CareerVidz I got B for Question 8 and cannot understand why A Is the correct answer. As the further out you have the third arm it mean it’s going to put more weight back into the wall. Please explain this one so I don’t understand. Because if you put the weight on the further part of the ledge then it’ll just buckle...
for the exercises with gears, and determinate the rotacion, there a very simple way to do it: if there is mechanism with ODD number of gears, the final gear will turn to the same direction than the driver gear, if is PAIR, is always going to rotate in the opposite direction. hope it helps, regards
If there are an even number of wheels spinning whichever cog is last well spin in the opposite direction. Conversely, if there is an odd number of wheels, the last and the first will spin in the same direction.
for Q5 the beam is longer on the right side so C is eliminated as X is heavier than Z.. B is eliminated because it is the same distance from the fulcrum as weight Z ... i saw you say that A is incorrect, but it seems to be the only plausible answer
Would help if you put the answers in the description/as a pinned comment mate considering you’ve literally called the videos questions and answers not questions and guess in the comments
The answers are in the video. They’re visual questions. Posting questions answers in a pinned comment wouldn’t do anything to give you any insight into these questions. Perhaps you should start in a reading comprehension course prior to jumping right into this?
@@JeremiahLutherPritchett the “your turn” questions at the end tell you to put your answer in the comments and don’t reveal the answers. He says he will reply to comments marking the answers but he doesn’t
Overall it’s A. Just imagine trying to drag that thing with a rope around the base VS a rope tied to the top. Far easier to tip that thing IMO with A. due to the leverage. Just my thoughts on a general perspective.
There is no need to turn on any switches, as the power source is before the first bulb, making all the bulbs on all the time. And if the vertical lines, at the top, are not the power source, then this question can't be answered do to no power source. What side is the power source on?
@@buildingtrades7070 The circuit is open if you don't close the top switch AND any of the bottom 3 (current cannot return to the negative terminal) and the bulbs will not turn on
This is where it's important to understand the subtleties of american and british english term and standard measurements like imperial and metric. As Canadian we usually have to know both systems, wording and conversion. It's a real headache.
I have a mechanical aptitude test for a job I'm appling too this week. This video really help me!! The comments below help with ladder question and balance triangle question.
Number 5 should be A, because it’s given that there are 3 spots for the weight to go, and assuming z is on the end of the scale, 2 spots over would be X, so it’s like; Z Y X ^ X Y Z , with the arrow in the middle being the center of the beam
Q5) I'd say C. Just because the question doesn't give any information on the weights or the length of the lever. You'd really have to assume they're the same weight in different shapes, given it's a first class lever.
Question 8 =B because if a load is placed at the ending of A there will be a serious bending moment [force] because A lacks support at it’s end unlike B
@@theajanakus here’s a pickup line for a mechanical engineer. “The spark between u and me could start a jet engine”. Of course a little spark is enough but it woks.
I like how they throw the height of the building at 30 to confuse you. I have reading comprehension problem and so I got the height of the building and working height mixed up. I'm glad i read your answer because I would have said 10, because I'm dumb. Lol
@ Cadi Dreamer, Yet you're not done? Now, after your calculation, at what distance away need the ladder to be pitched? 21meters - 7 meters (1/3 of the working height away) = 14 meters. Therefore, the ladder should be pitched at 14 meters. Q/12= "C) 14 meter"
Thank you for your answers. Other than Q5 and 9 your answers are correct. Please would you subscribe to my channel? I'd appreciate your support. Thanks!
For Answer 6: Answer will be 2 switches we have to close as given in the video. Explanation: It's a basic rule. If you need to light up the bulb, you need a complete close circuit. If you close only one switch, it won't give you a complete circuit. One needs at least 2 switches to be turned off to light the bulb.
Will King If you take 21 meters as working height and move the ladder 7 meters away the worker can not reach to the working height because the ladder will reach 21-7=15 ish meter...but if u take 30 meters as working height and move it 30/3=9 meters away the worker will reach to the 21 meter(working height)
braedon billingsley yes,21 metres becomes the working height after moving the ladder to a safe distance,you have to calculate it taking 30 meter as working height
Thank you for replying and providing this video. I am not sure if I am mechanically inclined , but I will not know if I don’t try. Have a wonderful day.
I am glad you're enjoying the videos! :) Your answer is correct! Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!
