100% The Worlds Best BUDGET RC Car !! (UNDISPUTED) - MJX Hyper Go Brushless
Vložit
- čas přidán 31. 07. 2024
- We have found the worlds best BUDGET RC Car the MJX Hyper Go, without doubt this is the best RC car we have ever tested.
Monster Truck: www.banggood.com/custlink/3K3...
Buggy: www.banggood.com/custlink/GmK...
Truggy: www.banggood.com/custlink/vmG...
❤IF YOU WOULD LIKE TO SUPPORT THE CHANNEL: paypal.me/davidlee1345?locale...
🚀 MERCH: hardcorerc.creator-spring.com/
👀FACEBOOK: / hardcorerc-10910420087...
Recommended items:
25kg Servo: www.banggood.com/custlink/3DK...
GPS SKYRC GSM020 Performance Analyzer: www.banggood.com/custlink/Gv3...
Chargers:
Hota S6: uk.banggood.com/custlink/vm3y...
HTRC T240 DUO: www.banggood.com/custlink/33K...
HTRC DOU 400: www.banggood.com/custlink/33v...
Fans:
30mm: www.banggood.com/custlink/m3K...
35mm: uk.banggood.com/custlink/3DmE...
40mm: www.banggood.com/custlink/KKG...
Transmitters:
Flysky NB4: www.banggood.com/custlink/G33...
FlySky FGr4P Receiver: www.banggood.com/custlink/vGD...
Flysky FGr4S Receiver: www.banggood.com/custlink/vmv...
Flysky FGR4 Receiver: www.banggood.com/custlink/Dmv...
FGR4B: uk.banggood.com/custlink/vK3h...
FGr8B: uk.banggood.com/custlink/m3vY...
FTr10: www.banggood.com/custlink/mKK...
FGr12B: uk.banggood.com/custlink/33vd...
Low Cost excellent transmitters:
DumboRC X6 2.4G 6CH Transmitter: www.banggood.com/custlink/KvK...
Flysky GT3C: www.banggood.com/custlink/G3K...
FlySky FS-GT5: www.banggood.com/custlink/mGD...
#HardcoreRC #rccars #rc #arrma #arrmarc #ARRMAHOF
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission from the retailer. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Get your MJX Hyper Go Brushless cars from here:
Monster Truck: www.banggood.com/custlink/3K3WCyWmad
Buggy: www.banggood.com/custlink/GmKWJycKoJ
Truggy: www.banggood.com/custlink/KmvJJdWDlt
I have an ftx tracer (basically the same chassis) upgraded to brushless 4200kv, on 3s its a little beast! I dont think people apreciate these little 1/16 cars for what they are, i love bashing it as much as my kraton and mt10 and go even harder because of how tough it is and cheap to repair 😁 keep up the good work boys!
Yep basically the same as the FTX Tracer, all the parts fit so nice and each to get spare if you need them as well. Such great little cars. Need to finish building our 5,400kv one
Awesome video! It looks like you guys are having a blast!!
Thanks, had a lot of fun making this video and glad you enjoyed
I got this car and have already had alot of fun. Only running it on 2S.
Only issue - clipless back body clip broke already. When landing on the body, all impact is transferred to that clip. Luckily it's possible to 3D print a new part.
Recommendations: if you're using for "bashing", consider the clipped version of the monster truck as it'll break less.
They are great little cars and so tough, surprised you broke the read clip, as you can see we beat the snot out of the car including landing on the roof and it didnt break, but nothing is truly unbreakable and sometime just landing different can have an effect
"Best basher in the world ever ever ever ever ever" they say... Ok I'm very very impressed with the MJX Hyper Go Brushless after seeing this. It really took a beating with no problems. The one thing that really helps these smaller RC's is just that the smaller size. It keeps the weight down which translates to less force on parts when crashing. I was blown away buy the Mini E-Revo vxl but its twice as much money so no budget rc there for sure. Great video as always! I hope to see you soon for Send It Sunday's!👊👊👍👍
Indeed, the lower weight deffo helps these little cars, they do make great skate park bashers and a great entry car for kids to use as well, this one really surprised us and parts are available in the UK for them as the FTX Tracer parts all fit, presume those parts are available in the USA as well ?
