How to restore the chrome on 60 year old bumpers.
Vložit
- čas přidán 30. 04. 2024
- These bumpers are from a British luxury classic car. They came into us with bad corrosion and were in dire need of chrome restoration. Our video takes you through all of the steps taken to restore these bumpers to their former glory.
The video follows this bumper through all of the stages needed during it's restoration process.
00:00 - Introduction
01:20- Removing the old plating
04:01 - Polishing
13:24 - Copper plating
18:57 - Polishing the copper
23:34 - Nickel and Chrome Plating
27:34 - Final inspection
29:52 - Finished Bumpers
If you need your chrome restoring please contact us:
Marque Restore Chrome Plating
2 Dutton Road
Aldermans Green Industrial Estate
Coventry
Tel - 02476 622 225
Email - sales@marquerestore.co.uk
www.marquerestore.co.uk
CZcams videos:
How to remove dents with hand tools! BSA Motorcycle repair.
• How to remove dents wi...
How to polish Aluminium Harley Side Casings PROFESIONAL POLISHING step by step guide. (Aluminum)
• How to polish Aluminiu...
Polishing Harley Davidson Casings in 3 minutes
• Polishing Harley David...
Golf Club Restoration - How to restore the chrome finish on a set of golf club irons
• Golf Club Restoration ...
How to Restore the Chrome on Titleist Golf Clubs in 3 Minutes
• Chrome Golf Club Resto...
2 Minutes to RESTORE CHROME Bumpers on JAGUAR E-Type XKE
• 2 Minutes to RESTORE C...
Restoring CHROME on a BSA fuel tank. Full length video. How to re chrome a motorcycle petrol tank.
• Restoring CHROME on a ...
90 seconds to RESTORE the CHROME on a MOTORCYCLE FUEL TANK
• 90 seconds to RESTORE ...
1933 Morgan Three Wheeler Radiator POLISH AND NICKEL PLATE
• 1933 Morgan Three Whee...
Restoring 70 year old Allard Chrome
• RESTORING CHROME on 70...
Vintage Lamp from 1927 Motorcycle Restored - Original DULL NICKEL finish or NICKLE in the USA
• How to restore a Vint...
Vauxhall Chrome Bumper Restoration - from very rusty to show chrome
• Vauxhall Chrome Bumper...
Restoring a 1953 Chevrolet Pickup Bumper
• How to restore chrome ...
Restoring the chrome on a 1951 Riley grille
• Restoring the Chrome o...
Restoring (aluminium) Rolls Royce door handles
• Rolls Royce (Aluminium...
Video that shows why you need to pack parcels very securely
• WORST PARCEL DELIVERY ...
Heading West by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/...
~-~~-~~~-~~-~
How to Make your Old Chrome Motorcycle Exhaust Look Like New Again
• How to Restore your Ol...
~-~~-~~~-~~-~ - Auta a dopravní prostředky
I never realized how much work was involved in rechroming a part. These guys are a dying breed.
Thanks
Literally. In the states, the epa is putting a hurting on chrome plating shops as well.
I have always complained about the cost of re-chroming. After watching the staggering amount of labor required for a good finish, I will never complain again.
Thanks for the comment.
Yep. Ninety percent of a good chrome job is in the prep work. The chrome only looks as good as what is underneath it.
No pricing is too high for a set like those - now the real cost is restoring the rest of the car to match.
Sixpackdan, I was just thinking the exact same thing, WOW, I am very impressed ,
@@TheDrOnsberg Absolutely right. You cannot cover up poor prep with plating. It highlights any defects.
Given the chemicals involved, it's evident why this craft is somewhat of a dying art. What incredible attention to detail and fine craftsmanship on display here.
Thanks for the comment
Gosh this takes me back in time and nothing changed. My ole fella had an Electro Plating business in the 70s. I became a metal polisher at 14 yrs skived off school always getting him into trouble. Retired around 10 years ago . Good memorys cold mornings long days.
Me too. Started when I was 19 quit at 40. A tough job combining skills and strength. Watching this I could smell the plating shop and get the taste of the metal dust. :)
Not many of us polishers and platers left now.
