Hyper Jet Steam Turbine (3D Printed)
Vložit
- čas přidán 15. 06. 2024
- #steam #turbine #3dprinted
The #LG #UltraFine #Ergonomic Monitor #32UN880 used for 3D design works:(US) : bit.ly/3qP5bGW (UK) : bit.ly/2YO1Egy
@SamRogers : • 3D Printed Vortex Rock...
3D Models:www.thingiverse.com/thing:515...
Follow me on Instagram: / integza
Support me on Patreon: / integza
Paypal me:paypal.me/jgomes1992?locale.x...
Discord: / discord
Reddit: / integza - Věda a technologie
![Tesla Earthquake Machine [3D Printed]](http://i.ytimg.com/vi/l5rEW9QgJDc/mqdefault.jpg)
Video idea: a glider that uses this reaction to get itself into the air and then uses servo motors on the wings and tail with an rc remote that you use to bring it back down to land. It would be way outside my skill level but I think you can do it.
Edit: tomatoes are disgusting!
That would be pretty sweet. He could even iterate through it by launching it off a rail with bungies while he worked out the controls 🤷🏼♂️
Actually yeah, that's kind of what I was picturing in my head. Maybe he could hand launch it too while he was working out the controls, like a paper airplane lol. I'm thinking about picking up a 3d printer soon, probably an sla
Jesus, he's not a god
The energy that the glider will harness wont be enought to keep it in air, because that energy will be lost by drag!
@@devdarkk he's experimenting with things that I have never played around with myself. If it's a bad idea then I'm not surprised 😅
SO GOOD. The noodles of course, not the amazing spark gap tesla coil sitting above your computer ;P
Word on the street is plasma channel doesn’t respond to his family
O hi Mark
You will get a 3d printer!!
😅😆😆
Using liquid air and electricity to sower it
I was expecting one of those glued turbine blades to detach and fly away. There is even a machine gun concept that works on that principle. I just can't stop giving you good video ideas.
..a few more iterations and we'll have a rocket for traveling to Mars... 😉
Great video Joel, as always!
If I visit in the future can we eat noodles on your floor together?
Floor noodles
Just why
@@theexpertgamer-pe9zi we don't ask here
@@theexpertgamer-pe9zi do not question him
Room for one more?
Video idea: create a 3d printed DC motor to use as a pump for one of your rockets, which would allow you to explain a bunch of different physics concepts
There’s no such thing as an electric engine. An engine runs off of combustion whether that comes from gasoline hydrogen diesel etc. and a motor runs off of electricity whether its an ac or dc motor.
@@UltraMagaFan solar power? Wait nvm
@@UltraMagaFan I thought an engine in this context was basically a device to convert one form of energy to another? Like chemical energy to a thermal gradient, a thermal gradient to kinetic etc.... So a DC motor would be converting electrical energy to movement, thus being an electric 'engine' .. right?
DC motor with Bell electromagnets will be so cool.In fact,one small electromagnet(20mm in diameter) with 100-200 turns of 0,1 mm wire can,on 4,5V200mA lift about 140kg of weight.Is that sounds awesome?
Nice
Super Feliz com o teu percurso! Já te sigo à bastante tempo e fico super feliz de ver o teu canal crescer! para mim tu sim és um influencer! congrats
Keep doing what you do Integza! :D Great content!
Video idea: 3d printed Rocket Plane, you could build an airplane and power it with your self consuming rocket engine.
The FAA would delete him
Peterstripol already did that, a few times
@@mk6315 the American government agency will delete him? Ok
Yes. Do this. AND POWER IT WITH AN AIR-ASSISTED ROCKET!
@@jamesbizs The ANAC in this case (Autoridade Nacional de Aviacão Civil) handles planes, drones and backyard rocketry.
Bear with me now, this might be a mad one but how about making a cat piano?
people have already done that
@@josephhayden8844 I haven't seen anyone actually make one, I'd love a link to a video.
