My High Flow Nozzle is better than a Volcano hotend!
VloĆŸit
- Äas pĆidĂĄn 15. 06. 2024
- Use the code "CNCKitchen" to get Curiosity Stream for only $14.99 a year! curiositystream.com/CNCKitchen
I tried to build my own high-flow 3D printing nozzle by soldering pieces of copper wire into a regular V6 nozzle! Can this patented method substantially increase the melting rate?
This video is purely for educational and non-commercial purposes. If you want to recreate one, please check your local patent laws!
Thanks to Carl from 3DSolex for allowing me to show you these results!
Get 3DSolex high-performance Ultimaker print cores and nozzles (Affiliate): geni.us/gnPT5J
Website article: www.cnckitchen.com/blog/diy-h...
đ Support me đ
Patreon: / cnckitchen
Join as a CZcams member!
CNC Kitchen Threaded Inserts: geni.us/CNCKInsertsChoice
Merch: teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: geni.us/CNCKPrusa
PayPal: www.paypal.me/CNCKitchen
Shop at Matterhackers(US): www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): geni.us/zHvnB
Shop at E3D: geni.us/CNCK_E3D
đCheck out The Meltzone Podcast: / @themeltzone
đ Equipment used in this video:
CHT Nozzle - V6 Compatible (Affiliate in DE/UK): geni.us/U6M8s1K
CHT Nozzle - Mk8 for Ender 3 and similar (Affiliate in DE/UK): geni.us/OevmhbU
3DSolex Matchless Nozzle (also in 0.4 mm): geni.us/m7Jg9
E3D Toolchanger (Affiliate): geni.us/E3DToolchanger
E3D Hemera Extruder (Affiliate): geni.us/CNCK_E3DHemera
High-Quality E3D nozzles (Affiliate): geni.us/MmXLSuY
Cheap nozzle set (Affiliate): geni.us/MVMHt
Unleaded solder (Affiliate): geni.us/maC95ug
Small drill bits (Affiliate): geni.us/R8Fp
đ„ Related videos:
Bondtech CHT Review: âą Does This make Volcano...
How does extrusion temperature influence flow: âą How fast can your hote...
High-flow testing on the VORON 0: âą High Speed Printing: H...
Micro 3D printing: âą My High Flow Nozzle is...
đ Further Links & References:
Core Heating Patent: worldwide.espacenet.com/paten...
â My gear (Affiliate Links):
đ„ CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: geni.us/mqWM
đAUDIO
Rode Video Mic Pro - Shotgun mic: geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: geni.us/XMD2N
Rode NT-USB - Studio Mic: geni.us/YVONvy
đŽ LIVE STREAMING
Elgatoo Stream Deck: geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: geni.us/imhD
Logitech C920 - Overhead camera: geni.us/ViVgB
Follow me on Twitter: / cnc_kitchen
Follow me on Instagram: / cnckitchenyt
Chapters
00:00 Introduction
01:35 Building a DIY High Flow Nozzle
03:40 Patent
04:48 Curiosity Stream
06:12 Extrusion Tests
08:36 Design Variation #1
09:34 2-wire DIY High Flow Nozzle
10:30 Print tests / Inherent stresses
14:50 Summary
#3Dprinting #diy #highspeedprinting
DISCLAIMER: This video was sponsored by Curiosity Stream. - VÄda a technologie
Use the code *CNCKitchen* to get Curiosity Stream for only $14.99 a year! curiositystream.com/CNCKitchen
DIY or buy a high flow extrusion system? What's your take?
You could actually patent this yoursel
Very interesting, i wonder what difference it would make if you had the wires poking about a third into the melt zone from each hole on an unenlarged chamber x wire version, it would be a bit more fiddly to make but since most of the space is still open it might impede/affect the flow less while still give more surface area for heat transfer.
Would induction heating help keeping the insides of the nozzle warm?
Hi CNC,
What about using a copper or brass insert? like a triangle where the mid-points of the 3 sides are folded to connect at the center? it might result in a more symmetrical splitting and recombination of the filament
Maybe you could make a vertical cut through the thread, insert a piece of copper sheet metal and braze it in place. It would have more surface than a piece of wire.
If you screw the nozzle inside a M6 nut you have a flat face on the nut where you can start drilling. Very interested video and results!
that's a nice idea!
Smart !
Id use an old heater block but a nut is also a good idea.
Predrilling the nut should make the process really simple.
@@ralfr321 And that's called a jig. I was thinking it would be a great idea, but making it from a simple nut is a brilliant idea!
