CRUZE p0299 and P1101 code fixes Dave's World Super CRUZES
Vložit
- čas přidán 19. 05. 2023
- Join this channel to get access to perks:
/ @davesworld2132
Contact me at www.supercruzes.com
Dave's World Discord Server / discord
Need CRUZE parts?: www.davescustomparts.com
KNN Air Intake System 16-19 CRUZE amzn.to/3U1cmqs
/ turbobayperformance
Ikon Spoiler Parts / tools
Ikon Spoiler amzn.to/3HLhtXX
6MM studs for spoiler amzn.to/3YBf09l
6mm nuts for studs amzn.to/3x8NRi6
fender washers amzn.to/3XiDbZ4
Black RTV Silicone amzn.to/3jQ00FF
Battery powered grinder amzn.to/3XnyzRk
Batter powered ratchet amzn.to/3HNGhyy
Batteries amzn.to/3jJEJ0m
Charger amzn.to/3DQovtl
Hole tap and die set amzn.to/3RM5Vbn
Tools
Spark Plug Gap Tool: amzn.to/3MhQyTT
Expensive Spark Plug Gap Tool: amzn.to/3GOKl0w
Firewall wire tool: amzn.to/37fVCd6
Dave's World build parts
NGK Spark Plugs: amzn.to/3y12LbS
GM Delco spark plugs: amzn.to/3xYTW2i
Turbo gasket with heat shield: amzn.to/3slHMx9
Link to the CRUZE IKON Spoiler: amzn.to/36d7VpC
Link to my KNN Air intake: amzn.to/3CDAkRF
Link to the 18" Enkei EV5 Wheels: amzn.to/366pUxQ
Link to gunmetal 18" versions: amzn.to/3vXAAK0
Link to Glow shift boost gauge : amzn.to/3Cxh7Be
T fitting You can use: amzn.to/3nIs0K2
vacuum hose I used: amzn.to/3IAEfjZ
Air fuel ratio gauge: amzn.to/3JFDRko
Fuse circuit add on : amzn.to/3uNcNf0
Universal gauge pod: amzn.to/3EiyRBc
Handy free car buying book! amzn.to/37Dr7Om
CRUZE p0299 and P1101 code fixes Dave's World Super CRUZES
P0299 is a diagnostic trouble code (DTC) that indicates a low turbocharger or supercharger boost pressure. Here are some possible causes of the P0299 code:1. Faulty turbocharger wastegate solenoid2. Malfunctioning or defective turbocharger3. Intake air leaks or other pressure system malfunctions4. Clogged air filter or restricted air flow
1. Faulty MAF sensor: The mass airflow sensor (MAF) measures the amount of air entering the engine and sends this information to the engine control module (ECM). A faulty MAF could cause the P1101 code to appear.
2. Vacuum leaks: Any leaks in the vacuum system can cause the P1101 code. Air leaks in the vacuum system could cause a reduction in pressure in the engine, leading to poor fuel economy.
3. Faulty throttle body: The throttle body controls the amount of air entering the engine and is controlled by the ECM. A faulty throttle body could cause the P1101 code to appear.
4. Intake air leaks: Any air leaks in the intake system could cause the P1101 code as it disrupts the proper air-fuel mixture. The leaks could be in the hoses, gaskets, or intake manifold.
5. Faulty ECM: If the ECM is not communicating properly with the MAF sensor, it could cause the P1101 code.
6. Dirty air filter: A dirty air filter could also cause the P1101 code by obstructing the air flow into the engine.
It is important to have a qualified mechanic diagnose and repair the issue that caused the P1101 code to avoid further damage to the engine.
Due to factors beyond my control, I cannot guarantee against the improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not David who is seen in this video.
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all products, I recommend testing the gauge before beginning the install process.
⚠ DISCLAIMER:
While I strive to make the information provided in this video as accurate as possible, I makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I am not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
You have perfectly explained underboost problem diagnosis. I hope I had specialists like you in my neighbourhood!
Thank you. If not reach out to me at my website and I can help supercruzes.com
Been having this exact problem and could not figure it out. Thanks for making the video!!
No problem. If you need more help email me at customcruze@gmail.com
Theses types of videos👌🏻 always great. Always learning something new 💯
What’s up you handsome devil?
