Balancing Act Static vs. Dynamic Tire Balancing Quinn Thomas from All J Products Explains

Sdílet
Vložit
  • čas přidán 8. 07. 2020
  • tire balancing is very important especially for big off road tires. good balancing improves ride, tire wear and reduces steering system issues. Quinn Thomas from All J Products in Big Bear Lake, CA explains the difference between static and dynamic tire balancing. Dynamic balancing is much better and that is why your Jeep came from the factory with dynamically balanced tires/
    #DynamicTireBalancing
    #TireBalancing
    #AllJProducts
    #ImprovedTireWear
    #BetterSteeringStability
  • Auta a dopravní prostředky

Komentáře • 26

  • @tyronnfields7945
    @tyronnfields7945 Před 3 lety +2

    Great video...I learned something new today. Static vs dynamic balance ...wow!

  • @LEXICOGRAFFER
    @LEXICOGRAFFER Před 2 lety +4

    Even "right out of the box" I'd always wipe down a surface with a solvent like lacquer thinner or even (safer) isopropyl alcohol to ensure the weights have the best stick possible.

  • @alecb8509
    @alecb8509 Před 3 lety +7

    Video starts at 0:53

  • @Prachka1
    @Prachka1 Před 3 lety +4

    You may not need to clean it with a brush. But, you do need to clean it with alcohol for adhesion to glue better ..

  • @seanwhiting1
    @seanwhiting1 Před 2 měsíci

    can you mount a 37x12.5x20 on a ranger DST 2420, or do need a special balancer for larger tires?

  • @Upracefan
    @Upracefan Před 3 lety +4

    Great video of how to balance tires improperly.

    • @nickkempel6540
      @nickkempel6540 Před 3 měsíci

      Why do you say this? Because he put the weights on in multiple different sets/additions or something else I'm missing?

  • @fredblase5608
    @fredblase5608 Před 3 měsíci

    50+ years ago I had a retread 14" tire on a bubble balance machine, it would have taken 2 pounds of weight on one side to get it into static balance! One could look at it and see it was way out of round. We turned the tire in for warranty.

  • @joelmendoza3428
    @joelmendoza3428 Před rokem

    Quick question, would a static balance work good as a dinámic balance?

    • @backcountrydriver
      @backcountrydriver  Před rokem +1

      No! Dynamic balancing improves lateral balance in addition to vertical (bouncing) balance. This reduces the chance of death wobble (but does not eliminate the chance of death wobble).

    • @ACommenterOnYouTube
      @ACommenterOnYouTube Před rokem +2

      i static balance all my tires and NONE give me any vibrations

    • @SKANK_HUNT49
      @SKANK_HUNT49 Před rokem

      Yes its fine

    • @ACommenterOnYouTube
      @ACommenterOnYouTube Před rokem

      @@SKANK_HUNT49 ok

  • @GusMahn
    @GusMahn Před 5 měsíci

    I just balanced a set of 15”x10” used Jeep wheels with 35’s for a friend. On Dynamic it was asking for 26oz on the outside and 10oz on the inside directly opposite from the outside weight. It repeated on a second balancer. Static was 6oz on the centerline. No way I’m putting 2lb+ of weight on a wheel.

  • @kcmitch77
    @kcmitch77 Před 2 lety

    What rims are those??

  • @ykdavid
    @ykdavid Před 4 měsíci

    If the numbers are too high you can dismount the tire and move it 180 degrees from where it was. BTW Static is fine but not having a cover thor that machine is kinda dangerous!

  • @gregmiller2494
    @gregmiller2494 Před 3 lety +7

    May be balanced, but looks a little out of round.

    • @curtshumaker5768
      @curtshumaker5768 Před 2 lety

      100%. You can balance an egg - think about it’s shape. But, it won’t roll down the road smoothly. You need to match mount the high/low spot of the tire and rim. That did not happen here. The “hop” is noticeable as he runs the machine. That assembly will not run smoothly down a smooth road…

    • @martymcfly660
      @martymcfly660 Před rokem

      just a little bit..hahaaa

    • @ACommenterOnYouTube
      @ACommenterOnYouTube Před rokem

      that tire IS out of round

  • @KINGRG1
    @KINGRG1 Před 11 měsíci +3

    In my experience anything 33” or larger should be balanced in static mode. I always hear people saying “you should really Road Force balance it” but the majority of those people are clueless on how tire balancing works. Road Force machines can’t properly match large (33”+) tires just because the machine doesn’t have that capability in that mode. It doesn’t matter if you have a 4th generation or even a newer 5th generation Road Force machine, either. The other thing people don’t realize when they complain about having a tire static balanced vs dynamically is that a large tire that has been static balanced will probably never go faster than 90 mph which most M/T’s are rated for 100mph. Drag racers and road racers alike use static balancing for high speed driving. IF you choose to balance your large tires dynamically then it would be best practice to balance your tires every 20,000 miles.

  • @curtshumaker5768
    @curtshumaker5768 Před 2 lety +1

    I think you need a roadforce balancer. You clearly have a low spot with that much weight needed. Either the rim or tire. Be that as it may, the RF machine would tell you where and u can spin the rim/tire to match those spots and reduce all that weight you put on the outside plane. Even with the size of that tire/wheel assembly, that’s a lot of weight….

  • @SKANK_HUNT49
    @SKANK_HUNT49 Před rokem

    😂 this guy is clueless 😂 omg

  • @ACommenterOnYouTube
    @ACommenterOnYouTube Před rokem

    That tire is BAD ... I can see its lumpy as it spins.