William Osman
Nice pfp
You could try building a rocket which uses biodegradable fuel as a propellant. :D
Very good Idea
@@philippklmr yes yes yes yes
I cannot possibly agree with this idea, i would expect a more thoughtfull idea. Like
@Yuck Foutube for example but also Plants like sugar beet, sugar cane, and corn
I’m from South Africa, an engineering student, this year I got into 3D printing, modelled everything using my iPad cause my PC is weak. Must say I fell in love with it, only thing missing is a printer itself.
Stumbled across your videos and I’m impressed by the possibilities.
If you can make this on 3d printer, I even can imagine, what could you do with metalworking lathe and mill...
The ideas is unlimited
Yeah! Someone needs to give a lathe to this man
I thought he has a mini lathe?
@@ogt92fromthe1step9 really? Im not sure 🤔
@@papafrank8900 could of sworn in an older episode he showed the "baby lathe" or was it the mini milling machine either way it's a start 😁
For a future video you should definately make one in which you announce the winner of the 3D printer and explain why it is me!
imagine this in a Mobius ring
been subbed since 25k, keep up the great work!
IDEA: Have a separate container where the Potassium and Peroxide react and can build pressure. (Similar to the pressure cooker you used), with a tube and nozel that come from from the reaction chamber that are directed at your turbine. So you are only getting steam that can be used and not the unspent peroxide and potassium which are sprayed on your testing turbine. A pressure cooker would allow you to have the reaction, ensure a complete combustion of the Potassium and Peroxide, capture and contain the steam, and release it at controlled pressures and intervals. This is how it was done on the early rockets with a reaction chamber first.
*Integza tries to build a rocket engine:* Explosions, fire, melting plastic, and sadness
*Integza tries to make a basic steam turbine:* casually makes the best rocket engine he's ever built
Video idea:
Produce biodiesel from used cooking oil and propel a rocket loaded with tomatoes to infinity and beyond!
Too easy. Add five parts cooking oil, one part wood alcohol (distilled from wood), and add 10 grams of lye per gallon of oil (lye is rinsed from wood ash). Water wash the solution and drain from the bottom all the separated gunk or siphon the gas from the top.
It would be cool to see him explain how easy it is, but I don't think he'd be interested.
@@Cannedscourge "too easy" you say, I didn't even understand half of the words you use😅
I've been drawn into one of you're videos before in the past, I don't know why I didn't subscribe then. you make some cool stuff. Thanks.
good start
i think its cool that your willing to learn
Video Idea: making rocket that you can actually control (where it goes)
Yeah maybe with movable guide fins in the exhaust stream of the v2
@@harrycave6309 I think that this is the best solution to control a rocket, but I wonder what the accuracy would be like
Enjoy your printer lmao
@@harrycave6309 came here to suggest the same. Probably worth a try!
@Dave Doherty I haven't thought of this, but this also may work, I think
you have to attach a knife to this and then make a tomato cutter out of it
Awesome 👌
There are filters inside the funnels of air spray fluid containers. The big ones that you'd use to paint furniture. They consist of a really fine mesh that might be able to hold your catalyst powder, but I don't know if they can withstand the temperatures... They're really cheap though, so it might be worth a try.
Great video, really enjoyed this
Please make a video about a steam turbine generator!
The angle of the nozzle to the wheel and the wheel itself are very important. IT also helps if the wheel is encased so the steam won't go every direction at once. I know you built a tesla turbine and a Winkle rotary engine that worked on compressed air. Steam will do the same as compressed air.
The source of the steam also makes a difference. The v1 rockets needed to be primed before use. If you look at some historical information the v1 was hooked up and supplied steam in order to spin the pump before ignition and then the heat from the upper part of the nozzle made the steam self sustained.