Big thumbs up to 3D Solex/Carl for being all for this video. Some companies get way too uptight about these sorts of things!
I'm actually MORE interested in getting a CHT nozzle now.... (Don't wanna play with drills etc, as I don't have the equipment. :) )
Definitely! I'm sure he doesn't want to harm the industry with his patent. He just needed to make sure that he sees a return on investment for his idea and development.
@@DarkAlaranth yup! This is actually great advertising for the CHT nozzle. They are now on my list for possible upgrades.
Patents are logically inconsistent moral imperatives.
@@CNCKitchen To be honest I bought some CHT's just from the back of your tests, they're impressive, I'm flowing 50% more than even my copper V6's can do in the same space envelope, with flexibles too, which I thought would be more of an issue (although I'm having some retraction tuning trouble).
So I don't think he can complain too much at you DIYing some ;)
đ€Ż why didn't I think of this!? Impressive results really, I wouldn't have imagined it. Can't wait to see the results for a modified Volcano nozzle.
So i watched this video a couple days ago and I've been thinking about it a lot, primarily things like improving flow in mid-high flow applications. Volcanos, big build volume stuff.
It just hit me that something like this might also dramatically improve the speed at which you can run 0.2-0.3 nozzles, which is the biggest reason I don't use them. Also, it might help other flow challenged nozzles such as ruby nozzles.
Itâs all fun and games until your Urologist breaks out the copper wire, some solder, and a threading die.
Even with an MS in mechanical engineering and several years of 3d printing experience and cross training in metal 3d printing, you're unveiling insights that I didn't know about. These insights are very accurate and very well communicated. I mean you're saying stuff that's worthy of peer-reviewed literature and making it digestible for average hobbyists. Good communication in engineers is gold. You earn the gold my friend. Awesome work.
It would be fun to see the same modification made to a volcano nozzle, to see if there was any positive or negative gain in performance.
I was just about to say the same thing! I have a few spare nozzles for my volcano clone so I might just give it a try myself.
super volcano with cht tho
YEAH supervcano! Hereby named 'reverse porcupine'
It should work. But cht nozzle in volcano won't be as good.
watch the whole video ;)
A couple of nuts on the threads to lock the position, a dimple on the flat of the nut, and a center drill bit. If you have a watchmaker near by, this would be easyâŠif they find interest. :-)
Good point!
Most of the comments say to mill a flat spot, but this technique is clever for not requiring the threads to be destroyed.
And the nut can also be re-used as a guide if the hole came out properly centered. You could also just create a guide nut by applying the same technique to a plain M6 bolt before sacrificing nozzles
I forgot about the nut trick.
I completely forgot about the nut trick. Thanks for the reminder.
Kudos to 3Dsolex for being OK with you exploring this publicly! I had no idea about their product but now itâs on my radar and like the concept of the design đđ»
@@soundspark How about they sell their stuff and don't bother hobbyists? If Apple had patented a hole with some stuff in it, people would be outraged. The intellectual effort in their patent is a joke and the idea that increased surface area in a nozzle equals better heat transfer is as old as printers are.
In the end, I purchased a CHT nozzle from Bondtech, so 3Dsolex still wins lol. Definitely helped me push more volume through my system with a very easy mod.
@@JamieHarveyJr Same here, hadn't heard of them, now looking to be a customer.
Why not file the wire to a sharp line on the top? The 3d solex has very sharp edges that help shear the filament instead of forcing it against a blunt edge like the wires rounded profile
This is what I came to say, but leave the ends round for easier soldering
@@danieljenkins4213 Exactly, would even plug it by pressing the ends like a rivet, so the temperature limitation of the solder is removed
@@Tarex_ Peening probably won't make as good a thermal joint as soldering, and peening the second end so that the first remains tight is also tricky. I reckon silver solder is probably the best way, especially because we're not talking about mass production.
@@cooperised agreed, aluminum brazing rods are also an option
That's what I was going to say: file the the wire to a triangular shape with the point facing up. =)
To prevent the wandering, you need to pre-drill with a center drill. Essentially, it's a very wide shaft with a very narrow, and more importantly short bit. It's specifically designed to prevent drill walking during the formal drilling process by giving the twistie a place to start.
Are you using an edge finder to locate as well? This assumes you have a digital readout on your mill, but it's still doable if all you have is gauges on the spindles.
you can also center it with a feelergauge and a pin or end mill shank in the chuck. just bring your pin closer till you feel slight resistance with the feelergauge between the part and the pin and then move the tool up and over by the radius of the pin + the radius of the screw + the thickness of the gauge and you will be on center.
