CBD Oil and Solvent Extraction Screw Press. MCT, Coconut Oil Infused Hemp
Vložit
- čas přidán 12. 08. 2018
- Virgin Coconut / MCT Oil Infused Hemp. Extraction of crude exudate for short path laboratory processing and refinement of CBD + other Hemp oils.
- Věda a technologie
It's great to see this... I have healed myself as well. Weedborn oils have helped me a lot.
Can you imagine all the extra uses you can use that material. All that extra fiber can be great compost.
Thank you! Awesome video!! liked and subscribed. Srq, Florida!!!!
Nothing like a little garage smog to add to the efficacy of your CBD products!
Looks like the perfect Bio-Diesel for a car or truck; and compost for a garden!
lol
Everything is
natural Mente. . .
I grew up around cows, so this video is kinda nostalgic.
Me too!!
Plop. Lol
Hello sir .What is the mimimum revolution of the screw press to extract the moisture?
Very nice 👍 for a commercial op that's great.
So what happens with the last bit that can't compress due to no more material in front of it? Are you left with an augers tube worth of unprocessed biomaterial?
how much does 18 L f material weigh? how much did the hemp weigh before it was soaked versus after? great video!
Was the product cured before you blended it with the solvent or was it still green? Also, what is the brand of the machine?
How much weed did you use to get that amount of fluids how much water is in that liquid I thought you had to dry the product really good and extract the oil with CO2 or isopropyl or butane
#Thankyou for showing #video #Awesomeness #newsubhere
Do you run the dry material back in for one more press?
Hey, the extruded cake can be ground and pressed in small cones for incense 😁
@Michael Jones Yeah that stuff would make terrible incense. Making it into 'wood' pellets sounds like a good idea. I was thinking animal fodder (add to hay or feed for animals to eat as fiber) or a kitty litter additive.
Hempcrete actually.
Maybe add to biochar.
One of the uses I'm looking at anyway.
How often do you sanitize the equipment after it's usage?
Sorry, either I did not understand something or something essential is missing in the article, for me it is coconut oil mixed with vegetable juice depending on the type CBD or THC containing and nothing else, nothing was extracted. Could someone enlighten me.
What happens to left overs? How do I find out more about this process? What happens to dry stuff?, I'm in Sarasota FL
Thats a good question ... can the dry cake be used for anything
How much CBD & THC in the Oil and Leftover Cake ? The Raw material is Flower & leaf, right ?
Do you just user the flowers and leaves of the female and the leaves of the male to extract CbD oils or also other parts
Lloyd Griffin they use all of plant besides main steam.its not like cannabis were males are no good.weight is product in cbd hemp.cbd shatter I assume is buds of flower.but who smokes cbd.
@@dirtydoughboy2854 I smoke CBD all the time love it.
Kind of like a beehive unit we used in a chicken plant to separate meat from bone .
Were you able to get the CBD values that would get let's say from CO2 extraction? Would this be considered organic the way your doing or full spectrum?
We get out 98+% of the CBD. CO2 wouldn't pencil out right now for CBD. THC is a different story because the flower sells for 20-50x more. Those that use CO2 bought them when the price was significantly higher. Most are using ethanol and hyrdocarbon now but I like the idea of hemp oil, olive oil, or coconut mct for the reason you mentioned above.
With our press most use it for post process waste material to squeeze the rest of the solvent and CBD out. Some do use it as a primary extraction vessel but it will press out more waxes and chlorophyll you will need to filter out later.
Do you need activated bleaching earth to decolor CBD oil?
Looks very similar to the beeswax screw to get all the honey out of the wax cappings 😁
I need one of these machine
Do you have a half capacity machine. Like 55 lbs/h & 21,400/2=?