Great video. Pretty cool you make aftermarket parts. Fun having options.
Hi. Thank you. I appreciate the boost of confidence!!!
A huge help! Thank you for making this video! Cheers 🤙
Thank you for watching it!
Great video showing propper fixes to the p0299 issue. Ive currently got that code but CEL is intermittent. Cruising in 5/6 gear with minimal throttle input causes a major lack in boost untill i restart the car. Then it goes away. That's been my summer. Praying it goes away until i can do something about it. And i just found this video. I'll be reaching out to you my friend 🤜
www.supercruzesstore.com is my youtube store. I have a wastegate that will fix that issue. It's so common if I look at 20 Cruzes 19 of them typically need a new one.
Have you solved it? , i have the same issue in 5/6 gear with minimal throttle
@@Atrekonda message me through my web site
Thanks for showing this, I remember facing problem.
Great video, super helpful. I have 2018 Chevy Cruze, LT, and I just think they're cool little cars. But, with that said, a lot of little things seem to go wrong with them. Another thing, don't ever miss oil changes/coolant levels with with these cars; it seems that with the turbo, they run very hot....
Yes I have mods to help with the heat on these at supercruzes.com keep in touch. I have a few mods that keep these running much better and lasting longer.
Thanks for the video.
I had a factory turbo 17 with no problems w/ 144+k miles then replaced it giving that code.
Wish I had seen your channel. :(
Like your work thank you :)
No problem. Keep in touch!!!!!
Thank you. I’ve been having a lot of issues with my 2018 Chevy cruise. It keeps throwing those 2 codes. I get reduced engine power and when that happens it’s like driving a slug. My C0299-00 code says large vacuum leak in the brake booster. But as brakes go mine is fine I believe. I thought this probably has no issue with the brakes but must be for some other component. I am going to go home now and check all of those things you mentioned. My husband says it’s more like I hit a bump that’s knocking something loose. My biggest issue is it’s the only car I have and this week I start a new job which I’ll be driving around my region from town to town to merchandise in a chain of grocery stores. I live in the middle so most days I’ll have a 45 minute to an hours drive to a store and my car has to run correctly. I’d just say screw it and go trade her in but since Covid has ruined everything I’d built up like credit and financial well-being, it’s super hard to do much of anything. It’s been super difficult and last week I changed out my MF Sensor because my OBD2scanner kept saying it was faulty. That worked for about a day or two then the check engine light keeps coming on periodically. My husband helped me and put my hoses back on after we cleaned the throttle body and stuff but forgot to tighten everything down as we were running a bit late and he thought I did it and I thought he had done it. So tightened those and ran great for a good week but now a bunch of those codes keep popping up so I’m going to check what you said and will be contacting you to get some things and fix my car once and for all. Thank you. You are very easy to understand and I subscribed to your page as well.
Always feel free to reach out at customcruze@gmail.com
Very nicely done, great video. The Cobra in white color looks nice!
Hey how are you! I appreciate you coming to the live stream the other day!
LOVE that Cobra...flexing HARD
@@bigdogchrisl Going to be driving it tomorrow for the first time in a year I think. I need to literally blow the dust off of it and take it to the car show up the road with the kids.
@@davesworld2132 Not a problem my friend, just busy w/ the wife's stuff.
@@bernardaflores1720 I sent you an email the other day I hope she gets better. While I might not have problems like hers I do understand the stress she’s under!
I subscribed and I really appreciate this video. I was lost on what to do and I like this car but I want to avoid some future issues. You'll be hearing from me soon.
Thank you. Def keep in touch.
Great video, Dave. I need to get a charge pipe. Does upgrading the charge pipe require a tune update? I assume it would, but I'm not sure. I was just thinking about this two days ago.Great video
I hope you’re doing well? It doesn’t some situations it depends on your build. When you want one just let me know what modifications are done to your car.
Excellent video! I have Code P0299 in Hyundai Tucson 1.6t 2016, they changed the Turbo and the problem still persists... any advice you can give me
Def have a boost leak. Could be a leaking intercooler pipe or even the intercooler core itself
I had a 2018 Tucson & I cleaned the throttle body, butterfly valve wasn’t opening properly because of debris inside the air intake. I fixed the leak and ended up replacing the throttle body. Cleared all my codes and drove like it was brand new after!
