I've got a special place in my heart for the 3V 4.6s. Specifically your car and Four Eyes car. You two guaranteed own two of the best S197s on CZcams (IMO). I own one, and the one thing I can say is the best about the 3Vs is the sound. I LOVE the sound! One of the best sounding car models out there for sure. Also, the car is a great example of a muscle car, especially if you're equipped with 4.10 gears and a manual transmission, you really get that old school muscle feel! Unfortunately, with all the problems my car has (and a lot of other people as well, auto or manual, high mileage or low mileage), this car just isn't worth the money to me. Now DON'T GET ME WRONG... if you are able to find and buy a low mileage, single owner car that has been babied and garage kept, all maintenance kept up, you're in luck, and you'll have yourself a great car. But even so, I've met a couple people that had transmissions go out, misfiring problems without any codes, or throttle bodies going bad under 75K miles. With these cars it's really a gamble on buying one that isn't broken from factory. You either get a good one or you get a bad one. I unfortunately got a bad one. But it's a 4 owner car that's been through 5 states, beaten the shit out of (clearly by the previous owners absolute idiocy) with 173K miles on the dash now. I should be grateful it still runs. Sadly, I find it REALLY hard to justify putting thousands of dollars into the car to fix it, especially when it's coming up on 200,000 miles and these cars don't make it past 250,000. I'm looking at a $1000 transmission rebuild (still drivable, even raceable, but really shitty feeling of a transmission with a bad 3rd gear), $700 timing kit (recommended to be replaced around 175K miles), $500 clutch kit, absolute shit brakes that nearly kill me in desperate need of upgrade which is roughly $500, $300 set of fuel injectors, and $300 cold air intake because mine continues to give me problems. Also short throw shifter is $300, but that is not a necessity, just a want for daily driveability because the stock shifter for the TR-3650 is seriously sloppy, clunky, and a terrible experience to drive with. But not a necessity per say so let's scratch that off. To get to the point, if I want to get my car back to the 3V glory, back to running strong, back to being fun for goodness sake, I'm looking at over $3000. And I still owe $5000 on my loan because I idiotically decided to finance a car that had 159K miles on it (at the time of purchase) with all the problems it had lol. So $9000 car, already spent $1000 in maintenance and repairs so far, need to spend $3000 to get it back to normal, I'm at $13000 for a car that barely makes 290 WHP (after CAI, exhaust and tune) and most 1st Gen 5.0s are going for around $15K. I simply can't justify that. I could've put my $2500 down payment on a 5.0 and got 380WHP STOCK, more reliable, less mileage, less problems, better interior, 6th gear, better brakes, still shitty transmissions. But what can ya do? Yes I would be paying an extra $200 a month on car payments and an extra $100 on insurance, but hell at least I'm putting it towards that and not repair costs.... SHIT, this is a REALLY long, almost useless comment, and I feel like I kinda just vented my problems and hate for MY specific car, but man oh man. I LOVE these 3Vs, but with my lifestyle, this car ain't for me. There's so many better options out there for slightly more money. If I had thousands of dollars to put into this car, I would buy a used low mileage engine, a T-56, build the engine, supercharge that bitch and I would own one of the baddest, best cars out there, but I'm not rich and that's not a realistic expectation lol. I'll just sit down and watch your videos and enjoy that 3V content from behind the computer. Thank you 😂
It's a long comment but you summarize the dilemma that us 3v owners all face. Well said, it just means you have a good head on your shoulders understanding how expensive it is to build one of these cars and how much needs to be done with them. At the end of the day you pour thousands of dollars into a depreciating asset. Financially it doesn't make sense, but maybe for those brief moments driving that machine that you built it's worth it🤙🤙
@@CamMarz people that build these don’t do it for cost efficiency, they do it because they love it. Because of the love for the 3V. Because of their passion for cars and love for what they created. I respect all those people. That’s why we’re all car people isn’t it? For the joy cars bring us? I just wish it was a little bit less expensive of a hobby lol.
Glad we got some recognition for Four Eyes. Im gonna be building my new 3v with 84k miles just like his, I even made my own spreadsheet to keep up like he did. i cant wait
I have the 3v & I just put a new engine "Boss block stroked" new transmission 6 speed GT500, all the cooling mods with Afco and Vmp, & everything else u stated also. Mine is a SC Saleen. Currently being put together should be done next week. You don't want to know how much money I dropped but you have a nice ride & set up. PS Stay away from Brenspeeds B326! Lasted 2 months & threw a rod. Bad build on their part they refunded me but still cost me thousands on labor & replacing one of my heads. Hard lesson learned.