Also, drilling in a round surface can be tricky. Maybe if a nut where threaded on and super glued in place, you could use that as a flat spot to spot drill. The nut could then be used as a tool when making more hot ends.
You could also mill a flat onto the threads to give a nicer surface to stick a drill bit into. It would give you an easy surface to cut off excess wire & solder, although with a thread die it's already pretty easy
for these little sizes pcb drills may work. carbide though so brittle, but stubby
What about printing a jig that will hold the bit in place just long enough so it can drill the opening part, like half mm?
I used to make my own by just pressing a torx bit into the back of a nozzle so it deformed it into the filament and gave much more surface area.
How do you keep the threading on the outside from deforming?
@@GerManBearPig by holding the hex part i guess, and putting a nut in the outside...
@@GerManBearPig You could either put a nut around it before pressing, or recut the threads after.
@@GerManBearPig Put a steel nut on it.
@@Rippthrough Do you leave a small piece of the torx bit inside the nozzle or just deform the nozzle back?
2:20 Use an endmill to start the hole, or use a center drill and then the actual drill. The center drill is a drill but much smaller and is very stiff, so it doesn't wander, its used to start holes, sort of like a center punch
Always use center drill for accurate holes. And using an endmill to make flat is also a good thing. But in this case is enough with center drill :)
I'd probably also go through a thread peak on the front side so that the back side will exit in a trough. That SHOULD improve the end result if memory serves correct
Grind/mill the threads off and make a flat area to drill through. Tidy the cut threads up to remove burrs.
File down the wire into a shape approximating a blade. Youâd get the internal heating zone, and the flow resistance would decrease due to a decreased flow area reduction.
What about instead of inserting wires, we cut a longitudinal slot in the nozzle and insert a thin copper plate, like a splitter. Maybe more efficient and definitely easier to do.
First he gotta mill that shape. Which might not be easy
@@nilsirrah7672 you could just cut the flat (top) side of the nozzle with a dremel
@@nilsirrah7672 Why complicate stuff and start milling, when there's a simple angle grinder or a dremel. đ
Or perhaps file the copper wire before inserting it, so that the wire looks more like a sharp blade ?
@@champifun2 But the plate can be longer or shorter, so we have more parameters to play with. Basically cheaply replicating the production one.
Hi Stefan. Could you possibly try to file the wire into triangle shape before inserting it into nozzle? That might help with flow restriction.
i was about to comment that....
oooh smort!
Filing would reduce cross sectional area, and since heat flux is proportional to that area you'd reduce the heat transfer to the filament. Copper wire is soft though, so maybe hammer it into a different shape? Might still reduce area but not as much.
Thanks Carl & 3D Solex for being so supportive to this community exploration! I just ordered 2x CHT nozzles, looking forward to trying them out.
Hope you enjoy it!
I think you should try to make this nozzle again but have the rod that is going through closer to the bottom. Since it's around the top, the filament would have had very little time to melt at that point, so it is trying to push around that rod when it's relatively cold. However, if the rod was at the bottom, it would have already heated up mostly, so it could flow around the rod easier because it is less viscous. I think this could substantially decrease the resistance, hence increasing the flow.
Very good and logical idea ....
I think the point is that the copper conducts heat better from the heat block. Lower and it would become a heat sink instead.
One solution to drill is using a nut and drill the nut and the nozzle at one time. It's to find the center of the nut because it's a rectangle (or square).
this sounds brilliant.
It's *easy* to find the center of the nut
Thisâ
You've inserted wire perpendicular to the wall sides, but what if you would put it in angle? This might help with the flow and surface area. Anyways, briliant idea for video :)
I was thinking the same thing. It would be more difficult to drill though. You might be able to get some angle by machining a nut first, as others have suggested for centering.
@@aimlessweasel I would make a small jig for it. Could probably use a corner bracket and bend it to the angle you wish, then just fasten the nozzle to the jig in anyways you want and drill it with a drill press.
It would require a specialized tool/drill to make an angled bore. But it would definitely help I think
This is exactly what is diagrammed in the patent pictures that Stephan showed in the video. Good idea.
@@novaenricarter705 you drill the whole and tap the thread last
This should be explored way more than just putting one or more wires with varying diameter in the filament path!