Nice video Dave
Thank you.
Hey 👋 so im currently on vacation away from the house by 4 hours. I got this code and check engine light 0299. No smoke, no changes in the running of the 2017 cruze. I can hear the slightest hint of a turbo sound.... kinda! Am i safe to return home in this with my family to have this problem fixed by a lol non over priced surgen lol
Thanks for your help... again i know nothing is wrong with the car except tye code
Awesome information-where are you located?
Hi, love this video!! Very helpful. Wife's 2016 (gen 2) cruze popped 0299 at first, i bought her your wastegate a few weeks ago, seemed to run a bit better and it dropped the 0299, but now pops 1101 code. I think next I'll try the cheapest/easiest MAF clean, but if that doesn't work, where do you go next?
Also, for anyone wondering, the wastegate he makes is freaking TOP NOTCH. It is beautiful, and extremely high-quality. You'll need it eventually, do yourself a favor and buy one.
Thank you I appreciate that. It's possible you have a boost leak. Check your charge pipe under the turbo. It's common that gets damaged I have an upgrade for it. Also check your throttle body to see if the intercooler pipe is loose. @@THILLPHOTOSCOM
@@davesworld2132 awesome, I'll look at those next!! Thank you so much for all the support on this platform!!
@@THILLPHOTOSCOM no problem. Keep in touch!
I just ordered the air inlet and outlet pipes for my equinox from you and if I have any more issues with the intercooler I'll probably get your upgraded one. I really can't fault the stock intercooler as it had no control over the semi that flung the tote into it at 50 mph. I just want to drive without boost leaks until the wheels fall off with a little better than stock performance.
Good lawd!!!!!!! You OK?
@@davesworld2132 Yes it didn't mess up the front of the car apart from a small scratch on the headlight cover. Some of it went underneath and cracked the transmission case cover but a piece of the pallet impaled the intercooler. I didn't even know it because the wood was so stuck that it didn't leak until 3 weeks ago. I was pulling my hair out trying to figure out where the leak was and then one morning while I was down on the driveway at the front of the car I noticed some wood sticking out of the intercooler that looked like a broken shish kabob stick. I started the car and it was leaking. Unfortunately that wasn't the only place as my boost pressure is still low. I returned to stock programming so the turbo wouldn't try spinning too hard to make boost while I looked for it. That's when I decided to look for upgraded piping which led me to you. I don't look forward to taking the front off again but hopefully that will be the last time.
@@puffnstuff12 ouch. Message me though the website let me know what order you are so I can move you up and get your truck back on the road.
@@davesworld2132 I sent you a message in our chat.
So i just bought cruze and have check engine light was on and i was p1101 was causing it but also p0299 was on I changed the air filter cleaned throttle body but it was oily and checked the and intercooler was oily so probably i need that part that u explained but i didnt catch what to look for can in the link
Best to email me so I can help better. Customcruze@gmail.com
Great clip
Best gen 2 channel our there.
Where's that 10mm?
Great video. I have a 2012 and would like to tweak it. It has 283k km.
What would you do and how much would it cost?
My daughter drives the car regularly but would like to have my own fun too.
Your thoughts and opinion please.
Many thanks
Dino
@@dinonaccarato2989 hi I have a few packages. Are you in Australia or Canada?
Good day sir, I have a 2014 chevy cruze and have had to dump to much money into it over the past few years. Finding your website and CZcams channel has been a blessing. So my question is I have a totally different factory air box that your so this factory oil catch does not exist on mine. And with this the pcv line goes directly into the turbo. So I have the under boost codes and I’m not thinking that some of this oil has been going into my charge pipes and intercooler (I do have some oil in the charge pipe going into the throttle body) so my thought is I possibly have oil and some debris clogging the intercooler. So my question is does your kit with the catch can have all the extra hose to reach to the turbo? Again mine does NOT connect into factory air box as shown on all other crises I’ve seen.
This video covers the Gen 2 Cruze yours is a gen 1. Yours has a different set up BUT! I deal with that problem all the time with some customers who need help with your generation CRUZE. If you want to email me directly I can show you which parts will work to stop the problem on your version of the car. Here is my email and a link to my website.