Great fun video. Good job guys. Oh and the car took a beating. John
Thanks John, the little car did take a beating, had a lot of fun as well
I wonder how a Traxxas, Arrma, Corally... RC car would look like after that treatment :) Great video HardcoreRC!!
I know how the Team Corally would look, and would be waiting for parts for months to come 😂😂
Already bought one... good to see how tough it is tho! Wish it had the bluetooth module that the brushed version has tho...
Yes!! Epic little things! Bombproof and quick out the box! Well done MJX and great vid guys! 😎👍
Thanks, i know you love yours as well. MJX are onto a winner with this one. Now just need to find where we can get the 3s lipo from, waiting to hear back from MJX
wow awesome little rig 👍 good blast
Thanks - loved this little truck
@@HardcoreRC yeah for that price unbeliveable strong 👍
Subbed lads love the energy think I might get one !
Thank you for subbing and watching 👍 welcome to the family
That thing takes a better beating than some of the more expensive models. Well impressed gents.
Thanks Adrian, these little cars are crazy good, absolute bargain for the price
Epic little basher!🚀👍🏻👊🏻👊🏻👊🏻
Crazy how good these are for the money
Trying to work up the courage to order a MJX Hyper Go 16207 from BangGood. My first RC purchase was from Amazon, I picked up a HBX 16689. I'd like to try the HyperGO, but need some convincing as I have not ordered from BangGood prior.
I have ordered many things from Banggood and not had any issues, had a receiver turn up that didn't work, they refunded, had a servo pack up after a couple of weeks and they refunded, delivery has always been quick, normally within a week, but need to check its in stock when ordering, i would just suggest paying via Paypal or credit card for extra security, but i would also suggest that if ordering anything online from anywhere
i think we need to see it do 50mph into a wall just for testing reasons of course
LOL, not sure the front would stay down at 50mph, it was liking to lift at 37mph on the grass
hi man! Nice video! When the video where you change the motor and Esc?
Awesome 😎
Thank you! Cheers!
Great vid 👌
Glad you enjoyed it
I'm lovin' it!
Cant fault this little RC, cant get better bang for your buck
Received mine yesterday took it out for a bit a of bashing today.....absolute beast monster! Ran it with a 2s 1800mah 25c and its fast enough but gonna try a 3s 1300mah that i have laying around tomorrow. Guys or Gals dont hesitate.... its worth every bit $120 that I paid....Fun Fun Fun!
Thats good to hear, they certainly are great little cars, as you say fun fun fun
@@HardcoreRC bad news...the servo is shot from just riding on asphalt up and down the street...a few tumbles even jumped some steps....the store is sending me 2 metal servos as replacement.
@@RayRiv73 oh that sucks, i guess you can get bad servos on any car, looks at Arrma for example 😂😂, good your getting two rpelacements, where did you buy it from ?
@@HardcoreRC aliexpress
Love it, I want one
Seriously the best budget basher we have ever had or tested. In fact it is more fun than some of the more expensive cars we have
Just bought one of these as my first RC car since I was a young lad. Told my wife it's for the little one, but he's only 3 so it's really for me, and an excuse to do more when I take him to parks etc lol. Mine will come with the 2S and 3S batteries and USB chargers, so interested to see how they compare. Out of curiosity, how long do the default batteries last?
Will be a great car for your 3 year old son to have a play around with. Run time depends on so many factors, temperature, surface your running on, how fast and hard you are running etc. But you should get around 10 minutes per battery
Very nice. 🤘🏻
Thank you 👍👍
I would love to see it torture tested vs the hbx 16889a pro. The 16889 has been the standard for unbreakable cars for a while. Has it been dethroned?
They are basically the same car, however with the MJX you get the option of 2 MT's a Buggy and a Truggy, the MJX is also slightly cheaper. MJX also has honeycombing in the chassis for added strength
This thing was a BEAST!!
It sure was, and i know you were trying to break it as well 👍👍
Bet!
Does the 45a esc on the Hyper go have a LVC for when you use your own lipo batteries? Or are you just estimating the voltage cut off time?
