HARBOR FREIGHT PRESSURE WASHER | PORTLAND 1750 ELECTRIC PRESSURE WASHER | REVIEW & TESTING
Vložit
- čas přidán 5. 09. 2024
- We went out to Harbor Freight and bought the Portland 1750 pressure washer based on quite a few comments asking to review it. I was surprised at the results so enjoy the video and the bloopers at the end!
Portland Pressure Washer - amzn.to/35C0xn8
Follow Me on Instagram - / carswithkeav
Check out my Amazon Storefront - amazon.com/shop/carswithkeav
Products in Video:
Braided Hose with fittings - amzn.to/3ALgLWK
Spray Gun Adapter - amzn.to/3tX8zRK
Portland Pressure Washer - amzn.to/35C0xn8
3/8 Hose with fittings - amzn.to/3ALgLWK
Spray Gun and Foam Cannon - amzn.to/3gFRQKQ
3/8 Swivel - amzn.to/3AJqkW9
Brass Garden Hose Shutoff valve - amzn.to/3d39O93
Garden Hose Quick Disconnects - amzn.to/3FT4Sih
Products I use:
Awesome Multi Tool Wrench - amzn.to/3ghAOTM
MJJC Foam Cannon - amzn.to/3v00rO6
MJJC Site - www.mjjc.com/c...
Pressure Washer Hose - amzn.to/2WEaD2M
Pressure Washer Hose Reel - amzn.to/2HwjdIZ
MTM Swivel Spray Gun Fittings installed - amzn.to/3dTuKPh
VE52 Pressure Washer - amzn.to/3fWWqp9
1.1 foam nozzle - amzn.to/3ocVCj4
pressure gauge - amzn.to/3qWOIQG
1/4 T fitting for pressure gauge - amzn.to/33SsEho
Gtechniq Products W4
Code Heidi10 for 10% off at www.gtechniq.com
or check out the Gtechniq section of my Amazon Storefront.
Sponsors and Discount Codes:
Sliplo - HEIDI at or 15% off sliplo.shop/ca...
Gtechniq - Heidi10 for 10% off at gtechniq.com
Blackvue - Heidi10 for 10% off at blackvue.com/r...
BBS Wheels- www.bbs-usa.com
Eurofed - www.eurofedaut...
Street Approved Customs - www.streetappro...
Liqui Moly USA Canada - www.liqui-moly...
Camera Equipment:
Main Camera - amzn.to/2IbheXB
50 mm Lens - amzn.to/3anD06y
Camera Light - amzn.to/3jtDAHW
Lights - amzn.to/3hhxGXD
GoPro - amzn.to/3wnxTxZ
Dashcam - amzn.to/38jFlOB
Tripod - amzn.to/3hoVCcZ
Gopro Mounts - amzn.to/38hmnrN
Main Camera SD Card - amzn.to/2x00FeV
Gopro & Dashcam Micro SD Card - amzn.to/2Ti2PQ0
Main Camera Batteries - amzn.to/2IqoIGF
Filters - amzn.to/2VPYPYL
My Social Media:
Instagram - / carswithkeav
Facebook - / heidithe335
Tiktok - wm.tiktok.com/...
#HarborFreight #PressureWasher #BestPressureWasher
yesterday i got up at 7 am to wash my car. i literally had everything set up my two buckets, wash mints, etc. come to find out my ryobi finally gave up after years. i saw this review and literally drove straight to harbor freight and bought it and i love it! thank you!
Awesome, all it takes is some upgrades and it does really well.
How it it holding up I bought it 2 days ago and I’m now seeing some negative reviews don’t know if to ride with it or return it
This pressure washer is amazing!! I only use it to wash my cars. I’ve had it for over 4 years now! Definitely got my moneys worth.
It’s a great unit for sure. A few little things to make it better and it performs so well.
I just bought this for 70 bucks at Harbor Freight. It's fantastic. It really shines if you replace the hose and accessories.
