So I purchased a used GTX and it has sat in my garage for 6 months. its completely empty with no ink. I went to plug it in and it will not power on. The temperature in my garage is maybe 40 degrees Fahrenheit. Can you help me with this problem, and where can I get a new usb card to install on the unit. Mine is damaged.
I had the same problem and I called a technician y told me to reduce that problem I had to enclose the underneath and I add a dehumidifier and in my case the temperature it was an issue as well so I added a little heather under there too and that stop the issue
Im not getting any white to print. No white on test print. We did all cleaning of the parts. We did super clean. We did white ink circulation. Nothing.... any tips?
Hello Idol can you share us your print setting for white and colored shirt.. settings of your Highlights and Mask saturation, Brightness, Contrast and cmyk for better resolution and detaild in printing.. thanks in advanced Idol!!
Hi, I'm also have that machine, did you always on that machine everyday? Sometimes I not using it on 2 weeks but I'm always running it for white ink circulation everyday, but I noticed my white ink decrease. It's seem wasted for me, eventhough I'm not using it... Any suggestions for saving white ink
No we don't switch it off cause we use them everyday. If you're not printing volume then this machine not suitable for you. It will run cleaning every 6hrs. Best is to switch it off if you're not using then but not for too long.
@@amedionteo , most of my clients and my work demand me to do silkscreen and microfiber, 😂 I already buy that dtg machine for further expand my business cause some silkscreen can't achieve dtg result. Did you using microfiber /jersey on dtg machine. Give some tips, cause my supplier not recommend me to dtg on microfiber /jersey
We dry the PT for a little over a minute with 160-170celcius.. Curing for 160celcius on 60s.. Depends on design and color of the hoodie. If red hoodie definitely need hovering.
Great real world reView !!!
Hello sir, I have problems with correct pretreatment, for black tshirts what speed and pressure you set for pretreatmaker iv? Thank you very much.
Hi we dont use pretreatmaker so have no idea. What ratio u mixing now with water? What brand pretreatment?
So I purchased a used GTX and it has sat in my garage for 6 months. its completely empty with no ink. I went to plug it in and it will not power on. The temperature in my garage is maybe 40 degrees Fahrenheit. Can you help me with this problem, and where can I get a new usb card to install on the unit. Mine is damaged.
I had the same problem and I called a technician y told me to reduce that problem I had to enclose the underneath and I add a dehumidifier and in my case the temperature it was an issue as well so I added a little heather under there too and that stop the issue
Yeah if humidity and temperature out of range then it will run more frequent.
Im not getting any white to print. No white on test print. We did all cleaning of the parts. We did super clean. We did white ink circulation. Nothing.... any tips?
Check if your pouch put in correctly with the gold stripe rolling it up nice and tight.
Hello Idol can you share us your print setting for white and colored shirt.. settings of your Highlights and Mask saturation, Brightness, Contrast and cmyk for better resolution and detaild in printing.. thanks in advanced Idol!!
I set Highlight at 5 and Mask 3 for all t-shirts. For thicker materials I increase highlight to 6. Thats' all. Other settings don't touch.
Have you tried replacement inks? Do you always use chips to fill your GTX PRO BULK machine?
Yes cause its provided.
@@amedionteo Have you tried an undamaged chip?
@@user-nj6dg8ti4h what u mean by that? Chip provided is usable. If damaged can exchange.
You don't have to use it, you can raise the ink level manually in the machine.
Why don't you want to use replacement inks?
Hi . Where do I get one, and what is the price for it ?
What item u referring to?
Can you reuse that wastage of ink?
Waste ink cant re-use. :)
Hi, I'm also have that machine, did you always on that machine everyday? Sometimes I not using it on 2 weeks but I'm always running it for white ink circulation everyday, but I noticed my white ink decrease. It's seem wasted for me, eventhough I'm not using it... Any suggestions for saving white ink
No we don't switch it off cause we use them everyday. If you're not printing volume then this machine not suitable for you. It will run cleaning every 6hrs. Best is to switch it off if you're not using then but not for too long.
@@amedionteo , most of my clients and my work demand me to do silkscreen and microfiber, 😂 I already buy that dtg machine for further expand my business cause some silkscreen can't achieve dtg result. Did you using microfiber /jersey on dtg machine. Give some tips, cause my supplier not recommend me to dtg on microfiber /jersey
@@hamizishah3177 no i dont DTG on microfiber cause its not productive. Lots of issue and processes i rather just heatpress.
@@amedionteo ,I already saw your another video about dtf printing using dtg machine, can you provide me your supplier no, I'm also from Malaysia. Tq
@@hamizishah3177 u bought Brother GTX in Malaysia?
U source around for DTF supplier. My supplier is freaking expensive and im looking for other now
What brand pretreatment did you use for the sweatshirts?
We're using third party pretreatment by Onetextiles.
@@amedionteo do you think they sell it in USA? And what is the name of the pretreatment
Nope don't think so. Got one company selling similar product. You can search for DTG Connection.
@@amedionteo Thank you!
Where do you buy the inks
From Brother of course. ;)
For 50/50 hoodies what temperature fo you use to cure the ink? Also how long do you hover?
We dry the PT for a little over a minute with 160-170celcius.. Curing for 160celcius on 60s.. Depends on design and color of the hoodie. If red hoodie definitely need hovering.
Hi bro can you tech me make the platen for brother gtx by yourself ?
Sorry bro we don't make custom platens. ITs genuine from BRother.
@@amedionteo Thank a lot bro.