Yes the ESC has LVC cut off for when you use your own lipos
I’m a fpv drone guy but I’m seriously going to buy one of these as my first rc car next month
You wont be disappointed - great car to get started with and super tough
@@HardcoreRC I lied I couldn’t wait till end of next month to order so I’ve ordered one tonight China to uk be here on the 5th jan 👍🏻
@@steviefpv LOL, im like that as well, hope you enjoy 👍👍 if you do manage to break it remember pretty much all the FTX Tracer parts fit and you can find those parts in most UK modelshops
I’ve been doing a lot of research on this car and am really considering it. Are there any noticeable problems you have had with the car or any upgrades that would make it run better and ultimately be more fun. Thanks in advance if you answer! Great informative video.
Its a great little car, cant be beatn for the price, and if your in the UK most of the FTXC parts fit so spares are easy to get
Does it drive straight? Mine drifts left or right following a right or left turn. I’ve adjusted the tow but the servo has trouble going back to center after a turn.
Ours drives perfectly straight with no issues going straight again, sounds like you may have a faulty servo, I would contact where yo bought it
@@HardcoreRC Great thank you. I already swapped the servo and it still has the issue.
Epic little tuff buggy
Crazy how tough this little car is, so much fun as well
@hardcoreRC, what 3s u use in this? I'm buying one and need 3s.. 😁
Keep up the good work 👍👌
I have asked MJX and am wailing for a response - i do know that this lipo does fit with a slight mode to the batter clip and some foam at the front of the tray: www.overlander.co.uk/2200mah-11-1v-3s-35c-supersport-pro-lipo-battery-deans-connector.html?campaign=GoogleShopping&gclid=CjwKCAjwsfuYBhAZEiwA5a6CDEFZk36DKrBD3rbL1rI7TC1dYO1PpEeG2Y3PBtB6Eq00eNFHRdYqkBoCkVUQAvD_BwE
Nice vid vro
Thank you and thank you for watching
Hi Love the video. Just bought one for my son as his first RC car. Can you tell me where I can get the 3s battery that fits. Thank you.
Its a great little car, 3s battery you should be able to find on Aliexpress, or the other option is to get a something Overlander 2200mah 3s pack, cut the little tab off the bottom of the battery holder arm and add some high density foam at front to stop the lipo hitting the steering arm: www.modelsport.co.uk/product/overlander-supersport-pro-111v-2200mah-35c-lipo-pack-deans--376589
Guys. That was epic. Full on into the wall.
Hehe, thanks, we had to test it like the brushed one, took it like a champ as well
Great video!! 9:30
Thanks - glad you enjoyed it 👍
✌🏻😎🏴Looks like a cool little basher 👍🏻. The only thing I don’t like is the battery.
It is a great little basher, dont dislike the lipos now they come with the balance plug, you can fit other lipos as well if you wanted to
wow great bashing 😂 surprised me how much abuse that actually took! i’ve recently ordered one of these with the 2s and 3s Lipo’s included, could you tell me if the included “USB” charger is safe to charge the Lipo’s or would i need to purchase a balance charger to do this?
Super tough little cars, deffo my recommended best starting bashers car. The USD charger is fine and safe, will just take a while to charge the lipos over a proper hobby grade charger
@@HardcoreRC Great! thanks for the info 👍🏼 i’ve ordered a hobby grade balance charger too, can’t wait to give this little basher some stick 😂🫶🏼
What a great review. What camera did you use on the side of the truck? GoPro seems to be a bit heavy?
Thanks, jyst se the little Insta 360 Go2 great little camrea and pretty tough as well, as you say Gopro is to big and heavy, also breaks to easy
@@HardcoreRC Thank you - i own the go 2, too - but never thought of mounting it under a car on the side of the truck :) -thx!
What’s the difference between Bezgar HP161s and MJX 16208? They kinda look the same tho. And which is better?