Our screw presses are an integral component of any medium to large scale Hemp processing with either Ethanol and/or MCT Coconut for the extraction of CBD oils for short path distillation and refinement
great video! if you dont mind me asking, about how much could you sell that bucket of oil for. and are theyre any uses for the leftover flower?
i use hemp seed oil, not olive or coconut oil with a omega masticating juicer run twice......
@@GaryWRose How long do you let it soak? Or extract I should say. I hope you see this.
Great video very well made, shows process very well. 2 questions where can purchase that particular machine and how much material to oil. Thanks for the demo.
Vincent Corporation - Tampa Florida. Over 200 in operation currently
@@Mattinator1973 i want one....
@@Tappedline give us a call *813) 248-2650 or email matt@vincentcorp.com
@@Mattinator1973 Hello Vincent
How do you get that wet hemp from the beginning ?
Thanks ;)
@@marcelsinky1652 The hemp was delivered to us to test and see how much of the oil we can press out of it. This was material the customer had already processed and we were showing them how much they were leaving behind. You can email me with any additional questions Matt@vincentcorp.com
Great vedio,do you need a hemp dryer?
What's the name of the machine you are using? Just got into the industrial hemp business in California
Hi there,
If you use an extruder you’ll be able to break the cell’s membrane, making it easier to extract the oil in the press, besides that, the extruder, due to the pressure will heat the bulk material over 120ºC, sterilising the bulk material. With the extrude+press method, you’ll obtain a higher yield of oil, and a cake with less oil residue.
We don't build extruders we build screw presses. Most of the 200+ we have in the hemp industry are used on post process material so the cell walls are already broken open when they process. This was just a test on waste material. They bought the press and it paid itself off in a week. Shows how much money they were leaving behind
My boss wants one dose it process hemp only no additives?
are these hemp flower infused with mct oil? Do you need to decarb the hemp first before infusing it with mct oil?
Yes its infused with MCT and was processed. We were using the press to show them what they are leaving behind. Press paid itself off in a week for that customer. I don't think they are decarbing it before pressing the waste material.
MattVincentcorp what temp the use for decab..after the extraction?
Although this Hemp material was more shredded at the stage we started this test, it all started as flower and leaf material.
How do you get rid of the press cake?
Hello, we have a hemp shredder, a grinder and a dryer. Do you need one?
Your contacts?
E-mail:danicawang@cngxmachine.cn
Tel: 0086-371-68530216 Fax:0086-371 - 68530223
Mob: 0086-15515910571 (WhatsApp ID) (Wechat ID)
@@ruhonge
How can I get in touch with you? I live just outside of Tampa
CONTAINS: Antioxidants, terpenes, bioflavonoids & a full spectrum of cannabinoids
Full spectrum is just led you fucks stop boasting it ppl do great with all white led and regular ol bulbs stop boasting full spectrum
What spectrum, the full spectrum of cannabinoids lol what
@br de lol dirty kids I said dirty mids
@br de they just started issuing hemp cultivation licenses and breeders licenses in Florida in April but these guys screw press would do Ight in a sterile area
@br de no cultivation for commercial use anyone can grow premium organic indoor hemp that will look, taste, smell and smoke exactly the way cannabis does. Only no one is getting high from low thc content so it’s legal to smoke in public only the stuff they sell now is brown dirt from old school industrial hemp ppl who army concerned with harmful products and contamination. 2022 will be the year
How much is the machine and how heavy it is I'm impressed
4 gallon blue cap
whole seed ? cake ?
oil? what is capacity.
of the expeller press
i am seeing the oil out one end..and look like alot. maybe look like 200 pounds of oil per hour. in which case of castor seed
would be a 440 pound feed.
Im not quite clear what you are asking. We were testing post process Coconut / MCT infused hemp to see what we could squeeze out of the waste material. Very successful test. Seeds don't do all that well in our press. An Anderson Expeller would work better. 110 lbs an hour to 70,000 lbs an hour on a dry basis
Can it be used with alcoholic extracts for fine herbs like ginger and cinnamon to separate the extract from the powder
vincentcorp.com/content/ginger/ give us a call (813) 248-2650
And what is the CBD lab analysis? How does it compare with distilled CBD?
