10 Awesome & Useful Drill Bits !!!
Vložit
- čas přidán 12. 09. 2024
- DIY: Amazing drill bit set you should buy
1. Flat bit Set: bit.ly/2XNfWLV
2. Countersink Drill Bit Set: bit.ly/2KZoxVN
3. Hex Shank Bore Hole Twist Drill Bit: bit.ly/2FTW3IR
4. Metal Flexible Extension Drill Shaft: bit.ly/2xv1vxp
5. Damaged Screw Bolt Extractor Drill Bits: bit.ly/2Xst8X7
6. Shank Rotary File Drill Bits: bit.ly/2FSTaIC
7. HSS Circular Saw Blade Set: bit.ly/2JcUTKB
8. Step Drill Bit: bit.ly/2JsLHAI
9. Self Centering Hinge Drill Bit: bit.ly/2Je7HRd
10. Hex Shank Countersink Drill Bit Set: bit.ly/2RYgs4r
Coupon: 15%off: www.banggood.i...
Warning: Do not perform any experiments shown here without the supervision of an adult. This is done by Expert.
Coupon: 15%off: www.banggood.i...
Finally see someone that knows what all three holes are for in a drill chuck
I know. Proper technique lmao
Seems like the first time you have used a lot of these items. Either that or you are learning as you go. The bits all have an intended purpose which you have yet to master young Padawan.
Slow that rocket drill down when using screw extraction.
Don't use your step drill on materials thicker than the height of each step.
Try making a table (Table saw) for those circular saw bits, before it digs in and does real damage.
UTM
UTM?
Sorry mate, I don't know what that is for.
Utter Tool Madness?
Under The Mattress?
Understanding My Tools?
I tried!!!!!!
@@davoz73 possibly use the manual, which means the other commenter is agreeing with you.
I only inferredhis from rtfm though, so take it with a grain of salt.
@@Archaeologiker
Thanks mate. You may be right.
You have taught me something new and I appreciate it. Honestly, I didn't have a clue. Makes sense though!
Why do these presenters have terrible music playing. Why Don they talk
At least he's got the tools to fuck around with in the first place.. 🤖📐🛠 nice 📽
Honeeeeey!.....kids been playing with the video camera and my tools again!
My favorite part of these videos is scrolling down to the comments to see the “you’re using it wrong!” comments hahahah
Like clockwork...
What if I told you... he IS using them wrong.......
Because he is
Some expert this guy is.
The step drill bit is mostly used for metal sheets
Mmm. And maybe round mortices.
You don't EVER get to play with my tools. You managed to misuse every single one.
Notice the technique whhen tightening the Chuck XD
I would love to see that black and decker drill push an auger bit that big
अच्छा लगा धन्यवाद जी 🙏🌹💕🇮🇳👌🇮🇳👌🙏
I enjoyed your video and I inspired thank you very much
Tools so old you’ve forgotten they still exist
On the first bit shown I would definitely use a drill press, canked and out of round holes are worthless
Problem with using drill press is that the threading portion would pull the bit down through the material...hand drill is better. Better still would be to drill the pilot hole with drill press and thread hole with proper threading tap. There is no need for that kind of drill bit unless you are mass producing something and even then there are better ways.
U still got the drill in reverse from extracting that damaged screw ?
Very good)
mostly old stuff been around for years
"I've never even seen a DRILL before, so this was really something" - Hillybilly Tex
so nice
Augers should be used on low settings. Lower settings have greater torque.
Brilliant good video
The rarest item on this vid... the key chuck!
Hey, my keyed chuck angle-poise drill gets in tighter spaces than my keyless chucked one does.
Step bits are for sheet metal.
I dont believe youv'e seen or used any of them before
Kind of a d baggy comment, but I will say the channel is definitely a clone if another channel.
@@Idontknowmaybejohnsmith In a word shite and as a engineer I can say that!
This was made in 2019 about tools that pre date time.
Good Amazing Tool
Well, it is true some of those drill bits are useful (at least, quality versions of them are), but they're not exactly new inventions. Others look like great ideas for people who find 10 digits just too many.
very godd nice usful tools
this video is great
Very good
Great video Junkyard! :)
All you need is add two rings at bottom of drill bit and connect to ray electricity generator then press the button it would shoot the twisted ray
i dont use a extractor bit but i can extract broken screws by making them flat head
You forgot Forstner bits. If you want a nice clean large hole that doesn't go all the way through your work (without the center guide drill punching through) then use a Forstner bit.
Erm, maybe might want to specify that the step bit is meant for metal, so you dont need to work your way up drill bit sizes to avoid the metal getting to hot
س شوو
Really awesome.....!
Isn't a step down bit for metal?