The main difference is the Bezgar HP161 is brushed and the MJX 16208 is brushless, dont know about diffs and gears etc as dont have the Begar car to compare, you also have the FTX Tracer and HBX that are basically the same car as well
You guys are sick
Heheh - thanks
i cannot wait for my order.. same model body i order
They are very good, think this is the best body option as well with the clipless system
Nice 👍😊
Thanks 😊
Were can I find the 3s battery for this please ? Thanks in advance 👍🏻
I have asked MJX and am wailing for a response - i do know that this lipo does fit with a slight mode to the batter clip and some foam at the front of the tray: www.overlander.co.uk/2200mah-11-1v-3s-35c-supersport-pro-lipo-battery-deans-connector.html?campaign=GoogleShopping&gclid=CjwKCAjwsfuYBhAZEiwA5a6CDEFZk36DKrBD3rbL1rI7TC1dYO1PpEeG2Y3PBtB6Eq00eNFHRdYqkBoCkVUQAvD_BwE
No issues with the Esc delay or breaking diffs?
none whatso ever - diffs are all metal on this and no delay
Boom
Big Boom, or not, little car wouldnt die 😂😂
Boom just subbed
Thank you - hope you enjoy our videos
The fan can be replace is easy fix, or take away the broken leave the heat sink, still great mini monster truck, to many people will to have it
Yeah doesnt really need the fan, and fans break on pretty much every RC when you bash them hard. Really is a great mini budget RC. Thank you for watching and commenting
Friggin awesome video and car. About to buy one, but which 3s battery is compatible with it? Cheers
Where are you getting the car from ? you can buy from aliexpress with a 2s and 3s lipo: s.click.aliexpress.com/e/_DB9D8j9
Or you can buy separate 3s lipos: s.click.aliexpress.com/e/_DEvnBnD
Or with a very small amount of modding we use this: www.modelsport.co.uk/product/overlander-sport-111v-2200-mah-35c-lipo-pack-xt60-386915
@@HardcoreRC what was the modification required?
@@michaelclemente9014 had to remove the tab on underside of the lipo holder leaver and add a small amount of HD foam at front to stop lipo sliding forward
Nice
Glad you enjoyed and thank you 👍
How to get these 3s Lipos? Only the Truggy/Buggy Version has 3s?
I have asked MJX and am wailing for a response - i do know that this lipo does fit with a slight mode to the batter clip and some foam at the front of the tray: www.overlander.co.uk/2200mah-11-1v-3s-35c-supersport-pro-lipo-battery-deans-connector.html?campaign=GoogleShopping&gclid=CjwKCAjwsfuYBhAZEiwA5a6CDEFZk36DKrBD3rbL1rI7TC1dYO1PpEeG2Y3PBtB6Eq00eNFHRdYqkBoCkVUQAvD_BwE
It is ok if i swap servo horn stock with alumunium servo horn ?
If you want to swap the servo horn for a aluminium one that fits that would be fine
My chassis just cracked because I accidentally hit a parking curb… it’s definitely not indestructible but at its price on 3s batteries it’s worth it
This looks like something my son and I could use longer term. Thoughts about space in the compartment to swap in a better transmitter/receiver combo. Quite like the idea of a Dumbo RC or FlySky transmitter and a receiver that works with it. Do you have a suggestion from the list of your links above? It would be also interesting to know if any of the transmitter/receivers allow for a reduced torque response, such that we could still enjoy maximum speed on a 3S lipo, but be less likely to wheelie all the time. Thanks again, and great video!
As its a 3 wire servo any transmitter / receiver combo would work if you wanted to change it out. I'm not aware of any radio that will lower the torque on a brushless motor im afraid, most have a throttle limiter option but this would also reduce the top speed
Great vid. What camera do you use in the car?
Thanks - use the Insta 360 Go2
I got my son this for Christmas and he loves it. The only issue we came across is it's response time when in reverse. We have to try and try but eventually it it does reverse. Hope someone can help us with this. issue.
This is pretty normal for RC cars, they dont go straight into reverse as they are break first, once the car has stopped you need to centre the throttle and then push to reverse, if you dont centre the throttle the car just thinks your breaking still, can take a bit of getting used to
Hello from Barcelona. Which is the gps from the video where yo u can watch the speed in your mobile??
Hi from UK: www.banggood.com/custlink/Gv3ESl2gHV
Temu has them for $85 US just ordered one! 👍
Thats a proper deal - nice find
Hey awesome video. Do you have a link for the FPV camera that you used?