Question 5 isn’t fair because you don’t know the ratio of the sizes nor the weight so most logical guesses would be A. B would be the second guess but it’s impossible to be right without knowing the weights or ratio of weights. Also on question 10 when you word it with pull the mass object over with, my first instinct was C due to the fact I thought you meant horizontally. A is the obvious answer if you are trying to “tip” it over or rotate it. If you could edit this video and make it a bit clearer it would really help.
2. Clockwise 5. We need more info. It can't be C because the heavier weight will shift to the floor while the lighter weight will be in the air. But it is unclear how much heavier the weight is than the left one. The heavier the weight, the further in toward the center it will need to be placed. Therefore, I will say A however, it could also be B if it's not quite that heavy. 8. B 11. B 12. A
CareerVidz why would the answer be - B you said x weighs more so putting it on - B would unbalance the scale so therefore putting it on - A would be the correct answer
Please about the question 2 what happen to the other cog, because I thought after cog B turned anticlockwise the other cog will turn clockwise then cog A will turn anticlockwise but I’ve seen people commenting that cog A will turn clockwise and you’re marking them correct.. can you please explain to me how these cogs work ??
no u know a little more about pendulums u would know that time period =2pi x underroot of lenght / effective gravity so according to that time is directly propotional to lenght of string or rod whatever . so which ever has least time will be more fast so the ans is d
Thank you for your answers. All correct apart from Q3 and 7. Well done. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊
Thank you for the tests. I'm sure it is different for US metrics but here goes my answers: Q.2: A will turn Clockwise Q.5: I will submit my answer a B since it may equalize out the difference Q.8: B, heavier the Support the more stability for the Load Q.11: B; if my mind is picturing this right than B should be correct. Q.12: This one stumped me so I will Go with A. I feel C. is correct so I don't know.
Where on the video does it shoe that X weights more than Z. Assuming just get people killed. Aptitude test need to be more clear on its questions and drawings, in order for it to be a far test. But to your answer, you would be wright, assuming X weights more than Z.
Q5. There can be no answer without knowing how much z or x weighs.. because picture lines can be deceiving in height or width...how much heavier is x to z ...the answer could be ..A or B or it could be in-between A and B ...maybe just B🤷🏿♂️🤦🏾♂️
1 anti 2 clockwise 3 D 4 smaller one 5 A 6 2 or 0 7 left 8 no idea ..A? 9 y 10 drag over or tilt over? 11 the two connected to the one that 4 is turning 12 7
Hello 👋🏾👋🏾 My answers Q1: Y anti clockwise Q2: A clockwise Q3: D is faster Q4: B will turn more Q5: A because X is heavier & will balance the middle more Q6: Top & Bottom (I got it right 💃🏽) Q7: Y to the left Q8: A can carry the heavier load Q9: X 🥺 (I saw answer Y) Q10: A Q11: 1 & 3 Q12: 7
I took the defence aptitude test and failed first time, now I’m going to use these guides to practise and then retake the test and hopefully pass on the second time. Don’t be disheartened! 💪💪💪
You can do it mate. Just relaxand study for 20 minutes a day. I served in the Navy as a STOKER. Translates toa Special class mechanical fitter theses days. I had to learn algebra, geometry and trig at the ripe old age of 29. These days i love testing my metal and IQ/aptitude.
Where are the answers to the questions he made us write in our notes ??? That’s irritating because I would like to know how I’m right or wrong if you’re going to have us write answers in the first place . You’re making it seem as if you’re going to give us the answer at the end so we can correct ourselves. That was very annoying .
Take another look at Q8 and see if you can get B as the correct answer. Give Q11 another look over and see if you can get B as the correct answer. Take a quick look at Q12 again and see if you can get the correct answer of A
I think you're wrong I think pendulum A will swing faster, the bar is up high yes but it's too close to the pendulum weight, obviously for perfect performance the weight should be below the bar. But we really don't know what type of pendulum it is & theoretically it could swing upside down, looking at yours D if the bar is the hinge how is it going to be faster against A?
Just finished my firefighter online tests today, including the mechanical ability test. Got your book on joining the fire service and it was great and helped so much! Any idea on how they might be grading the test? At a guess I got between 70 and 80 percent correct. Many thanks
My answer is A because the point of c is not at distance like z But B is at distance but the weight of x is more than z so A is the correct answer because at the pount of A it will be equal in weight to each other .