@@CamMarz That’s disappointing to hear since they are one of the few shops who still focus on the 3 valves. I’ve always dreamed of sending my 2008 to them one day.
@@GA08GT478 I'm sure they have plenty of satisfied customers as well too, you only hear the bad experiences when your on the internet for the most part🤷♂️
I'm doing modern restoration to my 09, has 32k original miles on it. all it needs is hoses replaced, coolant flushed, those door pieces glued on (I really need to figure out who sells a GOOD glue and yeah I know about 3M I use that on my apholstery in my vw bug), and the rear all around the rear window should be re-painted just to save it from rusting, no rust on mine at all tho' I will have to touch up paint it or get it re-painted. I found a shop that actually will do the job after searching for a little while, most shops won't even give me an estimate.
Damn, I miss my modded 07' manual GT. Traded it for a 2016 GT and when I modded that one it didn't sound as good if you know what I mean. Somebody hit me head on in that 2016. I'm glad I survived that and now I have a modded 2012 GT. Good God I love this one! Yellow blaze on a sunny day looks great and sounds great...
FYI on the door panels... I had a friend cut some 4-way stretch marine vinyl and used some Landau HHR adhesive. The stuff doesn't move. Hope it helps at an upholstery shop!
Buy some hard plastic door panels from Coverlay! Probably the most recommended/best solution to that issue. I’ve had mine for over a year and I have zero complaints
The stock auto trans isn’t garbage they’re like the engine they can only handle so much before giving up like the stock engines connecting rods c’mon you know that
2006 Ford Mustang Gt Convertible with Procharger supercharger with a 3.40 pulley on the supercharger,Ford racing intake manifold and 62mm throttle body with Flowmaster outlaw cat back exhaust owner here, Dude! You should really change out both the intake and throttle body. It cost me at the time 1500 from American muscle and it complements the Procharger big time! I'm getting my pony tuned in 2 weeks, so I'll have actual numbers soon.
So ran into a slight issue, I need a bigger fuel pump! Just got off the dyno and right now I'm sitting @ 439 horsepower with 432 foot pounds of torque. According to the data that we're looking at, the fuel pump is cutting out at 5800 RPMs at 10 lb of boost. So until I replace that I can't get the numbers I would really like and if I were to push it I could blow the motor up.
As you went through your mods, I found myself saying "I have that". I did miss the type of cams you have. I also have the 60# DeatschWerks injectors, aluminator shortblock,but pretty much everything else is similar. I do have to 5 speed, no auto for me. I have the Vortech V3 HO kit, stock pulley I think is putting out around 12psi. I got 741/663 out of it. I am running the 127650 cams, heavy springs, but keep dropping valves. First was #6, then #5 after rebuild and 800 miles. So, so far I have not had the luck you have had, it is currently broken down now, about to reassemble this month.
That's a badass build! You might need some new retainers or guides for the valves potentially, because the heavier springs can only do so much. Are you revving really high? Cause normally 3v's don't have any valve issues until they start floating past 6500
@@CamMarz cams are good to 7100-7200. The actual valve trumpet is what is breaking. Almost like piston to valve contact but the timing is spot on. Also, I am using Comp cam limiters, not the lockouts. I have spoken to Comp numerous times and no one can/will help. These cams require these springs.
@@CamMarz No doubt. The guides are super loose after I tore it down also, they were perfect when assembled. There is plenty of oil pressure, even have a gauge ON the heads to verify oil pressure at that point. ALL oil channels have/had been brushed and cleaned. Just don't know, I did a break down on my channels, check it out, maybe you will see something that I am missing that could be the problem. Thanks.
I’ve been looking for an S197 for a swap setup. I have a 2005 Thunderbird I want to throw the engine/transmission in. A mellow exhaust paired with the hot rod cams, a “cheaper” build-for the moment. I got a 5.0 in it at the moment, but if I’m being honest the 5.0 sound just isn’t “me”.
Nice built I have 98 gt 5 speed needs paint job full tune up and after that is done I'm gonna put cams gears throttle body and change the cylinder heads if I make around 300whp I'll be happy
Hey, man. Great video. I love how you kept the exterio simple and super chsrged it conservatively. Why did you go with smaller wheels in the front and not the same size all away around?