Its a Insta360 Go2 camera - very nice little camera for onboard footage
@@HardcoreRC Thank you so much! Looking forward to more awesome videos from you. Cheers!
What model # is that one so I don't the last model non brushless?
They do two monster trucks in this link, both are the Brushless ones, the one that is different color to ours uses clips to attach the body rather than the clipless one. www.banggood.com/custlink/3K3WCyWmad our one is the 16208 and the clips one is 16209
I can’t believe the boys can’t break it. That rc is Hardcore
Trust me we did try to break it 😂
Great reviews just wondering if components are water proof
Thank you and very good question, i have tired them in water and also tend not to drive out cars in water as even if the electrics take it it kills the bearings etc
Meant to say i haven't tried them in water
@@HardcoreRC great thank you. Son wants to use it for general use and mud use but not sinking it into deep puddles.
I’m on my 3rd rear shock tower. I’ve ran the thing 5 times.
How the hell are you breaking the rear shock tower once, yet alone 3 times ?
help me please lol.
my 2 sons want a offroad rc car for grass ect was looking at one of these but would need extra batteries which would fit?
either that or im have to get them nitro ones as battery prices look so expensive for 10-15 mins use i need somthing that will last atleast a hour
With a slight modification to the batter clip i run the Overlander 2200mAh 3s lipo, makes it go like stink and get around 15 mins run time, run time all comes down to how hard you are pushing the car, flat out will drain the batter quicker than driving at half speed, so you could run on the stock battery then switch to the faster battery once the stock has run down. Not sure if you have had nitro before but they have their own issues, noise, reliability, tuning, Sometimes is just nicer to be able to stick a lipo in and run a car
@@HardcoreRC i had a nitro many years ago and yea a bit of a pain to tune i just cant figure out best way to go just want somthing that would take a bashing and somthing that will actually last i know parts need replacing over time . was looking at the ftx zorro nitro and carnage dont know if you know anything about them?
thanks for helping me
@@danm620 That's ok and do understand where you are coming from, Nitro is something i need to learn and would like to get one as well, just seeing others with them i know how frustrated they get, one thing i have learnt is a starter box is 100% needed.
Dont know much about the FTX Zorro or Carnage, FTX tend to be lower quality over all but with some real gems in their line up, the DR8 for example and also the Tracer which is the same car as the MJX hyper go
I wish they'd make it clearer which battery comes supplied. In the "Description" section it states a 7.4v battery which would be the 2S battery. Whereas in the "Feature" section it states either "Support 3S battery" or "Standard 3S battery".
The Buggy comes with the 3s lipo and the others come with the 2s lipo, im talking to them about the 3s option and also where to buy the 3s lipo - i am asking them to offer the car with a 3s lipo as well
@@HardcoreRC Sweet! It's the buggy I'm liking the most due to having seen how good the shocks look (in another video) relative to the bouncy shocks of the monster truck iteration. Also, its ground clearance is surprisingly greater than the truggy iteration albeit by 1mm.
Yep, I'm not buying any RC with only one battery when it's seemingly a proprietary battery so they REALLY need to be providing the option to purchase these RCs with 1, 2 or 3 batteries supplied like they do for some of the other RCs of a similar size and price.
You say they contacted you? Wow, you are famous
I know - good right
Defo a skate park basher that 👍
It eats skate parks for breakfast, lunch and tea 😂😂
Now I know what I'm buying the family if I can't afford the mt10's for Famjam 2023
You wouldn't be disappointed, great little RC
can you mount a full sized gopro on it?
You could but it would be pretty heavy for the car, better to use something like the Insta360 Go2
These are some tough judges.
I totally agree 😂
Krass Stabilität
Danke
I have a question, did it broken? Thanks bro
Just what you saw in the video - tough little cars for sure
An aluminum red rocket fan will make it perfect. Wait, I think red rocket means dog weenie? 😂
Dont need any dog's weenie's 😂😂 but if it needs a fan the rocket one would work a treat
Definitely need to sell it with 3s batteries! Two!
Agreed, im waiting for a response from them on that
Link for MJX 3S lipo battery?
s.click.aliexpress.com/e/_DdGKb59
Do you still recommend it?