Q6 the real answer is "none", because requirement is that you need ONE bulb, not two, to light up. This question puts a dilema into the reader's head of either limiting yourself to the question or pretending to "think outside the box". Since we talk precision here I'll stick with the question. ps.: they could have formulated it as "at least one light bulb" then it would be fine, too easy though, but fine.
Thank you for your answers. Q2 and 12 are correct, but the others are not. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊
Get FREE Mechanical TESTS at www.how2become.com/mechanical-comprehension-tests/
CareerVidz I got B for Question 8 and cannot understand why A Is the correct answer. As the further out you have the third arm it mean it’s going to put more weight back into the wall.
Please explain this one so I don’t understand.
Because if you put the weight on the further part of the ledge then it’ll just buckle...
plz ansr for q8
Hello this link wont work
Stop making videos if you don't know the answers yourself. You're not helping by doing that, just pissing people off.
@@Itsamitroy a
Q2: Cog a will turn clockwise
for the exercises with gears, and determinate the rotacion, there a very simple way to do it: if there is mechanism with ODD number of gears, the final gear will turn to the same direction than the driver gear, if is PAIR, is always going to rotate in the opposite direction. hope it helps, regards
Thank you so much sweetie! Anymore lesson's like this???
thanks @@saundraraquel8206 for your lovely answer, i'm not a teacher, i'm engineer, but yes if you have more question i would love to help, 🙂
If there are an even number of wheels spinning whichever cog is last well spin in the opposite direction. Conversely, if there is an odd number of wheels, the last and the first will spin in the same direction.
Does that add up with Q11.?
Sir,
I really appreciate the time you spend to help us by posting these videos.
Hey, thanks for your kind words - they mean alot! :)
for Q5 the beam is longer on the right side so C is eliminated as X is heavier than Z.. B is eliminated because it is the same distance from the fulcrum as weight Z ... i saw you say that A is incorrect, but it seems to be the only plausible answer
Appreciate you Big Homey!!!
I appreciate that
Lol
Would help if you put the answers in the description/as a pinned comment mate considering you’ve literally called the videos questions and answers not questions and guess in the comments
Hv u appeared for Indeed mechanical assessment test??
The answers are in the video. They’re visual questions. Posting questions answers in a pinned comment wouldn’t do anything to give you any insight into these questions.
Perhaps you should start in a reading comprehension course prior to jumping right into this?
@@JeremiahLutherPritchett the “your turn” questions at the end tell you to put your answer in the comments and don’t reveal the answers. He says he will reply to comments marking the answers but he doesn’t
@@elisehopkins9260 I agree with you but just because you're cute
Q5: either A or B. I’m inclined to say B, but it’s hard to say because I don’t know the exact forces and distances to sum the moments.
I also think its b because. a is to close to the triangle that it will slide
I say A because there’s better support in the center.
It’s A because there is 3 spots, x y z, z is at the far end , y in the middle, and x should be closest to the the balance point
5 is A
Overall it’s A. Just imagine trying to drag that thing with a rope around the base VS a rope tied to the top. Far easier to tip that thing IMO with A. due to the leverage. Just my thoughts on a general perspective.
These are super simple, I’ve never encountered questions as simple as these on mechanical aptitude tests bar the cog direction ones
I thought Q6 was a trick question. Its impossible to just light up ONE bulb.
I felt the same on that one
There is no need to turn on any switches, as the power source is before the first bulb, making all the bulbs on all the time. And if the vertical lines, at the top, are not the power source, then this question can't be answered do to no power source. What side is the power source on?
@@buildingtrades7070 The circuit is open if you don't close the top switch AND any of the bottom 3 (current cannot return to the negative terminal) and the bulbs will not turn on
Do you know how a practical test as part of an interview for a mechanic would go. Like what questions would come at you ? Please
In the US, "anti-clockwise" is almost always referred to as "counter-clockwise". Just an FYI.
I was wondering why that phrase kept pinging in my head lol
This is where it's important to understand the subtleties of american and british english term and standard measurements like imperial and metric. As Canadian we usually have to know both systems, wording and conversion. It's a real headache.
Q11: 1,3
I have a mechanical aptitude test for a job I'm appling too this week. This video really help me!! The comments below help with ladder question and balance triangle question.
Hope you got that job💪🏾
Same here dude I got 2 weeks until my test!hope you got your job!