Yeah, they have some good sales here and there. Heard it went to $60 at one time too.
I just purchased this unit last week for $65 on sale. For the price you can't beat it. Just get the Nozzle Adapter for the Gun and this unit is worth every penny. Don't expect it to do Heavy Duty Work but Light/Medium Tasks this pressure washer is great 👍
They have some great deals on it. I have heard of it being $55 sometimes. The adapter is a must.
Where do you find the nozzle adapter
@@brendarunkle8796 They had them right next to the pressure washers themselves hanging on a small rack all individually packaged. I believe they are called the "Portland Quick Connect" it was $8
what is the adapter name my friend?
@@rnflorida4071 Portland Quick Connect
7:46 Hi, thank you for the video and for your tests. I found them very helpful. Just FYI, the pressure washer hose will need an M22 15mm (not 14 mm). I measured it with a caliper. The 14mm will leak.
Looks like they have changed the pump or at least the exit since my review. I bought another one to build a best starter pressure washer kit and it was 15mm then and used an adapter to convert from 15mm m22 to 3/8 quick connect. (Sound changed for me as well so for sure a change of some sort.) When dealing with 15mm its always best to adapt to quick connect or convert down to 14mm as that gives you so many more options.
I just bought this on Friday for $65 at harbor freight parking lot sale this weekend. I was about to return it before I saw your video thank you for telling everyone about the 1/4 adapter. You have gain a new subscriber.
Yeah, stock spray head is horrible. Glad somebody makes this adapter.
I don't entirely understand the bucket test,but very impressive detail oriented test results! Cool idea to ditch the handle. Harbor Freight should give you store coupons or something for your review!
Just a simple way to measure the gallons per minute. Start timer and pressure washer at the same time and stop at one minute. Amount of water in the bucket would be the average flow of gallons per minute. The higher the flow the better for rinsing off cars. As you increase the nozzle size it allows more water flow which is why I was using multiple sizes so buyers can decide which nozzle they need. When you increase water flow the pressure decreases so there is a sweet spot for the best cleaning power.
My oldest son bought one for me today 9/21/22 and works great no issues really like the soap dispenser and really didn't use that much soap.
That's great to hear!
i got this as a gift from my uncle who used his for a minute and I did NOT like how the spray came out
i also bought the foam cannon, but found out the hard way that it wouldn't fit
That adaptor was the piece of the puzzle i was missing, thanks!
Yeah, the unit stock is not great. Have to upgrade a little to get it running right.
@@CarsWithKeav You’re absolutely right, I hope some of the stuff I bought with the links you gave helped you out ;)
They have this on sale again this weekend, along with the short throw polisher. $69.99 right now for the pressure washer and $49.99 for the polisher.
Wow, that's a great deal!
Buy a high pressure garden hose nozzle with soap dispenser for $5.99 (or splurge and pay $11.99). Probably will give you more psi.
Anything is possible.
I looked at the prices for a new uber-flex hose, foam cannon, adapters, guns and such and nearly choked. The price of the attachments was way more than what I paid for the Portland. But after some mental grumbling I went ahead and shelled out the cash and all I can say is that the difference is night and day. I've since added quick connect adapters to all of my sprinklers and nozzles and my little cheap pressure washer does everything I need it to do.
I started out the same way and yes the investment into even say my setup the accessories are more than the $350 pressure washer. They are just nice to have and make the car washing experience so much better. The Portland is the best bang for your buck unit out there too.
picked this up today. definitely getting that new hose. and foam gun. makes the product a 10/10
Did you get the 20% off? I know they are doing a 20% off coupon on just about anything I the store this weekend. This unit is great once you upgrade for sure.
@@CarsWithKeav yes sir i did .
@@syxne7419 Awesome!
