In case you arent sure whats going on in the video. There are only 2 settings you need to adjust to get your SMP/Hydra/Inferno tuned. Dwell and ROF. Dwell is the amount of time the solenoid is open to allow air to flow. If it is open too long the bb has already left and you are pushing air for no reason - not very efficient and fewer shots per tank. You want it right on the bleeding edge between In the video the gun with the Spartan shoots about 335 regardless of how high the dwell is (because the bb has already left the barrel, so more air is simply wasted for no benefit)(also you adjust fps from the regulator, not the dwell). As Rich shoots 1 bb per second in programming mode by holding down the trigger, you will notice it doesnt change much for a few shots, then drops to 325. This is the point where the system is UNDER-powered, so you need to bump it back up a smidge by double tapping the trigger. The fps goes back up to 335, and at this point you know that your gun has a perfect dwell setting. And you can do it in under a minute. AMAZING.
hey whats up? met you down at Shelby last month and ended up with an inferno Spartan kit. I put it in a G&G Blazing hog and couldn't be happier. This thing is awesome.
Hey guys! Love your channel and your products! I have both a Reaper and a Hydra system from y’all. I’d like to get an Inferno for an AUG, but since it’s a dual stage trigger system, can I get away with Spartan electronics? If not, what do you recommend?
Hi guys, I have just brought one these and they are great fun to use!! How ever I am still trying to get to grips on how to change the FPS and ROF up and down. I have been reading the manual over and over but I can not make scene of it :/ any tips or is there another video maybe you could link ? Thanks for your time
+John Rogers Hi John! If you skip to 1:55 on this video, Rich explains how to program the ROF. It is also in section 4, step 5 of the user manual you received. As for the FPS, that is adjusted using your regulator. Change the PSI on your regulator to adjust the FPS, being careful not to exceed 140 PSI or go below 40 PSI
For some reason I'm not getting power to my unit..any tips? I don't see any tears/cuts in wires no burnt marks anywhere on the board..not sure if I need to buy a new board
Hi Denis, your dwell only controls how long the solenoid valve stays open, it typically should not be all the way up. Increase the PSI on your regulator to gain fps. Once you have the desired fps, follow the instructions in this video for setting the dwell.
With my inferno I'm shooting at 80 psi. When I tested my gun it showed up shooting 250 fps which is low right? Also I have a 6.03 tight bore in it. Is there a problem? If so what?
+aidan newsham Hey Aidan, there are many different variables that effect the fps, but that is lower than normal. Please email tech@wolverineairsoft.com with your build details and we can help you out.
Hey Wolverine Airsoft, You've found yourself another customer, but in purchasing this am I going to see a performance difference for the price?, also is there any problem installing it into my ARES Amobea, like polarstar, please answer.
+ThunderyBob - Gaming, Airsoft, Tutorials Good to meet you! No worries, the lower price does not mean lower performance. We use the same engine for the Spartan Edition as we do for our premium products. The price drop is due to having less electronics. With the Spartan, you don't have as precise tuning options as the premium or bluetooth FCUs, but it is much simpler.
+Álvaro Filipe dos Santos If you look on this map: wolverineairsoft.com/find-dealer/ We have a couple dealers near Lisbon, you can also order from us :)
+Ownya twice The Spartan Edition includes our integrated V2 trigger board and FCU using our Live Fire tuning. Premium edition includes our traditional FCU, Wire harness, trigger board, and battery.
+Tyler Huynh There is no performance difference, the price drop comes from our savings for not having to supply as many parts. We did not limit the performance just because it is less expensive :)
In case you arent sure whats going on in the video.
There are only 2 settings you need to adjust to get your SMP/Hydra/Inferno tuned. Dwell and ROF.
Dwell is the amount of time the solenoid is open to allow air to flow. If it is open too long the bb has already left and you are pushing air for no reason - not very efficient and fewer shots per tank. You want it right on the bleeding edge between
In the video the gun with the Spartan shoots about 335 regardless of how high the dwell is (because the bb has already left the barrel, so more air is simply wasted for no benefit)(also you adjust fps from the regulator, not the dwell). As Rich shoots 1 bb per second in programming mode by holding down the trigger, you will notice it doesnt change much for a few shots, then drops to 325. This is the point where the system is UNDER-powered, so you need to bump it back up a smidge by double tapping the trigger. The fps goes back up to 335, and at this point you know that your gun has a perfect dwell setting. And you can do it in under a minute. AMAZING.
Great explanation and undervalued comment. Thanks!
You’re the man
Wow. Super fast setup.
hey whats up? met you down at Shelby last month and ended up with an inferno Spartan kit. I put it in a G&G Blazing hog and couldn't be happier. This thing is awesome.
Ooh Sweet baby Jubus.
damn that is a good price. looks like i found my daytona backup
Hey guys!
Love your channel and your products! I have both a Reaper and a Hydra system from y’all. I’d like to get an Inferno for an AUG, but since it’s a dual stage trigger system, can I get away with Spartan electronics? If not, what do you recommend?
Gen II superb! Gen I big nay...