So for a redesign I would start by finding an optimal wheel shape in a case. Find at what angle the nozzle has to hit the wheel for maximum efficiency. Then you need a sustained heat source and you need to think of the steam system as a heat sync. A radiator cooling system with low fluid level and the steam leaves the radiator where it connects to the pump them a condenser that will capture the steam and chill it back to liquid where it goes back to the heat sync. You will need a bit of plumbing g to do it but it is possible. But not 3d printing all of it unfortunately. You will need some copper tube or pipe for the liquid system
The steam would soften or melt the plastic engine, unless you cooled it down but that would create a vacuum. Maybe a vacuum powered engine then? Lol.
@@Convolutedtubules water boils at 100C there are several thermoplastics with a glass transition temperature above 100C and a couple go up to 160C. I can't remember their names off hand but I think PEEK is one of them. It would be an expensive experiment but it would make it possable... you can also anneal PLA and it raises the glass transition temperature from the 60 or so to above 100. Not impossible, just difficult
Such a cool concept! It would be fascinating if you controlled the amount of peroxide being released and used the steam from the reaction as some sort of turbine for a boat or something, you could propel the boat with just the pure steam, or use this steam turbine as like a boat propeller. Can't wait for your next video, I always love when they come out, keep up the great work!
It would be cool to see the steam powering random things that haven’t historically been steam powered, like a steam powered clock.
That's a really interesting and fun idea he should try.
Ohh good one! It could use a similar mechanism to that in grandfather clocks with multiple weights; when one runs down to the bottom it triggers the next to be released and that one takes over. In this case it would trigger a small steam engine to rewind the cogs and pull the weight back up to the top!
Wait,isn't there a steam powered clock in Vancouver,Canada?.
I have a (hopefully good) suggestion for a future video which utilizes this turbine and some other old projects : You could tab of some of the steam that is produced by the peroxide engine and use it to power the turbine. The power could in turn be used to pump the peroxide for the engine. This concept is called tab of cycle and is being used in real rocketry.(I really love the engine videos I would really appreciate if you made more of them)
It’s nearly like a turbocharged rocket! I like it
@@xmysef4920 thats exaclty what this is
yep, ''gas generator cycle'' if i'm not mistaken, some models even pump the turbine's exhaust into the main engine exhaust
@@k-osmonaut8807 often the exhaust is fed into the engine bell for film cooling, this is visible in Saturn V launch video
@@mikeawilliams7104 yep, the short dark color ''smoke'' in the exhaust flames, made by the fuel rich mixture the pump ran on
Video idea: please make a steam powered car or something else!
The concept of mixture metal powder into plastic and 3d print next is very fascinating i imagine you doing a lot of projects... keep up...
Another great video Integra!
You are missing one huge part of the steam engine. You need valve to control steam and pressure. With the high pressure water doesn't boil on 100°c, but when you have high pressure in the chamber and then realise it, water evaporates instantly and thats how you get high pressure, high speed steam :)
This video made me think about Tesla turbines. I've always wondered if it would be possible to 3D print a functional Tesla turbine, making every part (except the bearing you'd probably need for the hub) out of 3D printed parts. I feel like a resin printer would be PERFECT for such a project, and that such a creation would have the potential to reach incredible efficiency.
Regardless, the subject is fascinating.
Good stuff. I am a steam turbine engineer and this did my heart good to see!
I mentioned this idea in a previous video I'm glad you tried it
It would be cool to see that reaction power a small airplane or use the steam to power the propellers of one.
a cool idea would be to try making something using the luqid from a tomato to cause a chemical reaction that could be used for propulsion / pressure to lunch smaller tomatos to their doom
This liquide contains nearly nothing.
@@paulbecker7039 it is mostly water correct so technically it does have stuff that can react to it, I just think adding in the destruction of tomatoes and using the water inside of them would make for a cool video, yes it would be time consuming but hey we are talking about rocket science here
Video Idea: I wonder... could you produce enough pressure with that ultimate steam reaction to create something like a steam powered cannon!
