PreSonus-Digital Patching (Soft Patching) on StudioLive Series III
Vložit
- čas přidán 10. 09. 2024
- Ray discusses Digital Patching (AKA Soft Patching) on the StudioLive Series III Mixers, which allows for some VERY clever routing.
Be sure to get the latest firmware update from your my.presonus.com account to access these features!
my.presonus.com
For more on StudioLive Series III Mixers, click here: www.presonus.c...
I want to congratulate you for listening to us, I have reported this request in the questions and suggestions of the forum, this resource will help us in many situations of multiple mixes; again thank you for giving us the assurance that we have chosen the best digital mixer within the price range that it is willing to compete, success here in Brazil and on the whole planet.
@9:38 Solo bus to monitor. Hear what your performer is hearing. So good!
I am using SL64S connected to a MacBook for UC surface and reaper for broadcast mix. The problem is that I get random recurring drop outs on FOH and clll mixes. What could going on here? Please help.
How do I send channel 3/4 to my main output (tape in)
I’m so confused
Great video totally makes perfect sense now
If I have a stereo aux mix on channels 17 & 18 which mix is that when selected from the top? Also in stereo one the numbers for the main out is something like 37 & 38… it makes it very hard to understand what is what
Quero parabenizá-los por nos ouvir, eu relatei este pedido nas perguntas e sugestões do fórum, esse recurso irá nos ajudar em muitas situações de múltiplas mixagens; novamente obrigado por nos dar a certeza de que escolhemos o melhor Mixer Digital dentro da faixa de preço a que ele se dispôs a competir, sucesso aqui no Brasil e em todo planeta.
Hi, silly question here: when you´re assigning your analog outputs related to your mixes I see that Mix 1 is assigned to Mix1 output, but I thought mixes were stereo, so is the physical output labeled as Mix 1 stereo too?
I'm thinking of buying a Stereolive Series III but I´ve got a lot of questions about it and I´m trying to figure them out. Thanks!
You have 16 mono mix outputs. But they can be stereo linked to give you 8 stereo mix outputs.
PreSonus should re-name the physical Mix outputs as Aux rather than Mix as this gets confusing, sending Mix 1 to Mix 1.
@@RecordingStudio9 I was confused as hell as well.. I wanna send my channel aux to my DAW, and not my mix.. thank you man..
Hi! I would like to route the main output + mix 1/2/3/4/5/6 outputs to my headphone output. Is this possible? I use the studiolive 16r.
hey is it possible to route an output to create a monitor wedge for a guest singer, who doesnt use IEMS to sing along to a track. like take the output maybe from XLR into a DI box and the DI box with a instrument jack into a speaker? then route the output to match the computer channel to let the singer hear it?
Thanks for the video Ray! Really helped a lot. :)
Can you "soft patch" POST fat channel? As in, if I want two compressors on a signal, can I send that signal to another channel POST effects from the first of the two channels?
Can you please explain how to setup my outboard gear to work with studiolive 32s and pipeline XT. Thank you for your time. George.
What if I want multiple inputs to go to the same channel to act as a drum buss to maybe compress the drums as a whole rather than just each individual instrument?
Will this work for PA management? Need crossover solution for 4 way stereo plus mono for subs. 9 outputs with individual crossover settings?
Pretty sure you could do that on any digital mixer, though it's a really inefficient use of the outputs when a cheap hardware crossover will split out to amps just fine, if you're only splitting the same signal. There's already a separate mono mix on this and most others, that you can EQ separately however you like, and feed a sub or front fills, and I use multiple mix outputs for delays all the time, and often one for a sub on an aux mix, so only instruments I want in the sub get sent to it. We also use this feature all the time to feed Q&A foldbacks, or a mix minus for something like a skype call where you wouldn't want to feed the skype's audio back into itself, but want it in the mains.
What if i don't wan't to send a channel to any of the AVB or USB channels ? Eg don't want to send out the intercom MIX to AVB by accident.
In UC the grid is to big, lot of scrolling ... sorry
Hi Ray! Hi Rick! Question, can outboard gear be connected to studiolive 32s, without using a DAW. If so please explain. Thanks.
Send Warren Haurt a 64s for review please. I would love to hear how he thinks it stacks up against his Audient console. I think you can win him over
If the band is using the earmix system, is the AVB the source for earmix for the band in the soft patching? If not what source is used for the earmix unit the for band?