Lucky it’s not a spelling test😂
@@adamwuksta3255😂 i came here to say that. Good thing they aren’t testing him on English
I really appreciate the mechanical knowledge you included in these videos
❤️
Number 5 should be A, because it’s given that there are 3 spots for the weight to go, and assuming z is on the end of the scale, 2 spots over would be X, so it’s like; Z Y X ^ X Y Z , with the arrow in the middle being the center of the beam
If I’m wrong I give up 😂😂😂😂
That’s exactly the reasoning I was thinking…. Do you perhaps know the answer now at this time 2 years later lol
Q5) I'd say C. Just because the question doesn't give any information on the weights or the length of the lever. You'd really have to assume they're the same weight in different shapes, given it's a first class lever.
Well the instructor says that X is heavier
What is the answer to question 5? A,B, or C?
2. Clockwise 3.D 4.B 5.B 6.2 7. Moves to the left 8.B 9.Y 10.A 11.B 12.E
Hi, thank you for your answers to this video. 10 out of 11 here, good job! Take another look at Q12 and see if you can get A as the correct answer.
@@CareerVidz yes A is the answer
@@CareerVidz how 11th is b
If there are even number of gears then there will always be a reverse and if odd number of gears then same turn direction
What???
I dont like this because of that put your answer and the comment, Im sorry just saying
It's yo boy Blizzy , I agree, at very least respond to those which have posted answers to confirm they are correct or incorrect?
Thanks best video help full
Me too really time consuming please answer it as we go 😐
Why you gotta knock the hustle
Same
Q.2) A
Q.5) B
Q.8) A
Q.11) B
Q.12) 7m (A)
Great vids, many thanks!
Great answers and I'm really pleased you have found it useful :)
Thanks,
Richard
@@CareerVidz Did he get Question 5 wrong?
@@brycering5989 I also got an answer of A for question 5 assuming that point B is an equal distance to the center.
@@brycering5989 Whoa, that's a really fast response during the holidays. Thanks for your dedication to learning.
@@CareerVidz what about Q8 i got B can explain why is A if its correct
Question 8 =B because if a load is placed at the ending of A there will be a serious bending moment [force] because A lacks support at it’s end unlike B
Well done! Your answer is correct :)
Please would you subscribe to my channel? I'd appreciate your support. Thanks!
Why would people put a load at the tip?
@@rafaelmenna8384 User experience 😆
@@theajanakus here’s a pickup line for a mechanical engineer. “The spark between u and me could start a jet engine”.
Of course a little spark is enough but it woks.
Using this as practice for my OAR exam this week!
Q:8 b, because the weight is distributed over a larger surface
Q12 Answer is A.
A third of the working height. The working height is 21 meters..... a third of 21 meters.....21/3....=7.....7 meters.
I like how they throw the height of the building at 30 to confuse you. I have reading comprehension problem and so I got the height of the building and working height mixed up. I'm glad i read your answer because I would have said 10, because I'm dumb. Lol
@ Cadi Dreamer, Yet you're not done? Now, after your calculation, at what distance away need the ladder to be pitched? 21meters - 7 meters (1/3 of the working height away) = 14 meters. Therefore, the ladder should be pitched at 14 meters. Q/12= "C) 14 meter"
@@DICKOKASONGO 14 meters is 2/3
you hurt my head
DICKO KASONGO the answer is 7 being one third of 21
2.counterclockwise
3.D
4.B
5.A
6.2
7. left
8.B
9.
10.A
11. 1&3
Thank you for your answers. Other than Q5 and 9 your answers are correct. Please would you subscribe to my channel? I'd appreciate your support. Thanks!
seriously, if you dont know which way the hands turn on a clock i dont think you should be looking for a job in the military!!
I just thought that lol
1. counterclockwise 2. clockwise 3. d 4.b 5.b 6. ? 7. left 8. b 9. ? 10. A 11. B 12. A
For Answer 6: Answer will be 2 switches we have to close as given in the video.
Explanation: It's a basic rule. If you need to light up the bulb, you need a complete close circuit. If you close only one switch, it won't give you a complete circuit. One needs at least 2 switches to be turned off to light the bulb.
1. anti clockwise
2. clockwise
3. D
4. B
5. A
6. 2
7. left
8. B
9. Y
10. A
11. B
12 A
pls mark
Please explain last one
Working height is 21 meters. 1/3 of 21 is 7 meters.