Absolutely incredible work there. Thanks for taking to time to show us!
Many thaNKS
A few years back I was able to take a shop tour at Advance Chrome Plating in Nashville Tennessee. I have had a new respect for the work involved ever since. Respect to the chrome platers of the world. You keep our rides gleaming.🙏
Very cool!
An amazing job, very labour intense and a dying art! These guys keep the old vintage vehicle chrome in tip top condition. Let’s hope they keep it going for the next generation to learn!
Gotta have some youngsters interested in it to keep it going. Very hard to find.
Imagine if this shop was in the U.S. The feds at OSHA, EPA and NIOSH would rain down on this perishing art with all the power if Hunter Biden.
Αξίζετε συγχαρητήρια κύριοι ελπίζω αυτή η τέχνη να μην χαθεί.
I am so glad I got to see this video! Decades ago, I was told by an old timer who worked in a body shop that a re-chromed part was actually better than factory new. I always wondered about that until now.
I am certain that factory new would never get the time and attention I just witnessed in this video. Beautiful work.
Great point!
yes for shure , fully agreed
You don't realize. The Factory metal was smooth when stamped. Now they take 80 grit and take out the pits then they go to 120 to take out the grind marks. This company, with this process, will NEVER get you as smooth of a surface as factory. Yes this company pays a huge amount of time grinding out the pits. Just remember the original never had this. I have seen Chip Foose use a grinder way beyond the welds or imperfections. Chrome is like glass. Every scratch or imperfection he, or anyone, now has to be refilled, repolished and brought back to what the factory started with. Look at a stamped piece and at the least it will show some imperfections. Now take 80 grit and see it it helps that Mirror Shine. These guys show the best of the worst ways to show chrome. But just to compare straight across. If you showed all the imperfections across the same square footage... on the hood... of ANY car would you be happy with the chrome bumper finish they JUST showed on ANY show car?
Now I know why chromeplating is so expensive......excellent work and video.
Thank you! Cheers!
Wow.... I never had any idea there were that many steps in restoring chrome. Amazing job...Great video..
I was thinking the same thing
Well they started out with a very bad bumper. How long do you look for a better bumper or pay the price on the bad one?🤔
You guys rock...meticulous craftsmen. In can appreciate this because back around 1970, when all US cars had chrome bumpers, I was an insurance adjuster and after a car was 2-3 years old, all that was allowed on an insurance settlement were 'Re-chromed Bumpers.
As I recall, those re-chromed bumpers were around $100.00~depending on size.....instead of 'new.'
I will note the 'Re-chromers' back in those days were no where near as meticulous as you guys. Some of the 'Rechromes' were pretty rough.
Yes, was much the same here. Chroming is a dying art
As an electrician I had to 'fix' power in a number of chroming shops and I have to say when you walked in the shop it took your breath away, screw environmentalists, you guys deserve a medal.
It's a lot of work and time is money, this is what people NEED to understand, no one works for free.
Also the more complex the shape as on a Jaguar MKII bumper it takes more time, YES I have a MKII that needs both bumpers re-chromed.
So do I AND I AM thinking how much it will cost me? Needs all crome doing DOH!
yes your are right , i am plumber and when we undoing the chalk of boilers ,we used acid and than it be came green of the copper oxide deluded in the acid , i remember days after i could taste the cupper in mine mouth , and i even used the acid to my proper experiences to lay a layer of cupper on iron with a 12 Volt battery , and it works very well , but yes , using a mask would be preferable i think , sorry for my English , i am Dutch speaking ;-)
that was some of the most satisfying 30 minutes I've had...brilliant...you actually made me order new coarse and fine belts 😂
Thanks for showing us the amount of work required to get the pieces looking so beautiful. Great Job!
Happy you enjoyed it
I find myself watching your video again.
I’m polishing cast aluminium at the moment.
All the final buffing techniques are top notch!!
Great work to everyone
Fantastic!
Haha… watching again to let the basic principles sink in.