In retrospect, no. But it's always a good idea to have as many gauges as possible to diagnose any potential issues. Plus a boost gauge is cool to look at😂
It costed about 2800 but it all depends on how you do it I installed the trans and driveshaft myself and ran the wires but I sent it to the shop to get wired and programmed with addition to adding the 13-14 shifter as well you can notice the difference right away especially with the torque and throttle response
I'm jealous but at the same time I see that half the engine bay is zip tied together which sold me on the Paxton Novi 2200 setup instead, seems the ProCharger kits don't fit very well in these cars :/
My engine makes a clicking sound when I haul ass on the interstate eventually it goes away have you ever heard of this? It's done it since I bought it in November 04. Any help on what this is?
It could honestly be alot of things. More than likely its valve train related, such as the phasers, rocker arms, lifters etc... Could also be time for a timing job, like ur tensioners. An exhaust leak or maybe even a pulley too, but unlikely.
If you scrape that crap ass foam off and clean that panel the leather will adhere to the door like its suppose to. I had the same issue in my 3V when I had it. Would recommend Gorilla glue as well lol worked for me :)
You should check out my turbo build of my 3V. Just a little street car. Nice build on your car as well. switch over to a Holley and wake that thing up for sure.
So many things wrong with this setup...oh my God. I can speak cause I'm a Ford mechanic of 22+ years and I'm SVT Certified. But, it's on CZcams so it must be accurate and right and I'm wrong 😂😂😂 As far as the 5R55S goes, those are good transmissions up to 100k without proper service, you service it, it can last forever. You have a supercharger and that's why it needed rebuilt twice.
22 year old throwing parts at a car, yeah I probably did make mistakes looking back at it. Won't ever get over the 5r tho, got a Vette with a tr-6060 and 0 issues ever
I've had them since I was NA, and I didn't really feel any difference power wise. However it feels alot better with the butterfly plates gone. It takes away that weird throttle you get sometimes.
How's the noise on the highway with the 3.73s? I have an auto with a paxton and I want to swap out to 3.55s or 3.73s but I drive on the interstate a lot; so I don't want to be more deaf than I already am.
Prices are definitely inflated right now for vehicles. If it's a private sale, that's too much. If you're buying from a dealer, that seems about what they would ask for it. The 09 iteration of these cars is arguably the best because they snuffed out most of the problems that these cars had in the earlier years of production.
The crazy thing you could have found a car with most this junk already done for not much more than what you paid for this car and saved $20,000. And it was nutty to spend all that money and not upgrade the brakes and stereo. At least paint the brake calipers. Seems like he left off the cost of the painting too, so add $1000 for that. And the labour for installation.. thats probably a few thousand more.
Sorry to hear your transmission has given you so much trouble. I have an 06 with an auto not any problems with the transmission. I am boosting soon I'm waiting on supercharger to be built and shipped.
There's some people that never have a single issue with their autos! Which always surprises me cause I've always had so many issues with mine. What supercharger are you picking up?
@@CamMarz oh ya I'm so excited but terrified because I know I'm going to burn rubber so easy. What's it like is it hard to drive does it burn rubber in all gears?
There is a reason why people yank those out and slap in a 4r75 tranny in them lol. I also hate to say this. However tci isn't the best transmission brand either.
Camaros are actually better to build better transmission and egines that make more power. A cammed fbo camaro ss is pushing 500 hp vs 370 on the mustangs
Your trans rebuilder has no idea what he’s doing. My brother is on 15psi kenne bell and w a 3200 tci stall, and the hardened input shaft w boosted shift pressure in the tcm he beats it daily and it’s held for months. My dad sprays over 300 on his also he’s fbo and his holds
I've got a special place in my heart for the 3V 4.6s. Specifically your car and Four Eyes car. You two guaranteed own two of the best S197s on CZcams (IMO). I own one, and the one thing I can say is the best about the 3Vs is the sound. I LOVE the sound! One of the best sounding car models out there for sure. Also, the car is a great example of a muscle car, especially if you're equipped with 4.10 gears and a manual transmission, you really get that old school muscle feel!