Some ideas I'd like to see tested:
- different angles
- adding two rows of wires in an alternating pattern on the left and on the right side (this seems to be a case where a Volcano/Supervolcano nozzle may be necessary)
- combining different diameter wires
- shaping the wires before inserting (like triangular, notches or maybe bending the wire)
- using "spikes"/cut wire pieces instead of full width wires
- using different wire materials
- using a (maybe sharpened) sheet of metal instead of wire (may be difficult to build)
Only silver has a marginally higher heat conductivity than copper (less than 10 % more). Brass on the other hand, conducts heat a lot less well.
Building a prototype heaterblock and nozzle out of gold- or rhodium-plated copper or silver (to prevent surface-oxidation) should yield astonishingly great results.
A triangular shape of the wire with the sharp side up should also perform better, both because of better "cutting"-perfornance and a bigger surface-area after that. For an equal wire diameter, that should provide an improved performance.
There's probably an optimum wire diameter compromise between more heat put into the plastic while keeping a sufficiently large channel open as not to reduce the flow-rate.
If there is a snug enough fit between the hole and the wire, eventually helped by some slight taps with a center punch, there should be no need for soldering at all.
Your last idea might be pretty easy to do by sawing a slit into the threaded part of the nozzle, then solder in a copper plate.
@@Makatea By changing the material I was thinking less about improving heat conductivity but more about surface structure and longevity, especially with stuff like carbon fiber filament.
But how much would it help? Or is there a sweet spot between surface area and shapes that restrict flow? That's something you could test with different shapes.
I think soldering is necessary as you need to get the wire in and maybe hace different expansion rates at higher temperatures when using diferent metals.
Hm, I feel kinda stupid because I didn't think of that. I was in full machining mode and thought about killing a slit into the nozzle... Yeah, much easier that way.
I've had another idea just now, when using a metal plate as divider, how about adding a little spin tocthe filament? I'm not sure what this may achieve besides better mixing when pushing two colora through one nozzle, but maybe this distributes the heat more evenly in the filament or something.
@@Makatea maybe with a cutter blade! It may enlarge the area while keeping a bigger area
@@Makatea i thought that about the last paragraph, slot from the top and then solder the gap afterwards to re-seal the entrance pathway
Edit:
Stanley blade cut down and shaped?
If conducting the heat into the stainless steel will be a problem then i wonder is it would be possible to copper plate it?
Feel like thinner wire give a higher chance of the wire failing.
Refreshing to see that even after so many years of diy-3dp, the innovations still seek to push the boundaries. :)
Oh, yeah - and drill from two sides (after flattening) for better centering
Röhrenlot is nothing special... it's Sn97Cu3 right? This is non eutectic but it starts melting at the same temperature as Sn99 and Sn100, it just doesn't become fully liquid until higher up, but it will still have no holding strength at higher printing temperatures whatsoever just the same. There's kind of little point to it.
@@SianaGearz Huh, indeed, I am wrong/ you are correct. I meant SnAg alloy, but that too has a low-ish melting point. I assumed from my subjective observation (soldering-iron vs. propane torch) that the latter reached a much higher temperature, but this is not the case! Thanks for this remark :)
I literally bought a 3D printer because of you, I was robbed and lost a lot of stuff including my 3D printer and I still watch these videos because theyâre so good.
So before I had a printer, and after I no longer have one⊠I still enjoy these videos because your enthusiasm and knowledge is fun and interesting to watch.
Hopefully Iâll be financially stable enough to get another printer sometime soon, and then Iâll hav an actual reason to watch these videos! Haha
(I had an Ender 3 pro for about a month before I was robbed and lost it. I lost most of my belongings, but the 3D printer stung differently because I literally JUST got it.. aside from my sentimental stuff like the computer and old phones with all of the pictures of my recently dead dog, the printer bugged me the most. P.s. thatâs my pup in my photo. His name was Buster and he was the best boy ever.)
Who steals a 3d printer? It is hard to imagine a less convenient thing to try and discretely unload.
Sorry for your loss. I feel bad that they took you stuff. But seriously who the hell would through the effort to steal an inexpensive printer. Just wow.
@@HighVoltageMadness Usually a disgruntled family member or a partner, motive is not financial gain, but to cause as much damage as possible.
I'm so sorry for yor loss of your buddy and your things. I can somewhat empathize; our house burned a few months ago, so we ended up losing a cat and all of our belongings.
@@SianaGearz Something like that.
I was in the process of moving and my house was sold to a corrupt slumlord basically.