Customcruze@gmail.com
Www.supercruzes.com
@@davesworld2132 just sent you an email. Thank you kindly sir.
No problem I messaged back@@LittleSmaugSilverDragon
My Daughters 2017 Cruze keeps popping P1101, replaced MAF sensor, cleaned throttle body (oil on the throttle plate). Also noticed pressure coming out of the dipstick tube when running. could this be caused by the PCV system? There seems to be no power loss or drivability issues, any help is definitely appreciated.
Pressure in the crank case is normal to an extent. could be normal could be an issue. The reason I say this is because P1101 is air flow related. Check your air intake, MAF sensor, and the hoses going to the PCV. If you need help message me through www.supercruzes.com
you guys deliver to canada? and if i wanted to get a wastegate for my cruze and i have stock setup just with an cold air intake how many lbs would u suggest for the wastegate? thank you
Yes we deliver to Canada. No more information about what’s done to your car or what you’re planning on doing. Customcruze@gmail.com message me on my email so we can talk a little bit more.
I just bought a 2016 cruze limited 91k on i need help on what I should do to upgrade but not go crazy i have a p0299
It’s usually the wastegate here is a link to my version I produced. It has a lifetime warranty too. supercruzesstore.com/products/2016-2019-cruze-wastegate-upgrade
I got a p0299 code on my cruze 2016 and my car runs very well No symptoms. But, the check engine light dis appears and appears 4 or 5 days later and this repeat. Please help on this
@@NotFound-vb6xs it’s a weak wastegate it’s starting to fail100%. I have brand new ones with a lifetime warranty at www.supercruzes.com
On the Gen 1 Cruze there was an issue with the PCV Valve do Gen 2 Cruzes have this issue as well I've looked for it but I can't find anything on it. It always refers back to the video you did with the PCV fix on black widow
Yes I have a fix on the Gen 2 at
Www.supercruzes.com
@@davesworld2132 ok I see that but does the PCV Valve actually have to be replaced like the Gen 1?
@@christopherliong955 with the fox kit it blocks off the oem one and replaces it with a serviceable one that can be changed in 30 seconds.
Awsome video, would this be roughly the same for 2017 buick encore,?over the summer the low boost code popped up 2 times each time it went away after a day or to and hasn't come back it's been bout 4 months
Yes I offer parts for the encore I just haven’t finished updating my website but you’re welcome to contact me and I could set you up with a part that will help fix the problem.
Www.supercruzes.com
Great thanks
Спасибо. В принципе всё понятно , что как и почему!
I’ve got a 2014 Chevy Cruze with a p0299 code and I’ve done a pressure test and my waste gate actuator opens. Is that supposed to happen. I’m only putting 15 to 20 psi on it
How much pressure does it take to open? Is the car tuned?
Not saying this is the right thing to do, but I've had a p0299 code and it was my turbo wastegate was seized *the little swivel got stuck in certain spots* so I sprayed PD Blaster around it and it fixed it (for time being, still driving, but no more check engine light) but if someone's in a crunch, it'll free it up right away.
Yea that will work for a bit luckily!!!! Keep me posted.
Do you have a clamp upgrade kit to swap out the weak stock clamps?
Hi. No but I have a pipe upgrade so you do not have to deal with those crappy pipes anymore. supercruzesstore.com/products/cruze-equinox-malibu-upgraded-intercooler-pipes
This bigger turbo will work with 2018 Buick Encore Premium AWD ???
I have one that fits. I didn’t get it on the site yet but I’ve supplied some Buick owners
I have been having problems with the boost on my 2017 Trax AWD, and it's frustrating...
Of course, codes P0299 and now its P1101 that is shown on my diagnostic unit. No leaks but changing the Mass sensor today. No Boost sensor available but ordered it and will pick up tomorrow. Hopefully would narrow things down. After viewing your vid, I see that there's more to it, and yes, I'd like to change the intercooler hoses and all, if it will make the difference as well. Looking to sell soon, since it's becoming a headache, but need a family vehicle to be honest. can't sell the Trax if has issues. It has only 60K. Any suggestions?
It’s the wastegate I have a lot of Trax customers buy those from me to fix the truck. Email me at customcruze@gmail.com and I can set you up with an order.