Hey Keav, Thanks for this video. I have this same electric pressure washer that I purchased mainly to use for smaller jobs like cleaning the riding mower and both cars while I had bought a foam cannon on Amazon several months ago and never gave a thought how I was going to install it on this unit until watching you use the quick connect spray gun adapter. I like this unit for quick ease of operation while I have a gasoline engine power washer unit for cleaning larger jobs like the house and garage siding areas. 👍👍👍
That adapter is a live saver for many brands out there. Not much thought is put into the design and functionality of these as our demographic of DIY car washers is very small. They are making for the masses.
thanks so much, idunno why foam gun stuff always confused me but i’m getting exactly what you got, just picked up the power washer unit next will be the little mods, thanks for the good info
Awesome, DM me on Instagram if you have any questions.
@@CarsWithKeav appreciate that a lot, will find out tomorrow as the reset of the stuff arrives, already got my quick connects for my house hose setup and i love that lol even put one on my regular garden hose, i got a 1.1 orfice for my gun too 7 bucks. super excited lol.
I just buy a harbor freight pressure washer too but I don't like the spray tip too. I was thinking about putting on quick connect on
It’s a great machine once you add the upgrades or at least the adapter.
Thanks for this. Just got mine today and foam gun doesnt work. I have an after market gun. This adapter is a life saver.
Glad I could help!
I started my detailing buisness with the Portland than I upgraded to the active VE52 not even 6 months and it started acting up on me so I went back to my Portland but the numbers I got are way different than what u got I use a custom 25 degree 2.5 nozzle I put together and it gives me 1300 psi and about 1.4gpm which I use for the first initial rinse of vehicle when I do the final rinse I use a regular 40 degree 3.5 nozzle that gives between 1050-1100 psi and 1.7gpm i was watching another CZcams channel called imjoshv and he also got those same numbers that’s crazy that ur review gave u different readings 😂 oh well that’s life sumtimes haha
I got a feeling that every pressure washer is different. I know of Josh and wondering if he has amazing water hose pressure coming form the commercial property. Possibly my bucket may not be accurate? My vE52 numbers were lower than his as well.
@@CarsWithKeav yikes!!!
Good video! Is the soap you’re using “high foaming”? I tried the same Portland package with soap dispenser and yours works much better.
It is a higher foaming soap. Most normal soaps don’t foam well.
Got mine on sale for 69.99 plus if you are signed up for harbor freight credit card, you get 20 bucks off of anything in the store on your birthday.
Saw that when I was at the store the other day. You have to keep up on the deal there and check everyday almost.
6:51 "it can foam that's for sure" lol another great review brotha. its always cool to see you customize the pressure washers to make them more efficient like with that adaptor. I'll be keeping all the reviews in mind when I buy my house and I set up my detailing cart.
Awesome, you let me know when you do that and I will help out all I can. I could have a stockpile of stuff for you to use. LOL
What's the adapter called?
I've been using this pressure washer for years....I did upgrade the hose and gun (it was a little tricky and required some special quick connect fittings)
Its a great unit for sure, good thing I have shelves full of fittings. LOL
Was already gonna subscribe due to the quality of the review but definitely going to after seeing the bloopers at the end 😂 now I’m gonna have to look into some accessories for mine cause I picked it up the other day for $70 at harbor freight, tried it for the first time today. Time to get my detail kit going!
Nice, welcome to the addiction that never stops. LOL I saw they were on sale. Somebody told me they saw them at some point for $60.
I have the same one at three. Oh tip at 10:50 pressure and I get a gallon and a half with the same each units different
Yeah, I think every unit is different. I think I am going to weigh the bucket and water in it and see if its accurate. The measurements could be off.
Lol thoes bloopers tho. I thought it was just me that did that behind the scenes. haha
I have a certain set of skills and blooper is my best one. LOL
Another great review! Love harbor freight for their selection, I think this def a good contender for the final cart 👍👍
Yeah, there quality is getting better as well.