Yes, very much so, great car and great price
4 yo son put his into the gutter at full speed and the top of the front strut snapped off. New shocks inbound haha
Oh that sucks, hope you get it fixed up
@@HardcoreRC ordered some new metal body shocks and did a temp knead it putty repair that’s held so far. He is driving more cautious now haha
What's the difference between the 16208 vs. 16209 please ??
Just the body - the 16208 has the clipless body as in this video and the 16209 has a body held on by body clips
@@HardcoreRC which one do you think is a better system ??
@@markdwyer8858 have only seen the clip body once and didn’t like it, deffo prefer the clip less one
Looks like MJX Hyper Go just took the crown 👑 from HBX 16889a pro.
Effectively the same car, this one is a little cheaper and also comes on 4 different versions, also the FTX Tracer is the same, gives good options for spares if you ever need them
@@HardcoreRC the mjx has a bigger battery compartment always has but now with brushless and a 45a standalone esc you can put bigger 3s batteries unlike the 16889...thats where it wins.
@@RayRiv73 Oh yes the HBX does have the short battery compartment due to where the servo is, we fitted a nice long 2200mah lipo in our brushed MJX and could do the same on this one
now they need to scale it up to 1/10
I hope they do, would be interesting to see how it compairs to a TA Rival MT10
Everybody keep saying how good they are but no one tells you about the horrible delays with the throttle and staring
Have never had that issue, if we did then we would have reported in, also know lots of other that have this car and not had that issue, can only assume you have a faulty one, which can happen with any brand
@Awalkaboutwithjosh just got mine..and yep, I imagine it's to not break sheet on hole shots
Shame they don’t do spare parts had to buy ftx parts for mine but there not as beefy. The drive cups that the dog bones sit into are made of monkey metal, where the dog bones are soo chunky it breaks the drive cups instead of the dog bones bending/snapping.
Not had that issue, can get spare parts from here: www.aliexpress.com/item/1005004679687294.html?spm=a2g0o.productlist.0.0.6a094013ZzW3bo&algo_pvid=7872274c-5ee7-4c25-b470-b4c60a85624c&algo_exp_id=7872274c-5ee7-4c25-b470-b4c60a85624c-5&pdp_ext_f=%7B%22sku_id%22%3A%2212000030076524226%22%7D&pdp_npi=2%40dis%21GBP%216.5%215.19%21%21%21%21%21%402100bde116629775539027548eeaf0%2112000030076524226%21sea&curPageLogUid=2b2Nf0TU9ggf
Also as you say FTX or HBX parts also fit
@@HardcoreRC it makes me laugh watching how hard you and the son bash it yet i brake it in 5mins with no bad crashes😂
@@ctay1071 WOW, maybe the way it landed, sometimes how a car lands can make it appear to break easy. I know Chase has the FTX Tracer and brakes ever car he has in very short order, he has yet to break his FTX tracer
@@HardcoreRC yeah I guess I had dodgy landing, the next bash should let me know if It’s good. Cheers bud👍
@@ctay1071 Hope you have more luck with it, you saw what both of our ones have taken and nothing edited or cut out.
What camera is it on the car?😅
Insta 360 Go2
Thank you😊
Are these discontinued? The link doesn't work :)
Ohhh it doesn't - that's very strange, they haven't been discontinued, maybe Banggood just not getting them in now ? appears the links to the Truggy and Buggy still work, you can get the Monster Truck from AliExpress still: bit.ly/3EasjoJ - i have sent my Banggood contact an email asking the reason its showing as discontinued as well
@@HardcoreRC Thank you. I figured they aren't discontinued a bit later after commenting, I found them in stock on AliExpress.
So it needs a Surpass fan then job done.
Not sure it even needs a fan, need to run and see how hot it gets with no fan
Give it a lick!! 🤣🤣🤣🤣
Hehe, no way either of us were going to lick it, just something stupid that popped in my head 😂
Funny mine broke before i killed the 1st battery.
Front axle ripped apart. Broke right out of the cheap plastic housing.