And love your videos! Always innovative :)
Great video! You should make some power tools with all your compressed air engines and maybe do a comparison between all of them. I would love to see it 🙂
It would be really cool if you made a video about ionic propulsion.
Your videos and builds you make are ALL AMAZING Thank you for making Content!
I love your videos!
I, also, could not resist trying to stop it with my finger. Thank you for doing this at four minutes in.
I'd like to see you make a steam powered Tesla coil.
Hei Integza, I have a couple of ideas for you 3D printer free:
1- multifilament 3D. The 3D printers nowadays are kind of like black only ink 2D printer. With a multifilament 3D printer, you could use different property filaments to do more complex structures for your rockets;
2- For your V4-rocket, the previous idea would be amazing for implementing it. You could print the different components of the rocket in one go. This one is not an idea, but more the inevitable course of your channel. The sonner you accept it, the better for you. EMBRACE IT!
BTW, about the reactor component, second option would be better.
it's pretty hard (and expensive) to make your printer do multi material.
Ah blin its V2 not V4
@@dtylerb yes, but he's using resin...
Steam power is incredibly fun to engineer and work with. It requires some unique solutions that still use more mechanical parts and they are always visually appealing.
Your vedious are amazing. I wonder about your content about turbo engines , I have seen many videos about turbo engines but yours one is unique. Thanks for your content..
i think you should make a tesla coil (much much bigger than your current one) that can produce arcs over 515 cm........to celebrate your 515k subscribers. BTW congrats for your new achievement....................jai hind
I await the day he reaches a point where he combines all his ideas into one rocket and make it the best and fastest (relatively speaking) in the world and I’m all there for it
Haha would one stage be tomato powered?
@@Hamring I assume so, it would be epic
More Great fiddling from Integza !! Just a thought, I use the "Steam Engine" from a household steam mop, or Steam Cappuccino Froth Maker, for fiddling with steam, on a small scale ...
I need more rocket/jet engine stuff from you. Very interesting
After seeing your recent videos I think you can turn anything into a rocket fuel!
VIDEO IDEA: Since you have a lot of empty Co2 cartridges why don't you use as a tank for solid rocket fuel (for example the sugar one). With cartridges you can get a
nozzle simply by going to countersink the hole. The divergent part will be missing, you could perhaps weld, on the outlet of the cartridge, a bolt or any suitable piece
of metal and then countersink for make the divergent part of the nozzle.
he already made rockets from those cartridges tho...
Integza: *Builds steam turbine*
His Tesla turbines: We’re right here!
Great video, we van learn a lot from you
Video idea, show how each rocket you've made thus far destroys a tomato. I thunk it would be a fun and interesting way to show the thrust output for each rocket.
…
You deserve a 3D printer.
I've watched for a long time and I think that I have an idea for a future video: Building a turbofan. It's similar to building a turbojet, but turbofans are used on a lot of aircraft now, so it'd be great to see a 3D printed one in the same vein as the 3D printed turbojet. Great videos as always!
If I'm not mistaken, the power you can get from steam is generally from a sealed system where the steam is pushing a Piston, or the steam is being forced through an incredibly dense turbine that can absorb most of the energy of the flowing steam. A single cupped wheel open in the air doesn't quite do this. If the steam has a path to escape without providing you power, you're not using it to its full potential.
If you captured most of the energy of the steam, you probably could have lifted the apple using the pressure cooker.
Ok how about 3d printing a magnetic turbine, or somthing to that tune lol .
I'm really glad to have the opportunity to talk to you about this idea!
A project idea: Can you use the peroxide catalyst to generate steam for a 3d printed locomotive? I would love to see a ridiculously fast HO scale steam train.
Nifty!
Remember, for a catalyst, surface area is everything. So if you want to incorporate catalyst into resin, you must make sure the catalyst particles are exposed. You might need to do a solvent wash, or maybe bead blasting the surface. Good luck!
muito bem sigo te ha pouco mais de um ano e ver como o teu canal cresceu uau parabens
Holly shit. it's gonna happen. I've been waiting for him to take the step from pressure fed rocket engines to turbopump engines - which is basically exactly what was shown here. he would almost certainly start with open cycle tho.