I was wondering what would be the next psi and settings my bbs drop really early
Hi guys, I have just brought one these and they are great fun to use!! How ever I am still trying to get to grips on how to change the FPS and ROF up and down. I have been reading the manual over and over but I can not make scene of it :/ any tips or is there another video maybe you could link ?
Thanks for your time
+John Rogers Hi John! If you skip to 1:55 on this video, Rich explains how to program the ROF. It is also in section 4, step 5 of the user manual you received. As for the FPS, that is adjusted using your regulator. Change the PSI on your regulator to adjust the FPS, being careful not to exceed 140 PSI or go below 40 PSI
+Wolverine Airsoft really helpful thanks :D
For some reason I'm not getting power to my unit..any tips? I don't see any tears/cuts in wires no burnt marks anywhere on the board..not sure if I need to buy a new board
Does the spartan edition ship with a battery?
I want these hpa systems from wolverine airsoft but in Germany it is so difficult to get one and get it legally installed...
Wish it still only costed less then $300
Does it still 285 ? 😁
How do I add burst fire in replacement of the safety switch?
Hey bro that's illegal XDD
If the dwell is at its highest and I don't achieve my desired FPS would I just have to increase the PSI to increase the FPS?
Hi Denis, your dwell only controls how long the solenoid valve stays open, it typically should not be all the way up. Increase the PSI on your regulator to gain fps. Once you have the desired fps, follow the instructions in this video for setting the dwell.
Hello!
Does the Inferno: Spartan Edition drop right into and shoot in a V.3 gearbox without any changes?
+Davvisth No, the Spartan edition is V2 only. The Premium edition works with V3!
how do you reset your RoF because at my local site they have a limit for it.
thanks
matt
+matt rogers says in the video :)
285 dollars( Kit)?
With my inferno I'm shooting at 80 psi. When I tested my gun it showed up shooting 250 fps which is low right? Also I have a 6.03 tight bore in it. Is there a problem? If so what?
+aidan newsham Hey Aidan, there are many different variables that effect the fps, but that is lower than normal. Please email tech@wolverineairsoft.com with your build details and we can help you out.
Will it be able to handle about 40 ROF ?
+tvdave1 Yes!
Hey Wolverine Airsoft, You've found yourself another customer, but in purchasing this am I going to see a performance difference for the price?, also is there any problem installing it into my ARES Amobea, like polarstar, please answer.
+ThunderyBob - Gaming, Airsoft, Tutorials Good to meet you! No worries, the lower price does not mean lower performance. We use the same engine for the Spartan Edition as we do for our premium products. The price drop is due to having less electronics. With the Spartan, you don't have as precise tuning options as the premium or bluetooth FCUs, but it is much simpler.
+ThunderyBob - Gaming, Airsoft, Tutorials and no, you shouldn't have any problem installing this into an Amobea
Thank You very much, Yet another happy customer.
Can I swap the nozzles on this and can it shoot up to 450 FPS with a .20?
+Arbin'sGaming&Airsoft There's no need to swap nozzles, with any of our systems the stock nozzle is capable of acheiving a full range of velocities.
I hold the trigger down and nothing happens after the first shot, please respond
Guardian Milsim. Your on semi
John Shin 😂😂😂
Is it hpa?
speedqb_adam Yes it is :)
how can i get it in Portugal??
+Álvaro Filipe dos Santos If you look on this map: wolverineairsoft.com/find-dealer/
We have a couple dealers near Lisbon, you can also order from us :)
+Wolverine Airsoft thanks a lot guys!! :) one more costumer, amazing system!
I keep looking around but I can't seem to find out. What is the difference between "Inferno Spartan Edition" and "Inferno Premium Edition?"
+Ownya twice The Spartan Edition includes our integrated V2 trigger board and FCU using our Live Fire tuning. Premium edition includes our traditional FCU, Wire harness, trigger board, and battery.
+Wolverine Airsoft is there a performance difference between the two? or no
+Tyler Huynh There is no performance difference, the price drop comes from our savings for not having to supply as many parts. We did not limit the performance just because it is less expensive :)
Wolverine Airsoft didn’t you say the max rps on spartin is 35 and the premium is 55-60 on another comment though...?
What is Dwell?
It's the amount of time the valve is open, which in turn determines how much air is supplied to shoot the bb.
Oh ok thanks
how do I get my Spartan out of 3 round burst?
Hi Steve, Hold down the trigger for 10 seconds while your gun is in semi.
Wolverine Airsoft do the same when it is 3 round burst on full auto?
Wolverine Airsoft i have a gen 2
How do you program the RPS? Is there just a knob you turn
+Jay Yang Are you talking about FPS? That is adjusted through the regulator. If you are talking about ROF, that is explained in this video.
+Wolverine Airsoft yes I meant fps, thank you
+Jay Yang Whats the highest rps it can go?
+Fire Edge 55 for premium and 30 for inferno
+Jay Yang Thanks
Whats the max rps with this?
I think 50 or 55
can this get to 50-60 rps with 400 fps?
+PowersuitJedi the Spartan maxes out at 35 rps
+PowersuitJedi but the premium version goes up to 55 rps
alguien puede explicar esta wea en español?
I'll take 56