Than i got a smaller truck but way faster and better and same price. Haiboxing
May have got a faulty axel, you saw what we did with ours and this is the second one we have had with no issues. Hailboxing is HBX who make the exact same truck only the lipo is on theother side and needs to be shorter
Yeah idk. Its a cheap plastic housing that held the axle in with some metal wire wrapped around it ment to make it stronger but it ripped apart. And the part that borke is 1 of 3 that they sell upgrades for they know its cheap and breaks regularly. I think you you guys just got lucky.
Also the model i got was H16SC with the GPS on Amazon its like $100 but had a 40% off coupon thats why i got it for $60 sure its cool but need to take the time to upgrade them axle joint things. Think they only another $15ish 😕
The haiboxing is awesome 👌 though right now im unsure if i want to go all in and upgrade it some bigger wheels for sure metal shock parts steering parts heat sinks about $80 worth of parts i have picked out taking me just under $200 or return it and simply buy the Traxxas slash truck which is $200 usd on Amazon.
@@miguel360kmc Ahh you got the brushed MJX, we reviewed that as well and couldnt break it. Think it may have been you that was unlucky, i know we didnt break ours and we certainly tired, Tomley who i trust 100% beat the snot out of his, i know ithers that have these trucks and cant break them, as said they are the same as the FTX, HBX versions, all considred the toughest budget cars you can get.
If it was poop we would say it poop like we have with others cars we have reviewed.
Eli 15 kmh valhetta 3 s akulla.
none of the links bring me to the gps version
Are parts available for this truck? Not that it looks like it will need any 🤣
Yes parts are available, either for the MJX Hyper go from Ali Express, or the FTX Tracer or HBX 16889a pro as they are all basically the same car
But it get wit it
It did get it and it loved it 😂
Just ran mine at half speed hiting staircase with left tyre and broken whole steering rod with all parts near servo.... It was not a 20% of hit your car took and mine blasted :/
Sory to hear that - how cold was it ? cold temps effect the plastics on all RC cars and make them brittle
Well yea, it was 8-9 C°, not too cold but not warm... Well, ordered whole new rod but alu this time so we will see :)
Poor little car got absolutely abused and still came back for more 🤣 I wonder how it would hold up going head on with one of your Losi's?
It loved every minute of it 😂😂 would be funny if it broke the Losi 😂
5:40
Did you like that bit ?
Who else has failed diff because of the 4 screws holding the diff body together shear rendering the diff useless. This is a manufacturing problem that hopefully mjx are going to addres.
Not had or heard if this problem, and we have beaten the snot out of both of ours, also not heard of the issue on either the FTX or HBX versions. Is that on the bulkhead or the actual diff ?
Actual diff the screws literally shear and you can't remove them because half the diff is plastic , the diff is out of stock mostly everywhere now and where you can buy it they have ramped the price up.
@@boyeselectrical Sorry to hear this, as said not had that issue on either our brushed or brushless cars. Have found the diff in stock here not sure how much it was before but £8 for a whole diff doesn't seem that bad to me: www.aliexpress.com/item/1005004799209609.html
Appreciate the links as you say it is in stock but 2 replacement diffs delivered to UK is 27 GBP for something that is not really up to scratch from factory and also buying another part that will fail without modification . Anyway cheers for responding regards Dan.
Taitaa kestää paremmin kuin wltoys 144001
I wonder if people like to drive like this or its just for the video.
Some people like to drive like that and some dont, all really comes down to what you deem as having fun, one personas way of having fun will always be different to another's, is there anything wrong with that ?
@@HardcoreRC Nothing wrong, but its not my style and dont understand whats the fun of braking rc cars. If is a durability test i understand but i can see that half of race channels just want to brake the cars. I prefer reviews where i can see a realistic driving like real cars. Like in games some like arcade racing games where you corner without braking other like sims. I just asked dont get mad at me. 😀
Yeah i dont think he was on 100% throttle
Its over 100 not a budget car
Made this video before it had been released price wise, its £115 which if most defiantly budget, if you can show me a hobby grade RC under £100 that is as good as this I will be happy to get one and review
I see they copy Traxxas
They kind of did, but hey the body doesnt pop off so looks like they did it better as well 😂
Traxxas would be good too if they stiff more of the body up
@@tobydyes Not sure that would help, i put a unbreakable body on which is much stiffer and fits a lot tighter, comes off even more now and ejects high into the air 😂😂