427 Windsor Stroker Start Up
Vložit
- čas přidán 30. 03. 2012
- SBF Windsor 427cid
Engine Model - 427cid SPORTSMAN STREET SMALL-BLOCK FORD WINDSOR
Horsepower - 535+ HP
Torque - 600 Ft Lbs
Bore and Stroke - 4.030 x 4.170 Inches
Compression Ratio - 10:1
Fuel - Premium pump gas
Very Rough Lopey Idle
Fully Balanced and Blueprinted by TBR Machine
Ahh!!! The sound of a beautiful Blue Oval on song. It's like a choir of angels singing on high!!!
Sounds like a line a character in Mad Max would say. Dig it.
Memory Lane.. In 1984 I purchased my 1963 Ford Galaxie Notchback 427 factory 4sp. Rangoon Red .. I didn't always win at the start of a race, but I assure everyone, at around 2nd. gear I was neck & neck. By 4th. Gear I was 2 full car lengths ahead.. Btw, M/Rd Street slicks on factory gas.. F.E BLOCK FACTORY DETROIT LEAD SLED. Corvettes, Mustangs, Novas, Buicks Ecetra Ecetra.. My 63 kicked ass..
Wow, 600 Ft. Lbs of torque is really impressive for a naturally aspirated small block.
That is one sweet sounding engine! When it's in a car, the sound of both of those carbs snapping open will be hard to get enough of. Nicely done, Sir.
My my...GM and Slopar take a note: Ford will always be King
yes
King of what?
@@hankdagmar2167 🐴🐴🐴🐴🐴
There's a reason that Carroll Shelby grabbed a Ford engine for everything he built.
@@kennycampbelljr5896 Yeah he was paid to.
Straight from FordRacing with a 2 yr warranty, SWEET!😎
Man , that sounds pissed off. Sweet.
That thing sounds pissed off. Love it!
i love Ford motors !
that's right buddy listen to that motor no Chevrolet and no. Phenom Ford first on race day
yeah , on my fourth one. same block
Working on starting my first!! 331 to go into a Ford Ranger.... Love the sound of a Ford v8
Me too there so much easier to work on than Chevy or mopar and they sound way so much better
I could sit there and listen to this all day
That idle sounds awesome.Nice engine.Those strokes make a heck of a lot of torque.
I would love to see a competition between a Ford Coyote vs 427 Stroker
After all these years, I now see how simple it is to create an engine testing stand. I'm in the wrong business...lol
“is that a thing of beauty or what?”
love it!
Gauges jumping like they're afraid of it. Just like it should be.
Glue some wheels and tape a chair on it and youre good to go!
I love all hot rods, Ford, Chevy, Dodge, but seems that cammed up Ford racing engines sound great at idle. Had a big cammed 468ci in a '79 Chevy Short Wide and it idled rougher than a corn cob but didnt make that sweet sweet music like this on. Nice engine man
DAMN FORD SOUNDS SWEET , WISH I WAS 25 AGAIN!
Really good looking and healthy sounding motor! Would have loved one of these back in the day to drop into my 302 Mustang :)
It's pretty cool when you have a cool engine, it's even cooler when it's inside a vehicle.
The 427 one of the greatest racing motors of all time no junk Chevrolets will put Dodge at Bay
Mr skipper you got JT here okay so they boarded out to a 427 I don't mind that motor sounds great buddy and I get where you're coming from with the side Oiler if I win the lottery you can bet rest assured I'll be getting a Stang with the original in it by the way the best thing in the world is on CZcams called the black mamba nobody beat no one and I'm sure after you look at it they're going to say it's a showpiece doesn't matter the motor that's under that hood is the original 427 you have a great night Mister skipper maybe we'll talk again take care buddy
That is one awesome Engine right there. BAD ASS! I love it.
If this was a Ford Boss/dart/world products block that allows a 4.125-4.185 bore, then revving it to 7000 rpm's shouldn't be an issue. With a stock windsor block (Even the 71-73) I'd want a main stud girdle and a forged assembly. The big Windsor is not the weak sister the 289/302's are around the main webs. It's a good design.
Beautiful. Would love to have one of these in a Crown Vic.
The smack of engiens! mad work pall!
mannnn....that sound is what ears were meant for!!!
just a little 351w in my brand new Shelby Cobra replica thats gonna be on the road veeeerrry soon.
listen to that motor nobody beat built right nobody beat have a great night what a motor
What could be a cooler automotive experience than having an engine like this in a nice Cobra replica? One could look dismissively at Ferraris, Lambos and McLarens!
I think this would be too much motor for a shelby replica, imagine how insane that thing would be. It'll be extremely hard to get traction.
Actually I have a 427W in my cobra it’s perfect but it is on the edge!
@@wizerulz Which Cobra do you have?
427w and Gt40 kit.
music to my ears
Choppy rough sound is good for your health, just something calming about a healthy motor. Sounds like work or fun ready to go.
Who doesn't want to run errands with that under the hood .
I like that home made engine "test run stand" :-)
Great sounding ford motor
Wow that's a huge idle
I sleep this music every night
SOOOOOOOOOO S-E-X-Y!!! Want it for my '89 Fox Body LX Restore!!
I just love it love it love it you can tell she's an eater nobody beat that's one of the greatest Motors of all time nobody the blue oval first on race day fast on race day and last but certainly not least ferocious on race day no damn to bitten junk Chevrolet leave the Dodge guys for another day
Is that English?
what a thing of beauty
5:02 that rev growl!
same combo I'm building right now but with AFR 205 heads, and Howards solid roller hope it runs as good as this one!