I'm here for my 2015 buick verano 2.0L turbo. My turbo is on the back of my motor. Would your wast gate work for my car?
I have a different version for that truck plus I also have a bigger turbo if you ever want to upgrade.
Awesome 👌
What mods should I start with on my gen 1 , I wanna defiantly get the pcv fix kit , ?
Hi I have a full catalog of parts for the Gen 1 at www.supercruzes.com
I have a 2016 Cruze with the K&N cold air intake upgrade. I have been getting intermittent P0299 under boost codes that have been becoming more frequent. I was going to change the turbo, but the one I ordered based on my vin turned out to be the wrong one. It seems from googling my turbo looks to be the turbo for 2017+ not 2016. I didn’t find any noticeable air leaks, so I’m thinking maybe your upgraded waste gate and or that system to reroute the pcv oil?
HI. Thanks for calling today. We will get this beast fixed up for you!!!!! LOL
@@davesworld2132 thanks for the wastegate, it’s like a new car now with your upgraded wastegate! So glad I talked to you before wasting money on a turbo. Looking forward to getting some of your other upgrades down the road.
@@kencolville4253 me too!!!! Keep in touch.
Hey, my 2017 Chevy cruze is saying low engine power why and how can I fix it
What’s the code ?
I'm getting the p 0101 p 0229 nd p 1101 code where do I start with fixing this
It would probably be better to email me on the website but there’s a couple places you can start let me know what the best form of contact is
I have a Malibu ‘18 with that code for underboost. Do you make an aftermarket wastegate?
Yes here is a link. supercruzesstore.com/products/malibu-1-5-and-2-0-upgraded-wastegates
Thank you so much, I just spent over $1600 dollars to replace my turbo boost and it ran fine for a couple months and now it’s doing it again. The same codes???? Please help
Hi. Message me through www.supercruzes.com and I can diagnose the car with you.
What would make my turbo suck oil and put it through the inner cooler back into the engine and it smokes and no power please help
Message me at www.supercruzes.com so we can diagnose your turbo.
Dave, hi, i have a 2020 chevy sonic turbo and its show a p0299 code, but i think the intercooler its likend but also i want to replace the coolant pipes cause its liken too, are you made coolant pipes too for chevy sonic?
@@vidalprieto4085 I can. I’ve had people ask me to a few times. Also if the only code is p0299 and nothing else it’s probably the wastegate. If you had a leaking pipe you would get other codes with it. How many miles are on it?
@@davesworld2132 right now just today, the check engine its turned off, and im trying to see and i dont see any problem on the system except for a little liken by the intercooler, im gonna change the whole intercooler system with pipes in the future, but right know i need the coolant pipes cause i have to replace the water outlet coolant cause its liken and i want to take advantage for change the whole pipe system
I send you a email we can direct contact to show you ?
@@vidalprieto4085 I started designing a bunch of parts for that car
@@davesworld2132 nice, yes, so how can i order it? Can you give me a way to contact you?
where r u located?
I've been facing the infamous p1101 on my 2019 chevy Tracker (which is the Brazilian version of the Trax, very similar to the gen 2 cruze mechanically) for the past few months and haven't been able to find the cause. I've changed the intercooler, checked the pipes for air leaking, cleaned the throttle body, replaced the MAF sensor and finally, after seeing this, I've opened up the valve cover to check for a clogged pcv orifice, but that wasn't the issue. P1101 is the only DTC I get, however, there are times when I hit the accelerator (after a short stop) and the car simply won't respond for a couple of seconds, or it will take a lot longer to switch up gears when I'm already running. Would you be able to point out what could I be missing? I own a simple scanner, is there any sensor I could monitor to try to figure out the issue?
Thank you for your time
Your engine is the older Gen 1 engine if memory serves. It’s best to email me at customcruze@gmail.com
Did you get help?
What is the trick to getting the intercooler hose back on at the turbo?
They usually just pop back on. If it’s not connecting anymore some thing might be worn out. I have replacement pipes for those that are much better than the stock ones. If you’re still having a problem
@@davesworld2132 thanks it's a new hose I guess it's just a tight fit and little room for leverage to force it back on
I'm getting these 2 code in a 2023 equinox would it mean the same thing?