Will King If you take 21 meters as working height and move the ladder 7 meters away the worker can not reach to the working height because the ladder will reach 21-7=15 ish meter...but if u take 30 meters as working height and move it 30/3=9 meters away the worker will reach to the 21 meter(working height)
@@avinandanmondal9550 it states that working height is 21m not 30m (height of building)
braedon billingsley yes,21 metres becomes the working height after moving the ladder to a safe distance,you have to calculate it taking 30 meter as working height
Q2: Cog A will turn clockwise.. Q5: Will balance at point B... Q8: I think its B? Q11: 1&3, Q12: 7 metres. Definitely enjoyed this vid :)
Glad you enjoyed the video Curtis, you've got these all correct, brilliant answers!
@@CareerVidz how is question 12 A (7? Also is question 5 answer B?
can you kindly explain why 11 is B
That’s great that’s all the answers I got too!
Can someone please explain Q11 for me😩 how is it 1&3, how does these cogs works please
Q2 clockwise, Q5 B, Q8 B, Q10 clockwise, Q12 A
How did u get the answer for the 12th qstn
1.Counter
2.Clockwise
3.D
4.B
5.A
6.2
7.Left
8.B
9.Y
10.A
11.B
12.A or 7 meters
Why not B for 5th question?
Thank you! Great and very helpful video, I appreciate your efforts :D!!
Thank you for replying and providing this video. I am not sure if I am mechanically inclined , but I will not know if I don’t try. Have a wonderful day.
I truly appreciate your hep sir!! Your a gift and in glad i found your channel!
Q2:Clockwise
I am glad you're enjoying the videos! :) Your answer is correct! Well done.
Please would you subscribe to my channel? I'd appreciate your support. Thanks!
Q11 B
I wish this came easier to me like it does to others but I struggle with this stuff 😂
Ok me too,,,
Same
Same here
1Cog a turns clock wise
5a
8b
9
11b
12b
sir qs no 9 We can see if water is putting from point z to y so first X will be fill after that y will me Full
QUESTION 12 IS A7
Pluto Zerogang
Yap dude the same answer goes for me too
1-acw,2cw,3d,4b,5a,62,7l,8b,9y10a,11b,12a
2. Clockwise
5. B
8. B
11. B
12. 7
You got all of those correct Neil! How's about you give the other questions a go?
@@CareerVidz what's the correct answer for Q8?
The free book download doesn't work it says I have pay for it
Question 5 isn’t fair because you don’t know the ratio of the sizes nor the weight so most logical guesses would be A. B would be the second guess but it’s impossible to be right without knowing the weights or ratio of weights. Also on question 10 when you word it with pull the mass object over with, my first instinct was C due to the fact I thought you meant horizontally. A is the obvious answer if you are trying to “tip” it over or rotate it. If you could edit this video and make it a bit clearer it would really help.
I believe if no weight is giving you use the principle of going farther away from the fulcrum to even it out.
2. Clockwise
5. We need more info. It can't be C because the heavier weight will shift to the floor while the lighter weight will be in the air. But it is unclear how much heavier the weight is than the left one. The heavier the weight, the further in toward the center it will need to be placed. Therefore, I will say A however, it could also be B if it's not quite that heavy.
8. B
11. B
12. A
q5 exactly! All to do with leverage and weight.
question 12 :
if the working height is 21 m high then 1\3rd of that will be 7m
For question 5. The answer is B because the weight difference will balance the weight.
B is the correct answer to Q5, good work!
Q2) Clockwise
Q5) A
Q8) B
Q11) B
Q12) A
Thanks Leon :)
my answer are : Q1 - Anti-Clockwise, Q2- clockwise, Q3 - D, Q4 - Cog B more turn, Q5 - B, Q6-2 switches, Q7-Left, Q8 - B, Q9-Y, Q10-A, Q11- B (1 & 3), Q12 - 7
Hi, Thank you for your answers to this video. 6 out of 7 here, good job! Take another look at Q5 and see if you can get B as the correct answer.
CareerVidz why would the answer be - B you said x weighs more so putting it on - B would unbalance the scale so therefore putting it on - A would be the correct answer
Marshall it’s definitely not C but A or B could be correct, we don’t actual know the weight so how can anyone say which is correct
Did you divide by 3 for question 12 right?
Please about the question 2 what happen to the other cog, because I thought after cog B turned anticlockwise the other cog will turn clockwise then cog A will turn anticlockwise but I’ve seen people commenting that cog A will turn clockwise and you’re marking them correct.. can you please explain to me how these cogs work ??