He randomly showed up with off duty cops and told us we had 24hrs which is illegal, we called our lawyer and got papers telling him to fuck off and it it didnât matter because the cops were idiots. They said âOh well, you can let the court decide itâ and escorted us out of the house.
Within 6 days we were let back into the house and given full time until the end of our lease which was still 2 months to move out but by then the scum bags ransacked the place, and stole everything. Most of everything was already packed and so they stole everything valuable and unpacked and dumped everything else and went through it all stealing everything.
Iâm currently in a lawsuit with the owner, the police department because of sheer negligence in allowing off duty cops to use police uniforms and vehicles to bully us out of our home. We basically have a rock solid case.
Turned out the owner was rushing us out because he is committing bankruptcy fraud on the house and his paperwork said that he lived there since he bought it, which is untrue because obviously I lived there. Itâs something he does with a group of people, they buy houses and then file for bankruptcy on it and then.. idk.. itâs fraudulent conveyance or something like that. Apparently they do it because my house (although kind of a shithole but not too bad) is currently worth like 13k⊠thatâs what the bank is selling it for. So his partners step in a buy the house for that much, fix it up and sell it for a huge profit.
Itâs a serious crime.
So basically what happened was, he tried throwing us out, our lawyers very quickly discovered what he was doing and he panicked and showed up with cops to throw us out. He basically trashed our stuff and told his people to steal everything and fuck with us because we exposed him. He knew we would be let right back into the house but wanted to ruin us.
My mother and I ate it, and continued going after the scumbag and found out that heâs done this to a bunch of other people.
So donât worry, heâs fucked.
So yeah⊠it was a fucked up situation, and we had a really difficult time finding a place to move into but Iâm settled and good now.
Was considering buying a volcano hotend! Now I have to watch this haha.
No..
Get the CHT nozzle.
For me the Volacno it's still the option. Too much effort with this.
@@Petro_Bandera CHT has zero effort.. volcano has high effort and changes dimensions.
volcano might be a better option for abrasive filaments.
@Rush buy a volcano and one CHT nozzle. Cut off the nozzle part of CHT and keep only the thread. Screw it into the heat block and then use standard V6 nozzles. So you get CHT splitter, increased length of volcano and cheap V6 nozzles
Also an engineering advice: after drilling an offcenter hole through one side, rotate your thing 180° and drill another one from the opposite side.
You'll have to bend the wire a bit, but it will be precisely centered.
I think part of his problem is that the drill bit is grabbing onto the threads. Seeing as this is a single thread it would not have the same results on the other side.
@@GoingtoHecq , ĐœĐ°ĐŽŃĐžĐ»Đ”ĐŒ ŃЎДлаŃŃ ŃĐŸĐČĐœŃŃ ĐżĐ»ĐŸŃĐ°ĐŽĐșŃ, ĐżĐŸŃĐŸĐŒ ŃĐČĐ”ŃлОŃŃ.
The off center hole could have been avoided if he centered it properly and then started with a center drill.
This is pretty interesting!
Thanks Adrian! Looking for some nice, high extrusion width prints from you. The 2 mm 3DSolex might be great for that even on a Prusa.
@@CNCKitchen thatâs a great idea! I was thinking to do something like that, thanks for the hint đ
@@CNCKitchen
How about cutting the nozzle along its longer axis, and putting a piece of copper sheet in the cut?
< || >
< || >
< >
..\_/
|| - cut with a copper sheet inside
PS:
You can also file the edges in the middle of the sheet that'll be inside the nozzle, to make it sharper to even further ease the flow.
I believe it could be relatively easy to do. Make a vertical (along the axis of rotation) cut on a bandsaw or with a careful cut with a handsaw. Cut a piece of copper plate to be slightly wider than the nozzle. Drill a bit wider hole the length of the copper plate (or skip this part if the flowrate is enough to reduce die swell). Insert the plate, solder it. If you don't want to solder, you could try to heat up the nozzle from its tip to expand it and put the plate in the freezer, then try to hammer it down the hole, but you'd have to work on the tolerances quite a bit for this to work (you'd have to be careful not to pry the nozzle open, too). You could also just tig weld it. Then the only thing left to do is to thread it and to file the upper parts of the plate to fit the shape of the nozzle's chamfer.
Talk to Stefan Gotteswinter and ask him to make you some custom nozzles! I'm sure that a collaboration would be very interesting for you.
This old Tony would be another candidate.
For higher temperature use, perhaps staking the wire in place instead of soldering it would suffice. Simply use a fine point punch to deform the wire and the hole, trim, and clean the threads.