Yes and I also posted about my PCV reroute it fixes the ice issues in the intercooler system.
Great vid. ? I have a 2011 Cruze it only builds tops 9 psi of boost is that normal? have replaced wastegate, checked turbo, lines etc, no leaks found. thanks
This will fix that problem. Heres the link. supercruzesstore.com/products/2010-2016-cruze-sonic-trax-wastegate
@@davesworld2132 ok it does have an adjustable one in it and I tightened as far it will go. Just fyi. But if a tighter one will work great! Lmn thanks!
@@jamesmcdonald5718 If it’s the adjustable OEM one that is not adjustable. It’s a universal waste gate that General Motors uses to switch between certain turbos for different production lines you cannot add preload to that it will not last long
@@davesworld2132 OH good to know, I had other turbo cars and could boost more that way but this turbo is obviously different. thanks again
@@jamesmcdonald5718 yea with the ecotec it’s finicky if not done right
I think I need new turbo on minds 2016 gen 2 with 260,560 miles on it. All stock with an intake that is it.
@@lilhutt1 that’s pretty amazing!!!!! If you want to further diagnose here is my website where you can reach me. Www.supercruzes.com
Channel sent from god only problem I have is I found it after I bought the “fhose”
Thank you. Give it time. it’s common for the new one to leak. Message me if you need help!!!!!!!
@@davesworld2132 thank you
i waste 5000$ in cuze 2012 broken 3rd gear do you know if in the 1.4 tranny are good i need cheap car i think about the 1.4 but im scare
Depends on the cars history. I have 3 cruzes. 2 are awesome one needs everything fixed lol.
lol perfect thanks ! @@davesworld2132
P1101-p0299-p2097 what the price range on normal fix? Wife’s trax not looking to good
I have parts that can fix the issue as low as $260 . Email me at customcruze@gmail.com
How much would you charge to do the mods to my cruze?
It’s best to email me at customcruze@gmail.com so I can point you in the right direction.
So basically I should replace everything?
Lol. Possibly. But typically 1-2 parts fail that cause an issue.
What about 2020 equinox?
Yes and I have a wastegate that will fit the equinox and fox the p0299 supercruzesstore.com/products/equinox-1-5-wastegate
Where are you located? I just got this code on my rs Cruze today. I would like to know how I can fix this myself and not take it to Chevy and pay an arm and a leg.
Near NYC . You?
@@davesworld2132 I’m on the west coast, Bay Area. Can I buy the parts from you and have a mechanic install them?
@@jaimehipolito5667 yes. Www.supercruzes.com or davescustomparts.com
@@davesworld2132which wastegate is the best for my RS 1.4 L engine?? I would like to buy it asap but I’m not sure which one to get. There are about 3-4 options on your site.
💯
My 11k miles 2017 malibu has been parked for two years, when i went to check the oil the dipstick broke. I went to take for a test drive and ENGINE POWER REDUCED came on the dash.
Sounds like your Malibu is mad at you. It’s Mali-moody lol. But do you have an active code in the ECM?
@@davesworld2132 🤣🤣🤣
@davesworld2132 No I wiped all the code a while ago and don't remember. It drove fine then. I don't have access to one for a while. I'm away from the car again.
@@gushardy4421 Your car is probably going through a relearn cycle I need to know what the code is when it becomes active
#CruzeFam
It’s okay you can say this set up for the Malibu and Cruze are garbage with all this plastic
Yea that’s why I make metal replacements at www.supercruzes.com
So, next time I get a car, let it not be a GM 👍🏼
Lol
Ok y'all. I need some answers on a few things for a GEN 1 2012 Cruze RS LTZ. Currently building car to be a cool little street car. But can someone please.lwt.me.know if a bump box and trans brake be installed on a Gen 1 Cruze????? If anyone knows please let me.know here. Thanks
No. Well anything can be done with$$$$ what power level are you at?
I have a problem that is probably close to that. I started getting error code p0301and p1101, and I thought it was the sparkplugs and coils so I re plece them both. but I saw that the pcv line that goes from the top of the engine to the turbo was leaking oil and it was cracked so I replaced the pcv line and the valve. but I am still getting the same readings
What year is your car also if you want to message me directly I could further diagnose.
Have you solved it? Was it the intercooler??
It can be a few things.