Unfortunately, with all the problems my car has (and a lot of other people as well, auto or manual, high mileage or low mileage), this car just isn't worth the money to me. Now DON'T GET ME WRONG... if you are able to find and buy a low mileage, single owner car that has been babied and garage kept, all maintenance kept up, you're in luck, and you'll have yourself a great car. But even so, I've met a couple people that had transmissions go out, misfiring problems without any codes, or throttle bodies going bad under 75K miles. With these cars it's really a gamble on buying one that isn't broken from factory. You either get a good one or you get a bad one. I unfortunately got a bad one. But it's a 4 owner car that's been through 5 states, beaten the shit out of (clearly by the previous owners absolute idiocy) with 173K miles on the dash now. I should be grateful it still runs.
Sadly, I find it REALLY hard to justify putting thousands of dollars into the car to fix it, especially when it's coming up on 200,000 miles and these cars don't make it past 250,000. I'm looking at a $1000 transmission rebuild (still drivable, even raceable, but really shitty feeling of a transmission with a bad 3rd gear), $700 timing kit (recommended to be replaced around 175K miles), $500 clutch kit, absolute shit brakes that nearly kill me in desperate need of upgrade which is roughly $500, $300 set of fuel injectors, and $300 cold air intake because mine continues to give me problems. Also short throw shifter is $300, but that is not a necessity, just a want for daily driveability because the stock shifter for the TR-3650 is seriously sloppy, clunky, and a terrible experience to drive with. But not a necessity per say so let's scratch that off. To get to the point, if I want to get my car back to the 3V glory, back to running strong, back to being fun for goodness sake, I'm looking at over $3000. And I still owe $5000 on my loan because I idiotically decided to finance a car that had 159K miles on it (at the time of purchase) with all the problems it had lol. So $9000 car, already spent $1000 in maintenance and repairs so far, need to spend $3000 to get it back to normal, I'm at $13000 for a car that barely makes 290 WHP (after CAI, exhaust and tune) and most 1st Gen 5.0s are going for around $15K. I simply can't justify that. I could've put my $2500 down payment on a 5.0 and got 380WHP STOCK, more reliable, less mileage, less problems, better interior, 6th gear, better brakes, still shitty transmissions. But what can ya do? Yes I would be paying an extra $200 a month on car payments and an extra $100 on insurance, but hell at least I'm putting it towards that and not repair costs....
SHIT, this is a REALLY long, almost useless comment, and I feel like I kinda just vented my problems and hate for MY specific car, but man oh man. I LOVE these 3Vs, but with my lifestyle, this car ain't for me. There's so many better options out there for slightly more money. If I had thousands of dollars to put into this car, I would buy a used low mileage engine, a T-56, build the engine, supercharge that bitch and I would own one of the baddest, best cars out there, but I'm not rich and that's not a realistic expectation lol. I'll just sit down and watch your videos and enjoy that 3V content from behind the computer. Thank you 😂
It's a long comment but you summarize the dilemma that us 3v owners all face. Well said, it just means you have a good head on your shoulders understanding how expensive it is to build one of these cars and how much needs to be done with them. At the end of the day you pour thousands of dollars into a depreciating asset. Financially it doesn't make sense, but maybe for those brief moments driving that machine that you built it's worth it🤙🤙
@@CamMarz people that build these don’t do it for cost efficiency, they do it because they love it. Because of the love for the 3V. Because of their passion for cars and love for what they created. I respect all those people. That’s why we’re all car people isn’t it? For the joy cars bring us? I just wish it was a little bit less expensive of a hobby lol.
@@noahbolt Exactly, and yes it would be nice if it wasn't so expensive 😂
Glad we got some recognition for Four Eyes. Im gonna be building my new 3v with 84k miles just like his, I even made my own spreadsheet to keep up like he did. i cant wait
@@autopilots hell yeah!
I have the 3v & I just put a new engine "Boss block stroked" new transmission 6 speed GT500, all the cooling mods with Afco and Vmp, & everything else u stated also. Mine is a SC Saleen. Currently being put together should be done next week. You don't want to know how much money I dropped but you have a nice ride & set up. PS Stay away from Brenspeeds B326! Lasted 2 months & threw a rod. Bad build on their part they refunded me but still cost me thousands on labor & replacing one of my heads. Hard lesson learned.
I actually have a buddy of mine who also went thru brenspeed and had a bad experience 😂
@@CamMarz That’s disappointing to hear since they are one of the few shops who still focus on the 3 valves. I’ve always dreamed of sending my 2008 to them one day.