2) clockwise
5) B
6) B
11) B
12) B
Hi Yashu! You got 4/5. Check your answer to question 12 again and let me know what you get :)
This was a great help for me
Thanks Raymond, I am pleased you found it useful :)
Point A for the lever question on where to place weight X
Q3 can be solved in 2 ways:
1. Top speed (A would win)
2. Time to a point (D would win)
no u know a little more about pendulums u would know that time period =2pi x underroot of lenght / effective gravity so according to that time is directly propotional to lenght of string or rod whatever . so which ever has least time will be more fast so the ans is d
I agree with you, I think the question is formulated wrong, they should have asked about cycle or revolution.
Q12 D 3meters
Sorry this is incorrect.
2-Clockwise
5- A
8- B
11-B
12-A
These are okay?
HI, Thank you for your answers to these questions. 4 out of 5 here, good job! Take another look at Q5 and see if you can get B as the correct answer.
nooo he's right on number 5
aint it supposed to be on A?
@@CareerVidz Seems like a guessing game without the actual weight of the blocks and length of the beam? Anyways, thanks for the video.
@@CareerVidz But B would make X & Z equidistant from fulcrum? Therefore, must be A because cannot be C, or B.
whats the answer to question 8 and why?
@Neil Yang Domenden Can you explain why? A makes more sense to me
this is cool! never done this before. finish this test then go off and make your mechanical invention!!!!
Q2: Clockwise
Q3: a
Q4: b
Q5:b
Q6: ?
Q7: right (i miss looked)
Q8: b
Q9: Y
Q10: a
Q11: B
Q12: 7 METERS
believe i got 10 out of 12?
Thank you for your answers. All correct apart from Q3 and 7. Well done. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊
Thank you for the tests.
I'm sure it is different for US metrics but here goes my answers:
Q.2: A will turn Clockwise
Q.5: I will submit my answer a B since it may equalize out the difference
Q.8: B, heavier the Support the more stability for the Load
Q.11: B; if my mind is picturing this right than B should be correct.
Q.12: This one stumped me so I will Go with A. I feel C. is correct so I don't know.
rip us metrics
l agree with your answers but I feel like Q12 is E, I'm going based on the numbers it gave us and work my way from there
The question 12 tries to confuse you. But if you read it through you can understand it. The answer is A
shelf B
1# Counter clockwise/anti clockwise
2# Closkwise
3# A
4# B
5# B
6# 2
7# Left
8# B
9# Y
10# A
11# B
12# ??
I am a commercial & industrial heating and ventilation engineer also known as a pipe fitter welder
Q,2= A CW
Q.8= B
Q.11= Cog 1,2 Cw
Cog 3 A-CW
Q,12= 7
can you please explain why you answered 8 as B and not A ??
Heyp.......You Are Going Good With Your Channel...... Thank you for your efforts 👍👍👍🙏🙏
Q5 B
1. Anti
2 clock
3 D
4 B
5 B
6 2
7 left
8 B
9 Y
10 A
11 C
12 B
Hello 😊good evening.. do you have a video of how to choose the object that is represented by the three-view drawings? ..
Thank you and god bless
Question 5 options A bez the weight of x is more than weight of Z so weight of x is near the certal axis
Where on the video does it shoe that X weights more than Z. Assuming just get people killed. Aptitude test need to be more clear on its questions and drawings, in order for it to be a far test. But to your answer, you would be wright, assuming X weights more than Z.
Q5. There can be no answer without knowing how much z or x weighs.. because picture lines can be deceiving in height or width...how much heavier is x to z ...the answer could be ..A or B or it could be in-between A and B ...maybe just B🤷🏿♂️🤦🏾♂️
Shelve B can carry the heaviest load
1 anti
2 clockwise
3 D
4 smaller one
5 A
6 2 or 0
7 left
8 no idea ..A?
9 y
10 drag over or tilt over?
11 the two connected to the one that 4 is turning
12 7
Q.2 clockwise
Q.5 A
Q.8 A
Q.11 1 and 3
Q.12 A
I think we apperciate as well right answers @ career vidz . you are just writing appreciations ??
wouldn't Q.8 be "B"?
MegaMopar4406 yeah I think so.... Because the edge of A will eventually crack.
Great video thank you so much
Thank you for your kind words and I am please you found the video useful :)
Anti-clockwise
Question 8 shelves B eg formula 1 ankle bar push rod
You are correct. Perfect! Please would you subscribe to my channel? I'd appreciate your support. Thanks!