Thanks so much for the idea of the connector from Amazon to hook up my MJJC Foam Cannon Pro
You're welcome. Most manufacturers don't care about anything other than what they put in the box, but there are always ways around their crazy games.
I bought this unit about 5-6 yrs ago I paid $69.. event if I did'nt know that it sold for less years ago, I'm not sure if I would give harbor freight $94 today for this unit??.. I can't find the soap container???
You can still find it from time to time on sale for as low as $59, but usually is $79 most of the time when on sale.
After having this unit for 6 yrs .. I just took it out of the box, so I hope it will work and it will do the little jobs I plan to do, wash my upper intake manifold after I remove it from my truck, siding, and pavers , no major jobs yet.. Great video by the way
Harbor Freight now warns you that they charge a 20% restocking fee if you return this for any reason.
Thanks for the valuable info. Appreciate it.
My Harbor freight store told me no restocking fee if it's not opened.
Sure, but why would you buy it without opening it. They are really telling you that if the product is not fit for your purpose or breaks, you're on the hook for the restocking fee. This means you should automatically add 20% to the price when you are comparing it to other products based on the value.
@@mikerobinson187 after trying it out I think I'll get a ryobi with 3 year warranty and higher psi instead. Harbor freight accepted my return. I told them I wasn't happy with it and they waived the restocking fee.
I mean, you can keep swap it for a new one 😏 🤷
How you get so much foam? I changed to 1.1 orifice and tried two different foam guns and it’s still not foamy. I’m using the Adams car shampoo, could that be the problem? Should I use a snow foam labeled shampoo? Help lol
Adam’s shampoo foams pretty good depends how much you use. A foam soap will do better, but there are other factors such as water quality. Harder water does not foam as much. Try using warm distilled water. You could try a little more soap as well.
Great review. And I love the bloopers at the end 😆 Thanks! You earned a sub 🙂
Appreciate that!
What is the link for hose attachment that connects to pressure washer,quick connects and pressure washer gun?
This is usually what works to convert the pressure washer to quick connects. amzn.to/4aSaMkg Sometimes Portland changes around their pump suppliers and the opening is 1mm off so if it leaks bad or doesn't fit you need this adapter. amzn.to/3QleoTm
Thanks for this honest review! It help make up my mind to get this thank you
You’re welcome
Soo I’m seeing everything you’re wanting to push to sell in your description. EXCEPT for the hose with the 14mm connector that attaches to the spray gun.
Sorry about that. Not sure how I forgot to put it there. Thanks for letting me know and I have added it. amzn.to/3ALgLWK
@@CarsWithKeav ooo that’s it?? I did see that. You did post that sorry. I just thought that was the garden hose for the back of it.
So good unit if you add a hundred bucks in upgrades
No it’s good with just the $12 adapter. It gets even better as you improve everything else, but they are wants and not needs. The adapter and a nozzle are needed and that’s it.
Mine only lasted about two or three months then the gun started leaking really bad.
I never really used the gun because it is just not that good. The pump is great which is why I like them. I just use a slightly upgraded hose and sprayer works great.
Good call. Tons of info here and with the links ⭐⭐⭐⭐⭐. Thanks for posting!!
You're welcome
So I bought the adapter and the gun but I don’t get how the adapter goes into the gun? I’m sure I’m just missing something because it seems easy. Is the adapter only for the old gun or does it work on the new one? If anyone could help I would appreciate it haha😊
Adapter is only for the old gun that comes in the box. If you bought a new gun you would need to replace the hose in order to hook it up. If you have Instagram or Facebook DM me @carswithkeav on both and let’s see if we can’t get you squared away.
Omg the end is the best part of this video. Lmao.
Thanks for watching all the way through and getting to the good stuff. LOL
I just got one of these...it definitely needs upgrades cause I can't get it to foam up like you did
Some major factors to soap foam is your water quality and softness. For instance if I did everything the same and used water form the coat of Florida I would most likely get way less foam due to the hardness. Getting a better foam cannon does help you get the most foam out of the conditions you have.