The dual quads look fantastic.
Steve
Quad webers look the best of all !.
that engine sounds awesome
Its time to turn the idle down where it's supposed to be. Around 850-900 would probably be good and the oil pressure would still be over 45 PSI.
Simple engine build for any use that's what Ford is all about from the get go, that's what people don't know, simple
Pretty awesome build! I think it might need a dual cooling fan system though.
Sounds Great!! wish it was in my '65 Falcon 4dr. Wagon!!
Yessir its a thing of beauty and sounds nasty, love it
Replacing my V10 in my excursion with one of these.
beautiful mate , im going to build one for my 67 fastback.
Beautiful idel.
Sounds GREAT!!
GREEEEEEEEAT sound man!
Thanks for the great vid!
Yes it's a thing of beauty! And boy the sound - as you say gorgeous!!!
Great video of the BELL HOUSING
Yep I think this is what my son and I will put in our 63 Lincoln Continental project......
Bet your neighbors love you!
Gotta love em’!
That would look real nice sitting in a kit car Cobra or a kit car 67/68 Mustang. That is quite an engine for sure!
95 per cent of all Ford's are still on the road the other half made it home!!!!
thats gorgeous
Thing sounds GREAT!!
Sounds good man
freaking awesome!!!
hmmm...this might just be perfect for my little 1964 ford supervan. ahhh... a man can dream :)
Beautiful motor, my Love! ;-)
The sound of a huge stampede! I love it!
Should I put this in my van...would my neighbors feel safe? Would this cause idiots to think of how to steal my baby? Would the cops carry a picture of me in their wallets? So many things could go wrong, yet if I don't, my joy would be hindered. Something to ponder :)
@TimsSpeedShop
Awesome - and that's from a Corvair owner. Imagine putting this thing and yourself into a car, for a total weight of a little over a ton, and then turning corners downhjll with the tail out, for 2 hours plus - rather than driving straight as you can, for 8 seconds. It boggles the mind to know that's how people won Can Am races. As scarey & mighty as is this mill, I recall that McLaren settled on a 590 ci aluminum block, injected, with pipes like these, although shorter. Nasty really took on new meaning. Racing in that day was so outrageous, it should be subject to a cover-up
Awesome!
That would work in my 46 Ford very well. Make it "Quick" enough.
Sound hotter than my 4 cilinder car :P
That's Beautiful....
i need one of these for my '83 Lightning tribute trk. that's a '83 shortbed 351W, soon to be replaced with a roller 351W, with a '93 body, & No electronics!
Bet you have fun adjusting those carbs. Sounds healthy. Like to see a real 427 FE block being built with those
goodies. It may cost a little more,but it would be worth it. Thanks for posting..
Marion Lovett agreed
i need to put one of these in a 67 falcon sports coupe!!
yeah you should slip that in an envelope and drop it in the mail to me... and i will tell every one your a great man,, haha,,,,, nice...
no doubt if you're still reading this three years later no doubt Ford first on race day
It'd look good in my '66 Shelby!
Man that's awesome
like the heart of some great beast , beating in a jar!
Idomake I GOT A JAR OF DIRRT!!... oh wait, wrong video...
My engine of choice
Would be a nice replacment for my bone stock 351w in my 87 ford short bed 4x4 and would probably get the same 10 mpg
punch that windsor out to 412, easy 500hp
O_O!!! that is one hell of a beast and a beauty u wouldn't want screw with, just listen to that beautiful idle of that engine, ahhhh, i think i just jizzed myself, lol
Sounds great. Only complaint is a vacuum gauge on the stand would have been nice.
Love it... just... Love it
screw having a pet cat. Just let your 427 purrr instead
Ryan Robinson or just name ur cat 427
Jeffrey Bemma fuck that only thing I name a CAT is a Caterpillar diesel
PSD Mayhem Funny shit dude
The cat did the first burnout when it started. Probably hiding in the neighbors' doghouse.
Have both.
I can't believe this was 9 years ago!
Need this in my crown Vic
Damn that does sound good. How do you get the lopey idle? Could you build it without that idle?
JESUS PETE LOUISE!!! BADASS !!
I want a set of valve covers like that!!!
I would like to see a comparison between one of these and an FE Side Oiler both on the dyno and in otherwise identical Cobras.
Very, very nice
the run stand is badass as well!!!!!!!!! I am envious I need that here....LOL
I need this exact engine for my 67 mustang. With no change to the exhaust
Wow my 428 needs a upgrade.
Is that the crate ford racing 535? I just put one in my superformance cobra, i went with a super victor and a holley 750 XP...Love the look of the dual quads but wonder about keeping all that stuff in tune? Nice looking build!
Steveo H ~ No it’s the crate engine 351W.😎
What did you end up putting that engine in ? I have a 95 f 150 4x4 id like to swap the efi 302 for the 427.
The sounds of heaven. Then GOD created the Ford engine and found it good!!!
Sweet!
Ford has the better sound all day. Blue oval power
I need that in a 66 Ford F100 mated to a tremec 6 speed stick!!
Im going to do a similar build. Did you go with hydraulic roller, or solid roller cam?
Badass 427w man!
Why is it you have the idle set so high on that hot-stand? Is that the norm for these stroker 427w's?
54 dislikes are the 54 Chevy guys who shit their pants.
voltage regulator going out? or is it reading high because of no accessories?