@@GA08GT478 I'm sure they have plenty of satisfied customers as well too, you only hear the bad experiences when your on the internet for the most part🤷♂️
I'm doing modern restoration to my 09, has 32k original miles on it. all it needs is hoses replaced, coolant flushed, those door pieces glued on (I really need to figure out who sells a GOOD glue and yeah I know about 3M I use that on my apholstery in my vw bug), and the rear all around the rear window should be re-painted just to save it from rusting, no rust on mine at all tho' I will have to touch up paint it or get it re-painted. I found a shop that actually will do the job after searching for a little while, most shops won't even give me an estimate.
For sale ?
Damn, I miss my modded 07' manual GT. Traded it for a 2016 GT and when I modded that one it didn't sound as good if you know what I mean. Somebody hit me head on in that 2016. I'm glad I survived that and now I have a modded 2012 GT. Good God I love this one! Yellow blaze on a sunny day looks great and sounds great...
FYI on the door panels... I had a friend cut some 4-way stretch marine vinyl and used some Landau HHR adhesive. The stuff doesn't move. Hope it helps at an upholstery shop!
Thanks for the suggestion!
Best looking Mustang generation by far.
Definitely slept on!
Always keep your engine bay spotless!
Buy some hard plastic door panels from Coverlay! Probably the most recommended/best solution to that issue. I’ve had mine for over a year and I have zero complaints
I think I will! Screenshotted, thanks for the advice
I have those too, absolutely love them
I’ve been trying to stop putting money into my 3V, but look at the type of videos I keep ending up on...
😂😂😂 it'll definitely get expensive quick if you keep going that route
The stock auto trans isn’t garbage they’re like the engine they can only handle so much before giving up like the stock engines connecting rods c’mon you know that
2006 Ford Mustang Gt Convertible with Procharger supercharger with a 3.40 pulley on the supercharger,Ford racing intake manifold and 62mm throttle body with Flowmaster outlaw cat back exhaust owner here, Dude! You should really change out both the intake and throttle body. It cost me at the time 1500 from American muscle and it complements the Procharger big time! I'm getting my pony tuned in 2 weeks, so I'll have actual numbers soon.
That's gonna be sick bro! Those numbers should be impressive 🤙
@@CamMarz ....I hope so!....🤘
So ran into a slight issue, I need a bigger fuel pump! Just got off the dyno and right now I'm sitting @ 439 horsepower with 432 foot pounds of torque. According to the data that we're looking at, the fuel pump is cutting out at 5800 RPMs at 10 lb of boost. So until I replace that I can't get the numbers I would really like and if I were to push it I could blow the motor up.
@@joshuabennett5891 I've got a walboro 400 in mine and I'm nearly maxed on 8lbs!
@@CamMarz . So any recommendations?
As you went through your mods, I found myself saying "I have that". I did miss the type of cams you have. I also have the 60# DeatschWerks injectors, aluminator shortblock,but pretty much everything else is similar. I do have to 5 speed, no auto for me. I have the Vortech V3 HO kit, stock pulley I think is putting out around 12psi. I got 741/663 out of it. I am running the 127650 cams, heavy springs, but keep dropping valves. First was #6, then #5 after rebuild and 800 miles. So, so far I have not had the luck you have had, it is currently broken down now, about to reassemble this month.
That's a badass build! You might need some new retainers or guides for the valves potentially, because the heavier springs can only do so much. Are you revving really high? Cause normally 3v's don't have any valve issues until they start floating past 6500
@@CamMarz cams are good to 7100-7200. The actual valve trumpet is what is breaking. Almost like piston to valve contact but the timing is spot on. Also, I am using Comp cam limiters, not the lockouts. I have spoken to Comp numerous times and no one can/will help. These cams require these springs.
@@michaelkennedy2528 that sounds beyond frustrating to deal with
@@CamMarz No doubt. The guides are super loose after I tore it down also, they were perfect when assembled. There is plenty of oil pressure, even have a gauge ON the heads to verify oil pressure at that point. ALL oil channels have/had been brushed and cleaned. Just don't know, I did a break down on my channels, check it out, maybe you will see something that I am missing that could be the problem. Thanks.
My car setup pretty much same thing. Except the 373 gears and hot rod cams.
What cam setup did you go with?
Very solid video, liked the honesty, well done!
Thanks for the input!
I’ve been looking for an S197 for a swap setup.
