INSTALL Heated Hand Grips & Thumb Warmer KIT | Pure POLARIS Sportman XP 1000 850
Vložit
- čas přidán 29. 06. 2024
- Warm grip and throttle lever are a must for cold weather New England trail riding!
+Stay tuned for more videos...every Tuesday & Friday!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon links below:
Polaris 2877363 Handwarmers: amzn.to/3oATP5V
Polaris 2877364 Thumb Warmer: amzn.to/37Jaf6t
ODI Cush Grips: amzn.to/3kMzF6A
ODI Roque Grips: amzn.to/2JcsQxw
ODI Vapor Grips: amzn.to/35Jr3HG
Handlebar Grab Bar: amzn.to/3mlKI7o
Want to SUPPORT the Channel? Info & Links below!
SUB & DONATE Here - / johnfranconh
FOLLOW - / contemporary_homestead
& HERE! - / contemporaryhomestead
Stay tuned for more videos!
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
CZcams Music Library - Zábava
Just installed mine on my 2020 sportsman XP1000 eu version, great tutorial followed step by step. Nice content, you have to continue this way! Thanks
Glad it helped. Thanks for watching!
Nice video but you skipped over when you attached the heating element to the grips and the thumb warmer. Why would you leave that out in the video?
nice upgrades. ill be doing all these besides the lift kit, adds wear to the diffs and axles.
I just installed the odi vapor grips. I love them.
Nice man!
@@JohnFrancoNH you were right about them. There pretty sweet.
We used to spray the bar with hairspray to lube it to slide the grips on, then it dries and they don't move.
I just ordered my heated handle bar kit and new grips
Nice man. You will love them. Thanks for watching!
Muchas gracias Jhon muy bien explicado me serviría para mi profesión saludos cordiales de España
Thank you very helpful
Glad it helped
Anyone tried to wire the thumb and handguard heaters into the same switch?
Hi john always enjoy your videos. I have a Honda HSS1332 just like yours 2018 model. It is stuck in free wheel mode. ( you know how you pull up on the two handles to release the track). Yeah its stuck in turn mode. On one side I can push the transmission arm forward and this allows the track to reengage and drive. Although if I pull the level again it gets stuck in spin mode again.
The opposite side. I am not able to push the transmission arm forward. Without being too forceful. Any ideas what the problem could be?
Never had that happen to me. But I would start at making sure the steering cables are adjusted properly.
@@JohnFrancoNH ended up being covered by warranty. They said the steering cables were seized and replaced them. I kept thinking it was something to do with the transmission.
How are you enjoying the Rogue grips? Should I change or stick with Oem ones?
The ODI Rogue are great but i have recent changed them to the ODI Vapor ones and i love them. Lots of cushion and still good firmness. Very comfortable if you do alot of ATVing. Thanks for watching!
John - do you have a link for the ODI Rogue grips? All I can find are the lock/clamp on ones which apparently won’t work.
Amazon links below the video. Thanks for watching!
What lift did you use for the 850? I have the same one and can't find one. They all say not for the arched rear arms. Also having a hard time finding wheel spacers. Thanks
Highlifter 2" lift. My wheel spacers will be going on ebay soon.
Where you unplugged those square connectors do you plug them back in. I have a Highlifter I found those square connectors but they were plugged into
If those connectors are being used then you will just have to wire it up right to the battery terminals. Thanks for watching!
@@JohnFrancoNH thanks man figured out the dealer used it for that my wireless winch remote
Where is the best place to ground the wires? Thanks
battery or bare chassis
Just curious why did you put the OEM exhaust back on?
Got sick and tired of the excessive drone from the big gun exo when out trail riding, plowing & not being able to hear other riders speaking because i had to wear ear plugs when machine is running. The 2018 and up have the newer designed higher flowing stock exhaust. So removing the spark arrestor gives more bark. Much happier now.
Did this plug into factory ran wires? Also would it work with a sportsman 570? Thanks
Yes there are factory accessory power leads in and around the battery. Thanks for watching!
Well looks like I am buying those right now lol
@@ScottieBMan What year polaris? Should be orange wires with white stripe right upfront near the battery.
@@JohnFrancoNH 2020 570, your link on Amazon looked like they work on 570’s so pulled the trigger on them.
Thanks for heads up on wiring, will refer back when I get them 💪🏻 I love the plug and play wiring stuff. I added the KFI winch...perfect plug and play option using all factory ran wire.
@@ScottieBMan Those are the polaris factory ones. Worst case just strip the wires and crimp on a ring terminal and go straight to the battery.
What grab bar is in Handel bar ?
Thanks for watching!
Not to knock you, but that insulation is useless when compressed like you did.
yes i know what you mean but it still does something
You totally missed the most important part. The wiring. Defiantly a useless video. The air gune trick is something every should know. But still, red wire here, brown wire there. You missed all that bud
And thats what the instructions are for...
Your girlfriend? If she drives an 850, you need to put a ring on it.
Yes i already have LOL
Omg dude just shut up and get to it! Wasted a half-hour with rambling about everything but adding the heaters.
Save yourself time everyone and find another video