🇦🇺🤜🏼🤛🏼😎🍀
I had an idea of how it was done but never this in depth. So glad that the Midlands continues to keep these trades and skills alive.
Thanks
Incredible! I love watching metal go from scrap to new, great job fellas.
We had a chrome shop near us. I watched the process in person, but could not see some of the plating baths as the area required PPE, which they would not issue to customers. Your video shows the whole process, start to finish. Unbelievable amount of labor, and attention to detail. Very good work. Cheers!
Thanks
That copper plating alone looks so fresh!
Yes the copper looks great
As General Melchett said to Captain Blackadder, “ Makes you proud to be British”. Damn fine show!
Don't slouch Darling
Quality work mate , nice to see there some of you still around
The labour involved in this work is astounding! I would hate to have to do that hard work out five or more days a week lol. Well done everyone the results are astounding. I should hope that the car owner would be very appreciative of your work. Presumably the Bristol car was being restored, I hope the restoration is up to your standards. If it was then the car will be a wonder to behold!
Thanks for the comments
Wow what a great job i love seeing all the processes in this bumper.
Happy to see craftmanship and quality alive in this age of garbage reproduction we live in. I hope the Queen had a chance to see this fantastic work you're doing.
This was an amazing work. Well done guys. I had no idea it is so intensive and complex.
So satisfying to watch these skilled craftsmen do their job
Fascinating! Thanks for posting!
Wow! That was impressive. Thanks for the comprehensive video. When I left school I was training to be a panel beater removing many rusty old chrome bumpers over the years. I have a lot more respect for them now.......
Thanks for the comment
wow had no idea how complicated and labor intensive a good chrome job was. Thanks for sharing with all of us. Best Wishes & Blessings.
Beautiful work!
Fantastic job guys love watching your videos your brilliant at what you do 👍 i actually rang you today to get my clubs booked in for a refurb ive just bought some mizuno blades but the lady said your on 4 mnth waiting list 🥺 gonna call again shortly to get them booked in for then and look forward to day you finally get your hands on these clubs and get them looking like new 👍.
True craftsmen. Cheers from Sunny South Florida.
Amazing work and hard work too. Thanks for sharing.
Turned out awesome!😊
Hand and eye co-ordination is at an artistic level.
You are right, but this job is nothing compared to the job being polished in our video that is coming out at 5:00pm GMT today. Here is a link. It will be live at 5.
czcams.com/video/pVlG0RtAZ1s/video.html
It's amazing how someone came up with this process
Wow watching that process was really kool...Good job guy's.
beautiful work... thank you
As with painting, it's all in the preparation.
Very interesting video.
I never knew how much work goes into this art form! Enjoyed the video!
Glad you enjoyed it!
Wow that's some serious high standards, better than the factory for sure, beautiful work
Very beautiful job, god bless!!
Ahh, nothing like the smell of plating in the morning. People wonder why its so expensive to chrome plate things. Lots of hard and dirty work going on right here! Great job guys!
This transformation would totally exceed my requirements by a country mile.
Beyond Perfectionism ...
I also complained about the cost of chroming things but this amount of labor is tremendous and have a better understanding now and will keep my mouth shut when I get something chromed in the future. Thanks for showing us what goes on to have something plated~!
Excellent work
Great video. I love watching craftsmen with the right tools restoring past items back to possibly a bettwe condition that it originally was.
I hope your are training the younder generation. It would be a real shame to let this trade die.
Just amazed
Excellent👍💯 work.
Awesome work.
Amazing to see the restoration looks amazing 👏
Thank you very much!
Very nicely done. Well explained
great job
Thank you, a very informative video, so labour intensive and so many different steps. Amazing work, congratulations 👍
Our pleasure!
Top notch work. No mot was harmed in the course of this video...
Brilliant great to watch and see how it's done lot work involved and audio crystal clear 10/10 great stuff 😊
Glad you enjoyed it
Very NICE WORK
Great job!
An amazing process, bravo guys!!
Thanks
This was beyond impressive!!