Cbd is cbd. It's the same
wow i want one
Hi, what is the liquid you use to wet the material ? Is it just water ?
Most tend to use ethanol but our customers use a variety of solvents. Coconut/MCT, olive oil, hemp oil, BHO, Acetone, Hexane, Pentane, Heptane. Everyone has a different way of extracting CBD.
Make fire starters with the pressed material.
AP hame is machine ki price bta dy aur yai 1 din m kitna tel nikale gai
is there a value use for the cake stock food compost etc
Yes some of our customers turn it into feed
Id do a 2nd run. Looks like when the press goes bake ya lose some. Am i wrong ????
You could but there is a law of diminishing returns. The press will press out most of whats possible on the first run but there are other factors that could come into play. If the material blinds the screen in certain areas somf of that press liquor might make it into the press cake. In cases like that you might want to run it twice. Some of our customers use counter flow wash systems with 2 presses (the second press injecting ethanol directly into the screen area) to press out everything they can.
60 lt × .75 lb 1/2 lt ?
45 lb hr..
pre press wet of oil. ?
water
Weedborn oils are good for this.
Do you use the by product as mulch/fert?
Yes some of our customers pelletize the material after its pressed and use it as feed.
That would be a very crude and watered down product ya? What % cbd is the liquid and what do you do with it from here ?
Nope. We recover 98-99% of the CBD oil in the plant. From there they winterize, remove chlorophyll, remove fines if present then separate the solvent from the CBD with a rotovap or falling film. Most of our 180 customers using it for hemp run ethanol
@@Mattinator1973 cool stuff
Where can I buy this machine?
Does this really press out the oil? Or just excess water with some oil? Is the cake spent or does it still have oil in it?
*I believe it's just a moisture expeller. You'll need more sophisticated equipment to properly blast or cold-press the sticky trichome resins from your hemp pulp. The same process can be applied to high THC cannabis biomass for wax, oil and dab preparation.*
If you ran dry hemp through it would not press anything out. If you soaked it in say ethanol or Coconut MCT and let the trichromes disolve then the press would press out close to 98% of the CBD. You will however get waxes and chlorophyll into the press liquor so a winterization process would be needed after. This particular test was on post process material a customer sent us. Test was an amazing success. They love the press as it paid itself off in a week. Vincent Corporation matt@vincentcorp.com
May i ask what press machine is this ??
Choke should be set and solid every time it opens up the flow nearly stops .
Pretty cool
What is it wet with? Never mind, read your comment below.
Hi do you use the oil as is or do you process it forther and if so how please
Process further. Winterize, remove chlorophyll, remove fines if any present, falling film evap or rotovap to separate ethanol from CBD gets you to raw crude
Салам с Кыргызстана
Молодцы, удачи Вам
Are you going to use this product as lube in your oil change shop?
I dont think using coconut / mct oil with CBD in it would be good for your engine.
Это СИЛА!!!
I'm curious, does the CBD oil come from the leaves, or the buds?
from the buds as the trichomes do contain terpenes, and cannabinoids ( THC-A, THC, CBD)
Cbd come from the entire hemp plant, there are some cannabinoids that are only in the stalk and leaves, when you press the entire plant you are left with a full spectrum oil, if you only press the buds of the hemp plant then you are left with cbd a cbd b, and thc a and delta 8 and 9......the emotive plant has less then 3% thc so it’s considered to be 0% thc
Cbd and thc are present along the whole plant from the fan leaves to the stem but the higher concentration is in the flowers
What’s the cost for one?
Was the hemp decarboxylated in the MCT oil or decarboxylated dry?
2 gal 7m
20 lb cake
?
seed kg pr hr ?
What can you do with the dry hemp @ 7:50 Mark?
