Před 2 lety +1

      You need to turn it on and then press the buttons within 5 seconds - you then need to keep fingers pressed for around 20-25 seconds.

    • @craigjones123
      @craigjones123 Před 2 lety +1

      Thanks for the quick reply. I have done exactly that but it doesn’t work. A little frustrated right now.

    • @HorizonMicromobility
      @HorizonMicromobility  Před 2 lety +1

      @@craigjones123 What buttons are you pressing?

    • @craigjones123
      @craigjones123 Před 2 lety +1

      @@HorizonMicromobility turning the unit on and then immediately holding down plus and minus for over 30 seconds. i have and Estarli e20

    • @HorizonMicromobility
      @HorizonMicromobility  Před 2 lety +1

      @@craigjones123 Hmm try contacting Estarli - would have thought it would be the same for all bikes that have that controller!

  • @naranja314159265359
    @naranja314159265359 Před 2 lety +1

    Does anyone know how to de restrict an ebfec please?