Dodge Nitro - CLIMATE CONTROLS REMOVAL / REPLACEMENT (2007-2012)

Step-by-step guide on how to remove / replace / change front heater climate controls assembly on Dodge Nitro SUV. All you will need is a phillips screwdriver and plastic trim removal tool. (2007 | 2008 | 2009 | 2010 | 2011 | 2012 | SLT | R/T | LIMITED | SXT ).
Often one of the front climate controls knobs will stop working which can cause lots of problems with heat, air conditioner or air flow. Luckily it is quite easy to replace it and your best bet is to get used climate controls from a car wreckers or second hand online.
To remove the climate controls, first you will have to pop out plastic dashboard bezel that is surrounding the radio unit. Once that is done, climate controls will be held by four phillips screws.
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@MrHub929]

Thank you!! your video showed me every thing I need in perfect detail.... very very helpful!!

[@QuiteAlright]

I'm glad my video helped you out. Thanks for the comment and for watching

[@mistica996]

Where did you buy the replacement at? I've been having a hard time finding one

[@QuiteAlright]

Get a used one from car wreckers. There should be plenty available around

[@gabrielsantos4387]

Why are you changing yours? Mine will not change the heater flow from top to the floor.

[@QuiteAlright]

Two knobs didn't work anymore, got stuck. You might be dealing with a failed blend door actuator if you can't change hvac mode

[@donprice7302]

Should top out