Question 5 answer is at B, because the weight will create a couple but at B the couple will be balanced
Initially thought that as well because he didn't state weights, but then says X is heavier, so it is "A"
Question 2, is Clockwise, Question 5. Question 5 is A and question 8 is B
Thanks for this video. it is very helpful. :)
Why not B for 5th question?
Optimus prime I agree
X is heavier, B would be at equal leverage from Z. So it must be "A"
Hello 👋🏾👋🏾 My answers
Q1: Y anti clockwise
Q2: A clockwise
Q3: D is faster
Q4: B will turn more
Q5: A because X is heavier & will balance the middle more
Q6: Top & Bottom (I got it right 💃🏽)
Q7: Y to the left
Q8: A can carry the heavier load
Q9: X 🥺 (I saw answer Y)
Q10: A
Q11: 1 & 3
Q12: 7
Hi! Thank you for your engagement! I am happy to say that you got most of these correct!😊 Would you like to try Q5 and 8 again?
Q9 is indeed Y😉
@@CareerVidz how 8th is b
Thank you for your immediate answer
Y will also move left
I took the defence aptitude test and failed first time, now I’m going to use these guides to practise and then retake the test and hopefully pass on the second time. Don’t be disheartened! 💪💪💪
You got this! Please would you subscribe to my channel? I'd appreciate your support. Thanks!
I passed but didn’t get the role I wanted because of the mechanical bit. Good luck mate
You can do it mate. Just relaxand study for 20 minutes a day. I served in the Navy as a STOKER. Translates toa Special class mechanical fitter theses days. I had to learn algebra, geometry and trig at the ripe old age of 29. These days i love testing my metal and IQ/aptitude.
Q5 point A cause more resistance less arm
Thanks
Where are the answers to the questions he made us write in our notes ??? That’s irritating because I would like to know how I’m right or wrong if you’re going to have us write answers in the first place . You’re making it seem as if you’re going to give us the answer at the end so we can correct ourselves. That was very annoying .
Q2.Clockwise
Q5.B
Q8.A
Q11.C
Q12.E
Take another look at Q8 and see if you can get B as the correct answer. Give Q11 another look over and see if you can get B as the correct answer. Take a quick look at Q12 again and see if you can get the correct answer of A
AHHHHH! Give the answers . . . or at least put them at the end . . .
Hi Laura, if you write your answers in the comments I'll mark them for you :)
yea this is lame
@@CareerVidz is it A
Yea but we're here for the answers and to learn lol not to leave comments and have a conversation about it
cog 1 &3
I think you're wrong I think pendulum A will swing faster, the bar is up high yes but it's too close to the pendulum weight, obviously for perfect performance the weight should be below the bar. But we really don't know what type of pendulum it is & theoretically it could swing upside down, looking at yours D if the bar is the hinge how is it going to be faster against A?
Will this prepare you for the Amazon Ramsay mechanical aptitude test ?
I have a digital clock😫
This is just what I need
TY for your Time
Thanks Raymond
Can I get rest of the answers ??
All my clocks are digital.
Same
Michael Naisbitt that's why they are not wise enough
Flush and find out
Just finished my firefighter online tests today, including the mechanical ability test. Got your book on joining the fire service and it was great and helped so much! Any idea on how they might be grading the test? At a guess I got between 70 and 80 percent correct. Many thanks
I’m just about to set the test for my fire fighting
My answer is A because the point of c is not at distance like z But B is at distance but the weight of x is more than z so A is the correct answer because at the pount of A it will be equal in weight to each other .
you are wrong for question 12. it is a 1 to 4 ratio in osha guidelines for ladders
Q12. The answer is 7 metres. Thanks great teacher
Q6 the real answer is "none", because requirement is that you need ONE bulb, not two, to light up.
This question puts a dilema into the reader's head of either limiting yourself to the question or pretending to "think outside the box". Since we talk precision here I'll stick with the question.
ps.: they could have formulated it as "at least one light bulb" then it would be fine, too easy though, but fine.
Q2) Clockwise Q5) A Q8) A Q10) B Q12) 7 meters
Thank you for your answers. Q2 and 12 are correct, but the others are not. Would you like to subscribe to my channel so you don't miss out on any new content? Your support will be highly appreciated!😊
Q2. clockwise, Q5. B, Q8.B, Q11.B, Q12. E,
Thank you for your answers. All correct apart from Q12 which is not E?