You are Great 😊💞
You didn't include Forstner bits and hole saws which just as awesome as the others
"This is done by expert" LMAO
It's not very often that I find myself agreeing with every single derisive comment of a video. You should reflect about that.
How is it that the drill bit used for a hand drill was put in the drill press but the drill bit meant for a drill press was put in the hand drill
This video creator demonstrates precisely how his amount of callouses is equal to the amount of knowledge- nearly zero.
zachary holbert He put a Dremel bit in a drill
Hi, nice video... Could you tell me where can I buy the drill stand you use with the drill bit no. 1(the last one)?
Had all of these for years son!! Come on show us something new.
Ever stop and think that other people haven't seen these
@@spaghettisauce2773 .. No! That vid was as much use as Watching someone eat an apple..
You have to admit the apple looked tasty
@@spaghettisauce2773. I actually fancied one after.
Nice
Do they sell these in America?
The saw one that he has unless it is bolted down and use as a maybe table saw i say dont use then I have it jumped and cut my thumb has to get 6 stitches.
Espectaculares!
Not seen anyone use a keyed chuck on their drill for many years
Muy bueno felicitaciones por la ℹ
Yeah, nah. That step drill bit would usually be used on sheetmetal.
Amazing, isn;t it, how these chinese drills are blunt and almost useless straight out of the pack.
so helpful video
can flat drill bits used in masonary purpose?
Here's a trick.. If u don't have a countersink drill bit, just use the screwdriver drill bit to make the hole..
Nice that you show the name of the devivpce
The flat bits seemed very blunt, they should have whizzed through the ply and mdf
As a trades person, i watched this with the intention of either finding something useful or laughing at some horrendous gadget, turns out i just watched and cringed like i was watching the customer try and 'help out' 😬
Interesante los inventos para a serlo uno mismo .
At least he didn't loose an eye!
*Nothing comes up when you click the Hex Shank drill bit.*
accelerating the video to make it shorter is a good idea, but sometimes you shouldn't do it, because it is important to see, that some of the bits needs a very slow rotation speed.
Nice all
#3 for boring wood, okay for shallow holes in soft materials, but nowhere close to Milwaukee Hole Hawg & auger for deep holes in framing. #1 flat bits have their places and ability to drill a curved hole but not as good as Forstner bits.
Editing (10), Music (10), Picture quality (10) Actual use of tools!? (0) :( read instructions from all packages and remake it and will be a very useful video stay cool... cheers!
This can deploy gamma ray, to microwave, to thermo extraction or injections
Is this video 25 years old? I mean seriously dude, ALL of these tools have been around for decades lol.
These are the same bits from the last video just in backwards order and used on different metals.
Don’t quit your day job, sorry old stuff just to do the same thing we’ve done for years
में मिभी कारपेंटर हु पर मुंबई शहर में इस तरह के विदेसी मसीन बिट मिल जाये तो कितना अछा होता बाजारों में मैने अब तक नही देखे गये है इस तरीके मसीन टूल्स
I see a lot of wrong way to use these tool in this video like the last of video
That drill cant be used in plastic wood
There is lots of smoke and the drill must be broken
Circular aari कितना इंच का है और क्या market मे मिलेगा
I just invented the wheel!
Einstein of India
wow i never tightened a drill chuck using all 3 holes
sr g yah mokaml tool mil sakta ha
what's the music @ 7:50 mark?
I"ve gone all twitch eye at that rusty drill chuck :(
Acessórios como estes não se encontra por aqui triste
А, что так дёшево? Резьба на дюрали. Металл, слабо?
Lol It says in the description "done by expert" HAH
Well, compared to everyone else in his village, he IS an expert =)
Otimas ferramentas mas a maioria das pessoas não sabem o nome nem onde adquiri-las.
Então não passa de um filme mudo.
Drill speed to fast on damaged screw remover
اغلب هالاشياء ماتنباع عندنا
Mấy mũi này hay nè
Like por la hormiga en el minuto 2:03
Ya, this guy knows nothing about what he is doing.
Muito bom
Perfeito 👏
By learning by his mistakes we are still indeed learning.
The thread is a bit over-size.
A critics paradise
Was this filmed 20 years ago???
Cheap bits and someone don't know how to use them mades it worst go figure?
Where the hell did you get a metric-threaded screw with a slotted head? And why did you bother?
用途が広がるね👍
What's up with the ear shattering volume changes?
1 СВЕРЛИТ В ОДНОМ КУСКЕ ВКРУЧИВАЕТ В ДРУГОЙ
Osam video
Someone (mother in law) gave him a wedding present. He is supposed to make a living using it! And he don't seem to know!
Really nice tools