As I mentioned in the last video:
An interesting project, and taking into account the approaching time, would be to make a launcher (similar to those used in shooting training) out of French toast frozen in LIQUID NITROGEN. 😃
Keep up the good work
🤖Please Integza, make a documentary about rocket's engine or maybe about first 3d printers(like something about its patent ).You have made videos with some really funny animation in the past, so I would love a video like this.Hope I'm not the only one .
Love your videos , thank you.🤖❤
That would be amazing!
I really enjoy your videos. You should 3d print some kind of mechanism to inject the peroxide with a servo or something. I really wish I had a 3d printer so I could do some of the things you do.. you keep me interested in everything you do. You do great work.
Bro I truly love this Chanel I watch and pay attention to you more then u think I dieing for a 3d printer I’m trying to figure out which one can do metal
Integza always does a great job of communicating exactly what it is like to engineer projects like this at home.
Other creators might have the clean workshops and diagrams and carefully deliberated lectures, some are whacky and zany but obviously know exactly what they're doing off-camera. But whenever I build something at home it will inevitably go exactly like an Integza video, including getting distracted by noodles.
Hey Integza, this design comes close to a pelton turbine i think.
I build one of these in a demonstrator for a project in my uni. The key here is to make the splitters in the blade as smooth as possible and try to hit the blades in a 90 degree angle if possible. Also you can use several nozzles on the same turbine to increase the torque. Measuring the torque while operating is pretty damn tricky. Also a good trick would be to use flange bearings for the shaft, so you can adjust the turbine axially to the nozzle. so you get more power out of it.
Im not sure how it is with gases, but for pelton turbines the nozzle itself is also an important faktor. They use special ones with something called a spear inside so they can shoot the water more in the center of the blade.
Hope this helps.
The best would be if it get operated in a a Chase
Vanadium Pentoxide might be another good catalyst to try - often used in ceramic catalysts and could impregnate similarly to the Permanganate.
Also considering the gas formed during decomposition is pure oxygen, adding a second stage with a fuel source (propane?) could make a perfect fuel/oxygen mixture, with the h2o that carries through keeping things cool(er), while adding to thrust with the additional steam generated.
You could use the peroxide + manganese reaction to pressurize a chamber, and then use it to do something after the reaction has occurred; this way, you won't fling the catalyst everywhere. An idea for you: use this chamber of pressurized steam to launch tomatoes at people! (only the most vile of projectiles, of course)
Suppose you mixed the manganese dioxide into a low-viscosity resin and blew an inert gas through it to create a rigid open-cell foam; this could serve as a solid catalyst to fill the reaction chamber
What about a Rocket Powered Tomato? Best way to smash a nasty tomato against a wall! 🍅💥🚀
Tomato Powered Rocket Tomato!
Great video thanks for sharing ,if you increase the number of nozzles and the size of the wheel it will increase torque .
My 6 year old son loves your channel, & so do I. So I ask him what he wants to see next on your vid, he said a lot of words but basically, steam+airplanes. 😅
Great vids! Keep safe!
Video idea: Make a video where u transform a 3D printer into a homework printer with a regular pen. U can record the way u write so that it can be exatually like your hand writing style.
for example u attach the pen to the printer and write "a" several times and record the coordinates it needs to follow or maybe u can record it with another method like using an ipad pen. Then when u give it a command to write "a" it will randomly choose one of the recorded coordinates for the "a" letter so that a doesn't look exatually the same every time.
Do this for every letter and u got a machine that can mimic your hand writing
An idea: complete the cycle of the steam engine. Collect the steam leaving the turbine, cool it down to water (radiator), and pump it back in the boiler. If the turbine can power the pump on it own, you made an actual engine that produces power.