I have a 2005 Thunderbird I want to throw the engine/transmission in.
A mellow exhaust paired with the hot rod cams, a “cheaper” build-for the moment.
I got a 5.0 in it at the moment, but if I’m being honest the 5.0 sound just isn’t “me”.
Love the sound of these 4.6's that's for sure!
Sweet car man. I just picked up an 05 procharged mustang last week. .
Love it man! These cars really do sound incredible
@@CamMarz I'd love to get cams in mine, but I wouldn't know where to begin.
@@alfenner3309 the ford racing hot rods I have work great with boost!
Nice built I have 98 gt 5 speed needs paint job full tune up and after that is done I'm gonna put cams gears throttle body and change the cylinder heads if I make around 300whp I'll be happy
Very nice build and setup and thanks for the video.
Hey, man. Great video. I love how you kept the exterio simple and super chsrged it conservatively.
Why did you go with smaller wheels in the front and not the same size all away around?
They were actually 20's all around
I own one all stock getting ready to do some upgrades!, good video!.
So cam you don’t need boost gauges for the Procharger setup ? I just ordered one and plan on getting a Dyno tune for it .
In retrospect, no. But it's always a good idea to have as many gauges as possible to diagnose any potential issues. Plus a boost gauge is cool to look at😂
Love the car and the mods 👌🏾 agree the 5r55 is trash did a 6r80 swap to my car
BIG JEALOUS, how much did the swap run you?
It costed about 2800 but it all depends on how you do it I installed the trans and driveshaft myself and ran the wires but I sent it to the shop to get wired and programmed with addition to adding the 13-14 shifter as well you can notice the difference right away especially with the torque and throttle response
I'm jealous but at the same time I see that half the engine bay is zip tied together which sold me on the Paxton Novi 2200 setup instead, seems the ProCharger kits don't fit very well in these cars :/
My engine makes a clicking sound when I haul ass on the interstate eventually it goes away have you ever heard of this? It's done it since I bought it in November 04. Any help on what this is?
It could honestly be alot of things. More than likely its valve train related, such as the phasers, rocker arms, lifters etc... Could also be time for a timing job, like ur tensioners. An exhaust leak or maybe even a pulley too, but unlikely.
If you scrape that crap ass foam off and clean that panel the leather will adhere to the door like its suppose to. I had the same issue in my 3V when I had it. Would recommend Gorilla glue as well lol worked for me :)
Maybe you would be be better off with that extra gear in the trusty 6r80 transmission. I heard they were great transmissions.
REALLY wish the first time around I bit the bullet and did that!
Great build 👏
Thank you!
Man boy sounds good man !!
love the car bro. Color wheels and build.
Thanks man!
So inspirational
"Owl"
You should check out my turbo build of my 3V. Just a little street car. Nice build on your car as well. switch over to a Holley and wake that thing up for sure.
I'll check it out!
Love the vid and tire setup 🔥🔥🔥
Nothing wrong with the tires but I will need stickier next time around LOL, they spin for days especially when they are cold.
So many things wrong with this setup...oh my God. I can speak cause I'm a Ford mechanic of 22+ years and I'm SVT Certified. But, it's on CZcams so it must be accurate and right and I'm wrong 😂😂😂 As far as the 5R55S goes, those are good transmissions up to 100k without proper service, you service it, it can last forever. You have a supercharger and that's why it needed rebuilt twice.
22 year old throwing parts at a car, yeah I probably did make mistakes looking back at it. Won't ever get over the 5r tho, got a Vette with a tr-6060 and 0 issues ever
Howd you get your pro charger system so cheap? They were 8 grand on American Muscle.
Bought it used
@@CamMarz thanks man
Great looking Car bro.💯🔥
With the charge motion delete plates do you lose any power or torque
I've had them since I was NA, and I didn't really feel any difference power wise. However it feels alot better with the butterfly plates gone. It takes away that weird throttle you get sometimes.
Sounds great looks nice now drive it like a mofo donuts fish tails at every turn figure 8's etc etc
How's the noise on the highway with the 3.73s? I have an auto with a paxton and I want to swap out to 3.55s or 3.73s but I drive on the interstate a lot; so I don't want to be more deaf than I already am.
Around 80 u hear the gears just a tad bit
Hey man! I just picked up a boosted 3 valve from Vegas and live in Chandler would love to link up with you and talk about cars!
For sure man! I'm always at meets as long as the car is running!