Also using the fine point punch to center punch the hole location before drilling may reduce bit wander, as will reducing the bit length protruding from the chuck. Or use a center drill.
I tried it yesterday, no success. Also I think the temprature game will have it detach from each other due to the shrinking and expanding. Did you manage to have some success?
This actually increases my interest in the CHT seeing other implementations of a similar idea work really well
Hello Stephan,
I have to tell you that you are doing an incredibly good job. I enjoy and appreciate your channel and learn every time!
Please just keep up the good work!
Great video as always, Stefan! As a mechanical engineer, I always appreciate your analytical data and applications to material science. Interesting results!
Thank you very much!
WOAH! This is crazy Stefan! So cool! I love this idea, love your way to do this and even all the patent stuff! Great video! I love how comprehensive you go for your information!
You got so close on it, shows so much information about how this all works!
A few tips that might improve this:
1. You could increase the bore where the copper bar is to compensate for the obstruction the bar causes.
2. When you solder the bar, you can remove the excess solder by dropping the nozzle on a hard surface before the solder solidifies - the impact causes all the excess solder to splash off. Then clean the thread with a triangular file of a suitable size.
3. You can make the bar form and interference fit so that you don't need to solder it. Use some annealed copper wire (you can anneal it easily yourself) that is slightly larger than the hole you drill . Roll the wire between 2 smooth plates (6mm steel would be suitable) applying some force to the plate with your hand . Repeated rolling will reduce the diameter of the wire. When the wire almost fits the hole , heat the nozzle to expand the hole so the wire fits.
4. You should have added the second wire in the same orientation as the first. Putting it at 90 ° only adds flow restriction
You must find center with a edge finder or spinning a indicator. Then you MUST. Use a micro center drill you start your drill off straight. Done like that and you'll be with a few thousands of center and straight. Love what your doing over there and wish i could show you hands on proper machining but you will get it.
Notch the back of the nozzle for a solderless joint. Square the ends of the wire, then you can try multiple inserts with different cross section shapes, thicknesses.
The solder is important for heat transfer.
Amazing video.
1. Get thinner Copper wire.
2. You have to use Micro Drill Bits and a Small Mill, I have a Proxxon, but they are expensive.
3. File down the Wire into a triangle before inserting it and try to make the base of the triangle as thin as possible.
4. Use Silver Solder, or something that can withstand at least 250°C so you can print ABS.
5. I think 2 copper wires is best, but you have to get them very close together.
Here is a thought: saw/file a slit vertically into the nozzle and insert a break-away knife in the slit with the sharp edge upwards. Then use silversolder to seal off the slit from the outside and cut the thread. Gotta use the small break-aways, not the big one.
The blades you mention are too hard to cut a thread in.
Hmm, I'm thinking a vertical notch on each side just big enough for a piece of razor blade from a disposable razor to slide into.
No soldering needed if it fits tight, should still increase heat transfer, and would cause less resistance.
It seems like it would be possible to deform the wire inside of the nozzle to increase surface area while reducing flow resistance. Alternatively, with Silver solder, it might be possible add a few fins that break up the flow without closing off the flow through the center.
I love the inventive nature of your videos. They are not just made for entertainment purposes, and are still very interesting. Keep up the great work!
Love the investigation, and also like that this is done within the constraints of existing nozzles instead of needing a whole new nozzle/extruder system.
Try using thinner wires. They will provide lesser resistance and you can put many of them in one nozzle
Was thinking the same, would be very interesting to see a test of different wire sizes + as some have suggested: thin plates, as I guess a too thin of a wire will split well but not heat well + maybe deform under huge pressures.
I think that you could have also tried putting the second wire in the same direction as the first wire.
Also, a machinist could use a slot cutter to cut a slot in the nozzle, and add a thin plate of brass. Perhaps you could do it similarly using a hack saw.
Love your approach! When you added the single wire, you realized the need to open the input orifice. But, when you added the second wire, also you made comments about the resistance, yet you didn't try to open it up. I think you missed a great opportunity there. Nonetheless, great work as always, love your videos. Props to 3D Solex for being cool with these experiments.
Learned so much about nozzle flow from this video. Thank you so much!
Hey Stefan! I absolutely LOVE your videos and I can tell you come from an academic background with how you present your data. I had a request, could you show error bars and sample amount (N = #) in future publications? I think it goes a long way in critically assessing the data you're spending so much time collecting. I'm fully aware that variance in the data will be quite high and lowering it would require an exponential amount of extra effort, but I still think it'd be great to have with that pretext. Just some constructive feedback as a likeminded enthusiast of this field!