Make hempcrete
Feed the
An1mals!?
Throw your garden. .
It has lot of proteins, so you can mix it in food or feed animals. Just throwing away is not so good...
Hi, just come across you.
What machine are you using.
Is it a bespoke or available on the open market.
Nice stuff you got going.
CP-4 $21,400 - 110 lbs an hour on a dry basis. Available from Vincent Corporation (813) 248-2650
Reminds me of bees wax - honey separators.
What was the SOLVENT. What caused it to be so wet?
Elsewhere on this videos comments someone said it was infused with MCT oil.
MCT & coconut oil. It's in the title!
how much CBD was actually in the liquid vs cocount oil
@David Benford your totally not sketchy or anything..... 😂😂 yeah let's just call a random ass guy who isnt even affiliated to the person posting the video.
@David Benford you are doggy the a** fuck
I can tell you not even close to what i would show you how to produce yourself at home and a 12 year old could do it ..
@@ronwitek4539 i would like to know your method. We got about 50 lbs of bio mass.plan on grinding it up and soaking in 190 proof and using a airdryer to reclaim the alcohol.
@@gregcorley2757 what quality is your bio material? Starting material is important keep anything without apparent resin glands out of extract and don't crush up your material as much as just make sure it's not so compact the surface area can't be reached if you agitate it too much you will more than likely pull more plant matter also keep your material as cold as possible to avoid pulling out unwanted material.. these companies are making commercial products not medical products they may claim it's medical quality but only to the extent it has medical value not on the grounds that it's even close to top quality medical.. it's also important to note I grow my own in my closet and basement at home I've aquired some amazing genetics the below my oil comes out averaging I have up to date lab results with my name for the oil I produce for myself and my niece conformation the flower I grow is legal in all 50states %4 cbd above %60 so don't go to corporate America for this please help your real neighbor
Some metal flakes for your cbd oil . ( grinder in the back)
what kind of CBD oil? What kind of plant?
I think you remember how wet it was
That what she said
He only said it 20x .or 40 x ?🤣🤣🤣😎
Yea I’ll just rush down to my local hardware store and buy one of these presses?
Lololol
Fuck the A off from CBDA convert the CBDA into the “activated” Cbd. I don’t know know personally, I get the same effect from a big spoon full of peanut butter as from CBD. I bet there’s just as much medicinal value in CBDA as there is in Cbd!!?
I think you should experiment and find what works the best for you, don’t listen to popular opinion. You can’t believe everything everyone says especially your boss, they’re like government and no matter what they say they don’t have your best interests at heart! ;)
Don’t think of the plant as a drug. It’s not a drug because drugs are poison and to this day I’ve never heard of anyone overdosing on cannabis sativa :) Think of it as a magic herb with incredible medical properties that not only relieve symptoms better than any traditional medicine can but also cures what modern medicine was taught to believe was permanent or terminal. Well if whilst relieving symptoms as it cures and if it happens to improve your mood whilst it nourishes your endocannabinoid system so that our bodies can regenerate on a cellular level is that such a bad thing!???
Food is medicine and that’s a fact!
Thank Fuck For Rick Simpson!
Fuck I miss Bob Hawke! A great prime minister and a good bloke...... haven’t seen that since the late 80s!!! Don’t mind me, we’re a long way behind the modern world. Down Under
@Douglas Dishroon People dont realise cbd with out the thc is not medicine. It dont work...SNAKE OIL is being sold all over Texas and everyone says it dont work.
@Douglas Dishroon Thanks for the info Douglas.
I only trust
buyallweedsonline.com
Phone call or text or WhatsApp: +16266915046
because i have received my packages from them several and they products are of good quality. They are only on Google and not on this other social media platforms like Facebook, Twitter, Instagram, Telegram, Snapchat, YoutTube and more. Beware of all these scammers on this social media platforms pretending to have what they can’t deliver. I had been a victim several times and a friend had to tell me about them. DON’T be a victim too. Let’s say NO to SCAMMERS and put our money where we’ll find satisfaction and happiness. Love y’all💯❤️
Press it with a press between paper towel and youll see lots more than what you see here. Gravity rinse it with solvent and screw press again.