Hi sir, I'm so grateful for this video. I just want to find out the difference between the (input source of input patch)
Thanks for the video Ray!
I have the following situation, in my church I want to receive the audio from the console via usb, to process it in the daw Studio One, since we transmit all the services live, but the last time we did it, it turns out that the boys (musicians) also get the audio with effects, and it is annoying to be listening in their in-ears the effects that are applied to the drums such as a compressor, the reverbs of the voices, and all those effects, in the transmission, everything is very good, but I need the analog signal to reach the boys as it enters the console. Is there a way to configure the Mix outputs in the Studio Live console in such a way that the signal that comes out of there is the analog?
Thanks a lot.
Great video and I have a question please.
I have the 32S model, which I have not used yet (I bought it fairly recently). I am rewiring my studio for a hybrid setup where on a mix down I would like to use, at times, some vintage outboard gear. (Like an Eventide H3000 and some vintage digital reverbs like Yamaha REV 7 and Lexicon PCM 42 Digital Delay).
Question: Is it best to send the the audio to the outboard gear using the Sub Outputs (like an aux send on an analog console) and return the FX stereo audio return signal via either the Aux inputs and/or a line input. There's only 2 stereo Aux inputs on the 32S, so I would prefer being able to use the line inputs (as returns) so if needed, I can return 3 or more stereo FX return signals into the mix down.
Thanks for any info you can share as I am used to using an analog console.
Phil
NYC Area
How do you route a signal to the FlexMix from a channel? I want to send 6 DISCRETE SOURCES out of FlexMix Outs 1 - 6 ONLY. Can anybody here tell me how to do that?
Hi! I love your tutorials. Question: Is it possible to route input line 1 on my mixer to record on input 5, with changing the cable? I have Studiolive 32s III
Digital patching on StudioLive doesn't work anything like I would want or expect. For example, the tiny selection of potential sources for the AES output made it useless to us.
I can promote this company any time.
is digital patching available on the 24R (rack) as well ?
I bought a new Studio live 32 but it does not have the SMAART tool tat older 24.4 console used to have to eliminate feedback..is there any other way it can be done or is it hidden? please make a video about it.
It’s even been discontinued on their website ! I don’t think I would really buy another product from them. We can’t even get the 32 channel stagebox that works with this mixer cos it’s also been discontinued.
@@harold12A Its a real shame .. I really liked that future on it ... it really made a difference :( I hope they include it on a future update :( :( :(
AVB don´t work in windows environment for multitrack recording
Are they all recalled with different scenes?
Curious about this myself. Patching presets would be nice.
Yes, they are saved/recalled with scenes and there is also a filter in case you don't want to recall them with a scene.
Would love to soft patch the monitor/phones outputs
Hey Ray,
We recently bought 10 Earmix 16 units. I was able to create a mix for one of those but haven’t been able to do separate mix for the other units. We have a Studiolive 3 mixer @ FOH and a Studiolive 32R stage box and a couple of the SW5E switches. The manual doesnt show how to work with muliple Earmixs and also nothing on youtube. Can you please make a tutorial on how to do separate mixes for each earmix?
Check this video out: czcams.com/video/RFCfNa6Jao8/video.html
would this digital patching be the way to connect aviom in ear system?
You're overthinking it, just mix a monitor bus and physically plug it to the in-ear instead of an amp for a wedge.
Big beard, my little pony shirt = this guy knows what he’s talking about.
Question?
I have a stereo input from a PC for welcome music etc.
that is in input 10 L & 11 R.
How do I link those together?
when is the revolutionary 44100khz feature is gonna work? still waiting since mid2017
Just wondering why is this so important to everyone and why is it "revolutionary"?48 is currently industry standard now, why go backwards?
Re-opening old sessions that may have been recorded 44.1.
We need a standalone update the recording sucks
Brasil leve presonus. Studio live série 3
Am I the only one that finds the audio on this is distracting, especially coming from a pro audio company?
Jack Koski I'm about to send mind back I can't get no audio my little scarlet solo interface is way better than this big piece of crap that cost me over 2 Gs
@@richmuziqmedia it was probably you and not the mixer,I've never had that problem with mines.
Yeah you're the only one
Stirring the pot again smiling.
I'm so sorry. Presonus is hard to use. Somebody has got to say so. They appear to have their own name for everything so you can't even look up how to accomplish simple things. Their system is not straight forward. It is option heavy, all at once, to the point of befuddlement.