Hello Stefan, you started a nice project :). I am a trained precision mechanic or mechanical engineer. Therefore I would like to give you a hint how you can drill centrically in an external thread. Since you are soldering anyway, you can solder a platoo (e.g. a large pile of solder), then strike it in the middle with a center punch and then drill through it without running to the side. Greeting
Outstanding educational video. Please keep this videos. There are enough people doing printer reviews, but only a few people can do these kinds of videos
What a brilliant engineer - and teacher. Thanks for *all* your research and videos!
An idea (patent is pending): put a glass-coated nichrome wire to heat the material from inside.
Should be possible to melt a couple of cubic centimeters of material per second easily.
To make the whole endeavor easier, use 3mm system.
To easily coat the wire, just dip it in some electrically non-conductive epoxy.
@Lassi Kinnunen 81 sadly, It needs coating if you want to have any meaningful amount of it.
i don't think it would last long
even i have doubts in the copper wire..
@@RFi731 why wouldn't it?
@Lassi Kinnunen 81 because this is how electricity works in our universe
@Lassi Kinnunen 81 plastic may not be conductive (yet some are), but the nozzle and the wire itself still are.
Try a gold wire, hear me out:
no oxide layer = better heat transfer...
High thermal mass.
But gold has way lower thermal thermal conductivity than copper. Silver wire might be better.
$$$
@@dibblethwaite But copper oxidizes, gold doesn't. Copper oxide has a lower thermal conductivity than gold
@@dibblethwaite Silver might work better. Only one way to find out, and a great video "gold vs silver" pure click bait!
Might also be a good idea to use silver solder in general...
AWEWSOME video!
I never thought that this DIY modification would have achieved results like it did!
Outstanding analysis, it was a pleasure to watch. Very well filmed, excellent descriptive commentary, well done Stefan!
Glad you enjoyed it!
Aren't patents were invented to publish data, that you can recreate? Not for commercial purposes obviously. If you want to keep a trade secret, don't make a patent. đ€·ââïž
The Idea was to get inventors to disclose their inventions, to boost the speed of innovation. In return for disclosing the get a limited period where they can control the use of it.
Nowadays the patent system has unfortunately gotten out of hand a lot.
Your experiments are sound and very clearly demonstrated. Your test pattern you used to demonstrate performance is exemplary.
I saw a similar design in the TurboTap which was made to greatly increase the rate at which beer can be served. Splitting the flow up into small sections will create more laminar flow and greatly reduce pressure loss due to high friction turbulent flow. This is a very smart application
Super fascinating, as always!
Also, big respect to 3Dsolex for being okay with allowing you to create and share this video. :)
Love the idea! Thanks for this highly interesting research behind the patent.
Shout out to Carl for giving you the go ahead. I will be buying one of his nozzles due to this. That shows a real love for 3d printing and innovation. Good on you Carl!
Make a drill guide from a mild steel nut that matches the threadform of the nozzle, then thread in the nozzle and drill through the guide!
Incredible how a single component affects so many aspects of the output product. I love your experiments and investigations.
Great scientific inquiry. Thanks for showing your results (and many thanks to the patent holder for allowing this!)
And please allow me to congratulate you on the MOST seamless transition to an ad I have ever seen. I was almost half way through the ad before I realized!
Nice tuning !
I didn't expect this result
Cool! Geometry is obviously important not just for melting. Nice job! I just ordered 2 of the high flow nozzles that you reviewed. Thanks đ
These are the kind of cool, wacky projects I'd normally attribute to DIY Perks. Very nice!
It's nice that the patent holder was willing to talk to you, a win win really for both sides.
Your idea was stunning, I'll never thought about literally sticking a wire in the nozzle
Excellent stuff, as usual, Stefan!
How insanely clever is that!!! Gute Idee đĄ!
awesome testing as usual!
More wires and volcano testing, can't wait to see them!
In the meantime, def considering ordering some CHT nozzles for my Ratrig Vcore 3
SUPER AWESOME! I love this. I learned so much from this video! Exceptionally well made.
Thank you very much Stefan!!! Cheers.
Excellent investigation Stefan!
Center cutting flat endmill is what to use to drill accurately especially on round material
I think a cloverleaf shape inside or star shaped is not effectively covered by the patent but would probably be similarly effective.