@Michael Drake 13k
Dude do you still have this car? Carbon Fiber Door Panels can be found at Stang thang.. You can thank me later.
What do you think about 84K Miles 16k $$$ for 45 Anniversary 3V GT ?
Prices are definitely inflated right now for vehicles. If it's a private sale, that's too much. If you're buying from a dealer, that seems about what they would ask for it. The 09 iteration of these cars is arguably the best because they snuffed out most of the problems that these cars had in the earlier years of production.
No built bottom end ?
Stick bottom end, she's holding up really well too! Centrifugal superchargers aren't as hard on the rods, plus I drive like an old man 😂
Do you know if the bullit grille will fit that bumper
any grill that fits a v6 bumper will fit this bumper
Where did you get your procharger and all accessories for only 3500? I can find one for less than 5500.
I bought the kit used
Do you have a link to that front bumper?
I don't unfortunate
Ayyy I know where ur at... north valley parkway where it ends ... lol
Hey bro do you by any chance have a link to the bumper and is it fiberglass or is like like the material of the oem bumper
I think I just answered your question on IG, let me know if it wasn't you though!
I need the link bro
What's up Modular bros, with all the problems I hear y'all be having with the 3v n 4v, I rather mod my 2v Panther..lol Wish me luck..
🔥🔥🔥🔥🔥
What do you do when smog due?
How much hp your mustang have bro ?
It dyno's 457/400
The crazy thing you could have found a car with most this junk already done for not much more than what you paid for this car and saved $20,000. And it was nutty to spend all that money and not upgrade the brakes and stereo. At least paint the brake calipers. Seems like he left off the cost of the painting too, so add $1000 for that. And the labour for installation.. thats probably a few thousand more.
What’s the part number for the long tubes?
I believe the JBA long tubes I have were discontinued by the manufacturer
Also the side turn signals can you use the oem ones?
Sorry to hear your transmission has given you so much trouble. I have an 06 with an auto not any problems with the transmission. I am boosting soon I'm waiting on supercharger to be built and shipped.
There's some people that never have a single issue with their autos! Which always surprises me cause I've always had so many issues with mine. What supercharger are you picking up?
@@CamMarz edlebrock supercharger love the way it looks and gets me a new manifold.
Nice! I was considering that one as well for a while!
@@CamMarz oh ya I'm so excited but terrified because I know I'm going to burn rubber so easy. What's it like is it hard to drive does it burn rubber in all gears?
@@generolmatt4 anything under 50 and you'll spin em yeah😂
How does the automatic run with the cam is it jolty or anything
Mines pretty jolty because I have only an 1100 stall in it, you can see the car lurch a little at low speeds😂
There is a reason why people yank those out and slap in a 4r75 tranny in them lol. I also hate to say this. However tci isn't the best transmission brand either.
What kind of gas mileage do you get ?
A lot better than you might think! Average around 16-17 MPG
What's the color or paint code please?
Tungsten Gray, I believe it's T8
I'm going to get a 10 and build that.
MMD ducktail spoiler...I think you said duckbill ? LOL !
Lmao I always mess that up🤣
How much hp to the rear wheels does it put down?
Can't quite remember, but I have a dyno vid on the channel if you were curious!
Is that your day to day car?
It was yes
Nice ok good to know 🤙🏼
Check Nate Rider
Ha my door panels look the same lmao
Hey buddy look Breen speed up North Indiana
Camaros are actually better to build better transmission and egines that make more power. A cammed fbo camaro ss is pushing 500 hp vs 370 on the mustangs
Your trans rebuilder has no idea what he’s doing. My brother is on 15psi kenne bell and w a 3200 tci stall, and the hardened input shaft w boosted shift pressure in the tcm he beats it daily and it’s held for months. My dad sprays over 300 on his also he’s fbo and his holds
Nice 3v though.
😈❗️S197 + coyote 5.0 + GT500 transmission ❗️😈
Don’t miss this one!
czcams.com/video/CLGS6OJcCto/video.html
Definitely not the middle of no where lol
When can I be in a video 👉🏽👈🏽🥺
Let's feature your car bro👀
Coyote swap
I'd rather 3.7 swap it
@@CamMarz might as well LS swap it hahaa :D
@@CamMarz 3.7?
Its an auto :( that made me sad
Same lol
Should of just bought a 5.0
Why?
No one wants to go with that set up 💀