Quick question I don’t know why but I tried my foam cannon stock that it came with and it doesn’t foam up at all it’s horrible any ideas why ??
So many reason for no foam. Tube inside the foam cannon is not secure, clog in the tube, soap is not a foaming soap, not enough soap, really hard water, dial not turned in the right direction.
@@CarsWithKeav thanks so much for the reply I will look into all this
I wonder if like a portable power station battery from Amazon would work better than a gas generator, what do y’all think?
Depends on how long you want to operate.
Ja ja pense que solo ami me pasaba grabando videos!! Siempre algo sale mal!! Y hay que hacerlo otra ves!
LOL
what size generator would i need to operate this pressure washer . like how many watts for generator
I think at least 1650 watts. It’s a 13 amp motor it says so converts to 1560 depending on the type of circuit. You could have spikes depending on nozzle size and other variables. Really safe would be to have 1800 which would deal with just about anything on a 15 AMP circuit. This is all based on 120 volts.
$76 at harbor freight if you get the discount!
Yeah, it’s always off and on sales and I have seen it as low as $59 in the last year.
What was the connection for the the handle to connect the foam cannon
It’s an adapter you can find here and the connection it uses to the foam cannon is a 1/4 inch quick disconnect. amzn.to/3RpIruy
Mine isn’t making the sound… I’m so confused
Which sound are you referring to?
Can you please give me the link for that extension thing from the thing you said you got from Amazon,I’m having the same problem for me and I need that so badly please thanks
Hopefully this is what you are referring to amzn.to/3tX8zRK
@@CarsWithKeav yes thank you so much
Thanks.... What's the adapter that we should buy from Amazon?
This one amzn.to/45ZYfck
Can anyone tell me the name of the adapters he use for foaming. The adapter the bottle and everything. Thank you.
This is the adapter amzn.to/3tX8zRK and this is the foam gun which they raised the price a good bit since this was filmed. amzn.to/3v00rO6
I know it says don’t connect to a power strip, but it doesn’t fit in my outside outlet. Will it still be okay to use if I run it connected to a strip?
As long as the extension cord is 14 gauge you will be good.
You can turn the wand 90 degrees isn’t it?
I have not been able to turn it 90
Degrees outside of turning the whole wand sideways. Mine just has the ability to adjust the fan spread.
thanks for the video. i think i might pick one of these up soon and eventually upgrade the tubing and gun. .. .also love the out takes. hahaha
If you are looking to get one always check their website for coupons and sales. It has gone as low as $65 last week.
I have the same pressure gun, can that connect to the hose that comes with the pressure washer?
I have found no way to do that yet. Have to upgrade from the unit itself with a new hose that can connect to an aftermarket spray gun.
Awesome video, what kind of soap do u use? Is it a wash and wax?
In this video I was using Gtechniq W4 Citrus Foam. I do not use wash and wax combinations. I like to keep the cleaning and protection separate. Wash and waxes also don’t foam very well usually.
I bought mine for $89 and used it once now it’s out of warranty and I’m stuck with this
That sucks. Did you have any issues or you just don’t use it much. These get snagged up on Facebook Marketplace pretty quick for around $40.
Mine keeps pulsating. It doesn't hold consistent pressure. Anyone know what the problem could be?
Its going to be one of 3 things leak at the gun or unit, Not enough water flow coming from the house, possible clogged nozzle. If not any of those might be a defective unit.
@@CarsWithKeav
Thanks for that. I exchanged it for a new one. It was still covered under the 90 day warranty. Had I waited 3 more days it would have expired. I bought the 1 year extended service plan too. Hopefully I'll have better luck with this new one. I'll give it a try later on today.
Dumb question but is there a soap product you recommend for vehicles and for home exterior?