Very interesting video and useful idea. You're a credit to the 3D printing community, thanks Stefan!!
Wieder mal ein sehr geiles und informatives Video Stefan!
I would love to see the same mod possibly even multiple times in a volcano nozzle. Because in a volcano nozzle there is more room for the specific attributes causing the negative properties to normalize. Such as the pressure difference and the die warping effect.
Thus making them easier to manufacture with similar results which implies potential for further improvement.
Also to manufacture a nozzle like this propperly it needs to be done on a lathe/mill combo machine. That way al the holes can be lined up correctly, mill the hex shape (unless your stock is already hex) and drill the horizontal holes for the wires first. Then use the lathe to mill the rest of the nozzle + threading.
This also allows the soldering to occur before threading.
As always amazing video, always inspiring and entertaining. I always walk away with new knowledge after these videos.
I've only been a machinist for a few months, but what we do when drilling cylindrical parts is use a spot drill bit first to make a dimple or starter hole. Spot drill is a very short and rigid bit that you could still get in the same or similar sizes. The back of the bit is quite a bit thicker than the cutting end, you could possibly even put the spot drill into your old chuck if switching chucks would be easier than cranking in different drill bits. The only other advice I can give is to use some cutting oil. You don't need it so much for preserving your tools, but just placing a small amount where you want the tool to begin cutting may help with resistance and keep that wandering minimal. We're able to place holes precisely into stainless steel cylinders and that's mostly the method we use (besides the machines being CNC).
I read the comments and most addressed the same ideas i was thinking. I would also be interested in seeing a custom nozzle with far more thermal mass and small plate of copper instead of a bar. These are really interesting videos. Well done
Great job Stefan â€ïž
To drill on a Round Part:
1. Find true center.
- Edge Finder or more accurately, Test Dial Indicator
2a. Use Center Drill (small).
2b. Or use small 2 Flute or 3 Flute center cutting Endmill to produce a small "flat spot" before Center Drilling or Drilling.
3. Carefully "peck drill" hole.
4. Flip part 180° and repeat above steps.
5. Deburr if necessary.
Side Note:
- When Reaming remember, a Reamer will follow a drilled hole, straight or not.
- A Bored hole is the utmost accurately machined hole.
Good knowledgeable video! đ
As always, a fantastic video!
Simply brilliant
excellent research!
I can't wait to see your vulcano version.
Neat, I want to try this now.
Great video! I would try to put a piece of thin sheet coper vertically into the nozzle... This would greatly increase the contact surface, without reducing the free cross section.
Amazing performance! To get around the solder limitations, look into ultrasonic welding
This is a really cool idea!!
You might get better flow by using a thin piece of flat stock stuck down the throat of the nozzle, across the diameter. This would give a longer melt length while reducing the frontal area of the obstruction added to the nozzle.
really good stuff! Thanks for sharing!
My thought was the same but with some difference. Design is obvious, glad to see you saw it too. Unfortunately, I'm too busy to check my ideas, but when I make them in metal, I'll let you know.
I'm convinced!!!! Convinced to buy a 3DSolex Matchless Nozzle! đ
Great idea, you could also saw cut a cross in to the nozel and silver solder thin brass plate, keep đ pushing the boundaries
You made us aware of 3D Solex so it is brilliant of them to allow you to release this video
Try drilling the nozzle at 45 degrees to the axis. This will increase the active surface area of the wire inside the nozzle and probably reduce the friction of the filament.
If you use a small single flute countersink to make a dimple in the nozzle threads it will provide a guide point for the drill bit that follows and will prevent it from wandering as you start drilling.
Very interesting. Thank you for sharing with us.
@CNC Kitchen : to center your wire better in the nozzle, proceed in two steps:
1. use your drill press to make a hole on one side of the nozzle ; it might not be centered
2. use a hand drill to make the second hole, adjusting by eye so the drill bit is centered. since you will be drilling through the center of the nozzle, centering will be easy.
and/or
before you make your first hole, use a needle (searching for the french "pointeau" will be easier) to mark where the hole should be.
cheers!
Wow, nice experiment! Today I tested my Garage Volcano CHT - stepped opening, and box cutter blade divider with some optimisations inside. I could extrude 35mm/s without much limit, on a Ti heatbreak (disadvantage for heating). Got just slightly degraded extrusion rate. What was bigger problem was speed. High extrusion rate at slow speed was okay. Same extrusion rate at high speed was bad.
Excellent idea, i might try making on at work no monday .