What would be the strength of that CBD? I want 1cup to try IT!
Most cbd is in the flower
you use press cake as cannabis flour
Like to know the suppliers of the machine
Can you help me to produce CBD oil in Nepal?
Who is the manufacturer of this press.
@complete supplier ~Do you still need assistance converting flower & biomass to CBD oil? If so, do you have an email?~
Is the extracted weed smokable? And does it get you high?
Truth Kangen most likely less then 3% thc
By that time we would have pressed out most of what will cause the high into the press liquor. You would be smoking about 1% THC or 1% CBD.
By that time we would have pressed out most of what will cause the high into the press liquor. You would be smoking about 1% THC or 1% CBD.
where can one get this machine ?
I make RIck Simpson Oil but usually only do 2-3 pounds each time this would be good fo have. Can you send me a link or any contact info where I can buy something like this?
I’ve seen RSO made using decarboxylated GOOD KIND using alcohol as a solvent then evaporated under low heat . RSO is generally 50/50 THC/CBD.
@br de Ive been able to get Trulieve syringes which are labeled 50/50. Ive never made RSO used Trulieve RSO to make butter a couple times. I watched vids on making RSO never seen it distilled.
why dont you use industrial hemp oil? instead of MCT and coconut oil?
Because our customer wanted to test coconut MCT oil. We don't extract here. We just make screw presses used in several hundred applications hemp being the most recent.
@@Mattinator1973 in hemp oil there are just 20% fat acid and in mtc oil there is up to 90% fat acids for the cannabinoids to be solvent in. its the best fat :)
@@parandersson9406 Thanks for the info. Unfortunately I don't choose the solvent our customer uses. Our press doesn't know the difference between hemp oil, MCT, or Ethanol. It just presses them out of the material.
Вот это сила!!! ЭТОТ ПРОДУКТ НУЖЕН ВСЕМ ЛЮДЯМ, чтобы перестали покупать за свои же кровные себе смерть! Каннавэй это настоящее и будущее вей планеты!!!
Any more oil if you run it through again?
You can get a little more out but it would be good to reintroduce the material with more ethanol. We can set the press up to directly inject more into the screen area
That sure don’t look or sound like the kind of environment for clean processing. Lol 😂
This is for testing and destruction purposes only. The factory employs 100 welders, machinists, fitters and assembler. It's a steel fabrication plant. Not a processing facility
Yummmmm
What’s the cost?
Do you have the plans for making this press, and how much it would cost to make it thank you
We have been building these since 1951. over 200 being used currently in Hemp industry and thousands of presses worldwide.
Enjoy the winterization process fools!
200+ of them are in operation in extraction labs across the country. Most of the presses pay themselves off in a week so the customers seem to be ok with doing a little more winterization to make an extra $5-30k a day. I have one customer who claims the press pays his salary each day he runs it. I don't know his salary but am assuming its 30k min.
To each their own though.
I needed
I can offer you german quality machines
Contact me per Whatsapp
+4917658881215
Can you buy this press?
Do you sell the machine?
Hello where Can I buy this device? Any lead be much appreciated
Do you ever use grape seed oil?
Some of our customers might. This was just a test. All material and liquid was thrown away
@@Mattinator1973 mmmmmmmmmm
The bucket sure was dirty.
I thought hemp was still illegal in the state of Florida.
It's legal in all 50 states! I get mine from witt.myctfo.com. They are the ULTIMATE CBD Products Company!
i use hemp seed oil, not olive or coconut oil with a omega masticating juicer run twice......
How long do you soak it?
Where are you located in Tampa I need some cbd strains
To grow or smoke?