I would have separate products as the difference between exterior paint and clear coat are very different. Exterior paint can take way more chemical abuse than car clear coat. For the House Super Clean and really any PH neutral car soap is good to use for the car. I really like Incredible Suds by DIY Detail. Check out their website I have a discount code CARSWITHKEAV that will save 10%
Another guy reviewed it and had to return it later , actually twice as the engine was leaking. Do they make a better one?
Not sure if Portland does, but I have not seen a pressure washer than somebody didn't have an issue with it. People have returned Kranzle and other high ends for similar issues. Manufacturing processes for this industry always have at least a 5% failure rate. I have had it for a few months now and used about 10 times with no issues.
Is the pressure comparable to what you have at the car wash ??
If you use the right nozzle tips you would get the same as the self car washes which is between 1000 and 1200 PSI. You will not get the same kind of water flow as those big commercial machines. It will feel different because of that, but the PSI will be the same.
The bloopers! 😂😂😂😂
That’s what I’m good at. 🤣
U did good on your review. I like it. Im going to buy one. Thank u.
You’re Welcome!
Thanks for the review I’m not going to buy it.
You’re welcome, that’s my goal to inform so you don’t have to make a purchase without knowing.
I just got that same hand foam gun but it doesn’t fit into the 50 ft hose that you recommended I need help 😢
DM me on Instagram with some pics or video of what you have. Well get this sorted out. You can also email at keavneywv@gmail.com
@@CarsWithKeav bet I just did rn I’m getting a haircut I think i did something wrong I’ll get back to you asap
LOVED the bloopers!
I'm pretty good when it comes to making bloopers. LOL
Is there a reset for it to bring back its pressure
It just has its start stop pressure. It keeps the same pressure the second you pull the trigger. No reset that I know of.
What were you testing when you were shooting the water in the bucket?
GPM, Gallons per minute. Higher the GPM the better the rinsing ability when washing cars. Also, cleaning efficiency for any task it the best mix of pressure and flow.
Thank you for the review! At 6:52, what adapter are you using to spray vertically? :)
This is the adapter amzn.to/3tX8zRK You would need a 2.5 orifice nozzle for cars or 1.5 to 2.0 for work around the house.
Is this good enough for to clean the driveway? Thanks!
It will clean to a certain extent, but will take some time and effort. I would use this to wash cars. To do my driveway I use a gas pressure washer.
Awesome! End is the best! Lol thank you.
Got to love those bloopers!
If I get the spray gun and the foam cannon, do I still need to get the adapter? I’m guessing the stock hose fits on the gun? Thanks!
The stock hose has a connection that will not work with any aftermarket Spray Gun. You would have to either use the stock gun with the short adapter and stock hose or get an aftermarket hose to go with the aftermarket spray gun and foam cannon.
@@CarsWithKeav sounds good. Thank you for the reply!
Ever used an extension cord with it? I know it says not to in the manual but Incase the need would ever arise is it possible?
You can use an extension cord with any pressure washer just needs to be a 12 gauge at the least. Most like to deter from using them because people like to use cheap extension cords that are not built for the length or amperage. You can use 14 gauge, but the extension cord must be under 50 feet. Over that you will for sure need a 12 gauge.
@@CarsWithKeav okay I got a 14gauge at 25 ft so that should be alright
Have u ever tried testing with the gauge between the gun n hose??
I have and get the same results almost every time. I find it easier to see the readings past the gun and its the PSI closest to the tip.
@@CarsWithKeav Awsome keep the knowledge coming god bless fam
Thank U Sir!
You’re Welcome
What adapter do you have when you rinse it @ 6:55
That would be this one. Shortens up the gun. amzn.to/4bWwX8Z
@@CarsWithKeav I meant the spray nozzle on the end of that. Thank you for responding 🙌
@@albert333pool That is a 3.0 nozzle which I think is the best mix of pressure and flow for this machine when it comes to car washing. amzn.to/44YyYiF I prefer these though for a little more they help from accidental touching among other things. amzn.to/4bXyICJ
@@CarsWithKeav Thank you so much! 🙏🙌
@@albert333pool You’re welcome
Great video. Very helpful with all your links. Thx.