Many thanks
I used to work in a printed circuit factory. I was the lab tech and nickel-gold line operator. . So I found this video most fascinating.
Thanks. Same materials different produce.
I just saw I wrote lad tech. I meant LAB tech. I corrected it. I would love it if you did a tour round your lab.@@ChromeandCarRestoration
Amazing work.
Glad you think so!
Brilliant job nice
To perfection,.....Bravo,.....
Looks amazing, so impressed. thanks for making the video
Thanks for watching!
WOW, what a process. Very detailed and very nice work
Thank you very much!
An absolutely fantastic job, no two ways about it. However, when I saw the title for this video where it says "restore", I had my doubts. After watching the video, I would call it "re-chrome" or "re-plate" or something like it. Never the less, I am speechless!
Wow . Wow . Wow
Amazing work
This is the first time I watched a very long video to the end
It's more than a satisfying, interesting and a mesmerising result.
Awesome video guys!
Excellent. Job
I’m impressed with your job. Can you make a video what is exactly in tanks and how they work. 👍🏻👍🏻
Wow you do Amazing work!! I never knew what was involved in the process! Worth every penny you charge!
Thanks for the positive comment.
Amazing!!!!!
awesome... i have a w111 coupe 1962.... must have that done on my bumpers too...
Perfect work!👍
Thanks
very impressive
Wow just an incredible amount of work and time and equipment to restore these chrome bumpers and items. Much respect. Great video.
Much appreciated!
Very interesting. Always heard there was multiple layers involved in Chrome plating. I've also been told I have to watch because there's a shortcut so I can be done it looks fine but it won't look that away too long. Thanks for showing us this process.
nickel chrome only, but doing the copper cyanide then acid copper is the best job you can do
Thank you for sharing.
My pleaseure.
I had no idea what it takes to achieve the beautiful finish of chrome . Great video!
Glad you liked it!
Excellent !
Many thanks!
Amazing 👍💪👏
Wow who ever new,!! Great job to all of those guys!! 👍💯
Thanks
Great work
Thank you! Cheers!
Better than new, good for another 1000 years! Amazing job!
Thanks
Awesome job 👏 👍🏿 🙌
Thank you! 😊
GREAT RESULTS MATES!!!
Thanks
Thoroughly enjoyed this, thanks for making it! I have taught myself copper and nickel plating (watts bath) and hot caustic bluing, rust bluing etc, and as you have shown its 99% hard work doing preparation and 1% dipping in chemicals. I have a wonderful old english book 'Metal Colouring by David Fishlock' and its great to see this knowledge is still kept alive in practice. Hope to see more great videos like this, so I continue to learn. Regards from Tasmania.
Thanks for the kind comments, glad you enjoyed it.
Wow incredible attention to detail, great job.
Back when I started working in a crash shop as a teenager most cars on the road still had chrome bars etc. and we could order change over bars from a local shop for most models. We would take off the old bars and do any repairs they needed like welding cracks and removing dents and swap them over for freshly chromed ones they had in stock. I don’t think they were as meticulous with the prep though, I would sometimes see grinder marks in areas you wouldn’t easily see when it’s on the car. But they were doing hundreds of them and they weren’t for restorations, just everyday aussie cars that only needed to be as good as they came from the factory 😂
Woow, extremely interesting.
Now I understand the price bracket 👍
One of the most interesting videos I have seen on CZcams, thank you 👏🏻👏🏻👏🏻
Glad you liked it!
Good Job .... Thanks for the interesting video
Nice work.
Thanks!
Thank, you for you're video.
Our pleasure!
Beautiful work .. Well Done
Thanks a lot 😊
Wow wow wow looks fantastic lad’s amazing. You really do turn back the clock 😮😳😜😁👍brilliant process and superb video. 🤩🤩🤩🤩🤩🤩🤩yep you can certainly deserve 5 ⭐️⭐️⭐️⭐️⭐️
Great job, thank you!
We use a little bit different "sandwich" sequence in gravure printing industry.
Wow!!
I wish I had your equipment oh the fun I would have. Cheers
Geweldig !!!