Not possible, violates laws of thermodynamics
@@bella_ciao4608 I mean yeah, but for the sake of fun I think we can cheat a little and use gravity to assist the water getting to the boiler… Also it kind of has to be possible, even if somewhat convolutedly and indirectly, or otherwise pretty much no modern power plants would work. They have to be able to power their own pumps… otherwise you aren’t going to be profiting on power…
Edit: Yeah wait. I am dumb. It doesn’t violate the laws of thermodynamics as long as the boiler has a constant heat/energy source. You are constantly putting energy into the system, and water is super efficient to pump.
@@bella_ciao4608 the condenser system was actually used in various steam locomotive models in late 1800s and early 1900s, it would violate the laws of termodynamics if the guy was suggesting the engine powered it's own boiler
I would like to see you continue to push this concept and catalyst.
Thanks!
no tomato meme tho...
video idea: cook a hot pocket using a rocket engine
Love the videos not getting notifications
Hey, love the vids! Ibthinkbit would be inytesting to see if you can create a sustained reaction using any method of chemical reactions, and than use that to make fireworks!
it would be very interesting to see an opposing piston engine made of resin and lubricated with graphene
You could divert some of the thrust from the Devil's toothpaste to push more H2O2 into the porous matrix. As for the leaky connections, you can make a 3D printed mount for some strong rubber bands (around 9 to 10 to reduce the load on each rubber band) and use that to "push" the valve into the acrylic tube, it may reduce the chances of a leak or explosion.
I love my Ultragear ergo. Best birthday present for myself so far. :D
If you used a rectangular chamber with the input end at the bottom and the output at the top and also a larger volume chamber maybe you could get out a higher gas to liquid ratio. Love your videos, keep it up please.
Maybe a video Idea: Make a steam catapult! like the carrier one, if you have an RC plane that would be perfect! I know Emals can be done easier but it's Integza!
Rocket powered torpedo!
dude I love your videos keep up the good work please you should do a steam powered......train! powered by steam turbines of course!
Amazing 😱
Hey, great video.
I think you should make the catalyst like automotive catalytic converters. They have a ceramic mesh with impregnated catalysts. Maybe you could print one using those ceramic resins and just mix in some MnO2? It'd be awesome to see this happen!
With your design, its better to provide more sepatation between the reaction chamber and the outlet port. Being so close together and in a straight will force the reactants out with your desired product. There a few ways you can optomise this, the simplest being to have a round chamber with a vent at the top out of reach of the reaction. Another is to provide baffles to like in a fuel tank that dampen the movement of its contents while in motion. Another coukd be to moderate the rewction altogether by experimenting with flow rates of the reactions themselves whike adding. This last one is safest but not ideal for producing large volumes of steam/gas, unless you plumb multiple reaction cells together where each produces a little, but cumulatively provide a lot.
I normally hate it when people talk with food in their mouth, but for some reason it cracked me up this time. Integza, you sorcerer you!
You should keep the blooper reel at the end of your videos! I love it!
Future video idea: Steam powered submarine which uses the steam generated for both locomotion as well as depth control!!!
Idk about anyone else but I would like to see a setup with a rocket powered by this reaction, using compressed air to force the peroxide into the combustion chamber. I think that varying the pressure could lead to a more consistent reaction for repeatable tests. It would also be interesting to see a large scale version powering something like a bicycle. Love your videos
I think a Merlin Engine would really tie your latest videos together!
It uses the same Gas-generator combustion as the SpaceX rockets and has some nice advantages compared to other rocket engines you've made before. At the cost of some fuel efficiency, it has a simpler design and less complicated plumbing. These are some very nice advantages considering it's literally rocket science you're working with.
Anyway, I love watching your videos ^^
A steampunk themed video would be awesome. Like taking some half-fictional engine/device/vehicle, and trying to make it work. I always imagined you like a steampunk engineer. :D
This design can obviously be improved
Words to live by