Thanks so much!
Do you lubricant the water pump and how often
I have not lubricated any of my water pumps. Most of these cheaper models are not serviceable.
@@CarsWithKeav they might be talking about pump saver cans that you through the machine when you’re done, removes water and coats the o-rings. I use that or rv anti-freeze that’s cheap and non-toxic. Makes a difference with preventing minerals and corrosion from building up in machine, beats me why hardly anyone talks about it
Wount that psi mess up the paint
I had a different tip I mentioned in the video that would get me around 1k PSI
The pressure washer will not put out pressure
Possibly you might have a bad unit? GFCI showing a green light when you reset the power?
13:31
I hate those hoses. I replace them instantly. 🤣
Be careful with extension cords on the manual it’ll tell you what max length is recommended I’m pretty sure that’s how I ruined my first one thank god for insurance 😅
Have to make sure you have the right gauge. 14 gauge at up to 50 feet will supply the right amperage. Problem is most people’s extension cord is 16 gauge and not up to the task of a 15 AMP circuit.
@@CarsWithKeav I see thank you, I'm not well versed on this so I assumed my outdoor cable I had for my leaf blower would work but when I read the manual I realized it was way too long it's 100ft cable
@@Mustanggt505 I think I’ll add this into my videos when it comes to supplying power via extension cord. Appreciate you bringing up the subject.
@@CarsWithKeav that's a good idea 💡, you have a video on maintenance already? I know it's not much but pump saver and bleading the air out in the beginning is all things I learned after ruining a unit 😭💀
For every one good compliment there are 20 bad ones lol what do you expect for 80$ 😂
More or less. I actually have more luck with lower rated products than higher ones sometimes. LOL
got one for $29.99 at goodwill
Awesome, I check goodwill often, but never found anything good yet.
How did you get that foam cannon on the pressure washer?
AT 6:08 I explain the adapter you need to allow the gun to use most foam cannons. Here is the link to it. amzn.to/3zBLxms
13:00 hahahahahahah 😂
LOL I didn't even notice that.
Have this exact pressure washer, has been a great tool. not 1 issue with it
It's been great for me as well.
It's really sleazy that you were so desperate to use affiliate links for everything that you put one in for a product that's not legitimately sold on Amazon (Harbor Freight doesn't sell anything on Amazon).
I said in the video go and buy at Harbor Freight. Many have asked for the link on Amazon so I added it to the description. If you don’t like the way people do things make your own video on this product and do it the way you want. No matter what you do somebody comes along and comments a bunch of BS. Nobody is forced to click anything.
🔥👍
Thx
Mine surges
Have you checked for any leaks? Is there enough water supply coming in? Could possibly be something stuck in the nozzle as well. Just some of the common things that cause this.
@@CarsWithKeav what do you mean water supply! I’m new to this
@@1slwfk7 Water pressure and flow from your garden hose. Some houses have low pressure and sometimes the pressure washer is pulling faster than the supply coming in.
my guy connected to an extension cord 🤦🤦🤦🤦
14 gauge electrical cord perfectly fine for up to 50 ft on 15AMP. It’s not a cheap crappy one that most would use.
If you dont want it u can give it to me i need one i wanna start my little car wash business
My mother in law has been using it and loves it. If you catch a deal at Harbor Freight I have seen it as low as $59.
👍👍👍👍
Thank You
this video feels illegal 😂
🤣🤣🤣
Carwash
Drop this man off in Ukraine with this pressure washer, a couple quick connects and a 100' Uberflex and he'll have that war ended in a matter of days.
Don’t forget the MJJC foam cannon and a few gallons of soap. I’ll get it cleaned up. 🤣🤣
Omg what a waste of $ and time… sorry but you’re video was very helpful
That is what reviews are for the good and the bad.