Hopper cleaned by long volvo excavator ll hopper fast cleaning for uninterrupted iron ore production
Vložit
- čas přidán 3. 04. 2022
- Quick hopper cleaned by big volvo excavator ll hopper fast cleaning for uninterrupted production.
#conecrusher
#crushing
#boulder
#crushingplant
#ore
#technical_info_fe2o3
#volvo
#volvoexcavator
#volvoexcavators
#excavator
#excavators
#excavatorvideos
#excavator_vehicles
#excavatorloadingtrucks - Věda a technologie
Is this Video in slowmo?
Same dope that operates the hook by the looks of things. Must be the boss' son.
It's painful watching this machine operator !!!
Absolutly, it looks like this guy don't even know how the excavator even works! Sooooooo slowwwww!😴🙄
It's the same operator that drives the hook!
@@stujd1539 L0L
LetsDig 18 would have it done quick and look for more work in the time it took this guy to do it
I could have done it quicker by hand
Good operator: "Don't move dirt twice."
Bad operator: "I'm gonna lift all this dirt up then drop it down where I found it."
28 minutes of nothing
Just pain watching this operator🤦🏻♂️
I think they do this slowly to kill the day and go home withouth finish the job
I was the owner of that factory and I would have already fired that operator
Someone got disappointed huh
If hes gettin paid by the hour id be taking my time
bloody painful alright......if i was doing that, id be done and dusted in 30 mins for that whole side....good size digger like that can easily do it....
@@hardtop123 yeah right you probably never even operated one that big.
@@jebsvjxbdxb1128 yeah i have actually.....along with a few other sizes
Let’s dig 18 would have been the better operator
That is not what I would call "long reach."
he only cyn clean up the upper section..so the whole thing doesnt make sense :-)
And he isn't making a good job of that either. Waste of space. Where the hell do they find these idiots.
If the excavator tracks were 90 degrees ,so sideways he would be closer. He would be able to see better and have a bit more reach.
I had no idea there was so many expert excavator operators on CZcams.
cant be doing medicine, law and astrophysics all day. the experts need a hobby too.
then watch Mr. Works and Mr. Machine too, then you won't watch that shit anymore
just use common sense
that's about what he is doing!
Чувак просто страдает хернёй, типо время идёт и бабки капают.
Да, как будто от конкурентов чел. Прям хочется из кабины его вытащить и самому сесть! Смотреть невозможно на это дрочево!
Видос просто классика,как надо работать, чтобы показать как не надо работать! Супер!
I think " Hopper cleaned" is saying a bit much😅
I’ve seen glacier’s move faster than that!
Perfect you created a shelf for the new material to get stuck on !! You need a long reach machine and a better operator to remove all the material to the edge of the crusher !!
I have often wondered why they didn't clean the hopper when it gets built up. Just from my perspective it seems they get more boulders hanging up when the hopper is not "clean". But they could use a "true" long arm excavator. Just an opinion.
Ok I will try
All these comments from 'experts that don't realise the operator may not be able to see what he is doing. Look at the height of the hopper wall above the excavator tracks.
Exactly!
I'm a quarry excavator operator and I always read these comments on machinery operations and there are more experts then there are machines in the world lol and as the saying goes opinions are like arseholes everyone's got one
If you don't know how to operate heavy equipment you should leave it to the real operator's!!!!!!!!!!!!!!!!!!!!!!!!😎😎😎😎
I noticed how gleamingly clean the windows are on the Excavator. The operator did not appear particularly intuitive using the Machine, but he’ll improve. Everybody does. That Volvo is a lovely machine to be learning on, if he is?
Seems to me they go the hard way to do this job
worst case of milking a job I ever seen
Would be more efficient to use the bucket to just push the material into the shute....
Instead of bucket touching strait to the hopper wall, you should install a scrapper plate to the bucket with springs between bucket and the scapper plate.
This way the hopper wall will not be damaged because the springs will work as buffer .
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
That is good idea man
Its all hardfaced , it would wreck the bucket before it wrecks the chute.
We
You guys needs to maintenance than ignored it build up soils . Do once a monthly to cleaning . Oh come on Brandon !!!!
Would have likely been quicker to get a smooth bucket and mount it backwards so you can push and scoop downwards rather than pulling up and dropping
weld a strip onto teeth so he dont have to worry about snagging a plate would have gone much easier my opinion
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
If you ever see a video on CZcams with an excavator in it, you can be assured the comments will be filled with people calling the operator terrible at his job. Looks like he’s doing it just fine to me.
The alternative is that the guy who is just doing his job is so awesomely skilled they could crack an egg with a 100-tonne excavator!
Right?? IMO or priority on not to break anything. I think he did great considering a wall in front of him doing it half blind,, did a lot by touch
How well this high-performance excavator in action, produced by the famous Volvo company, is filmed!
very few Operators seems to know what they are doing
Обычно я хорошо засыпаю на этих видео. Всё так так медленно. И крюк медленный, и экскаватор медленный.
They’re gravity dropping 20 ton boulders out of huge dumpers and they’re “worried about damaging the hopper liner” 😂 This operator is just slow, whack or both!! ⏰ 😴
They are impact proof not ripping. If he catches a tile it will rip out like it's nothing.
I think the excavator operator is doing time pass....he don't want do the job... irritating 🤔🤔
Must be the operators first day
The company should invest in a camera, so the operator can see where his bucket is, to prevent going too deep. The operator was very smooth on the controls.
Don't bring it back up with an empty bucket! Make your moves count.
1 thatsnota long reach excavator ,...
2 turn up the bloody revs ,...
3 OMG how so bloody painful to watch this guy operate ,... it's like it's his first week on the machine or he's scared cause he's being watched by some big wiggs???I don't know !!!!!
Very competent operator but I can't understand why he didn't draw the bucket towards the machine after pushing from the top. Just a thought.
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
Not much of an operator, or much of an operation. Trucks are running 3/4 loaded, look around the pit. It's a mess, sloppy site, light loads, must be a shit site to work at, nobody gives a damn.
Slow is smooth, smooth is fast.
Everyone else enjoying coffee break while he cleaning the hopper.. lol
И за такую халтуру ему ещё и платят?! Позор!🙄
That's not a long stick trackhoe I doubt that operator could operate a long stick Regular stick is more than he can handle. Probably the best operator in the pit
The most incompetent excavator operator I have ever seen
если экскаватор поставить бортом к завальной яме, он сможет дальше достать ковшом
По моему, этому эксковаторщику, как не ставь, толку не будет. Впечатление такое, что он эксковатор вчера первый раз в жизни увидел.
Would some sort of vibrating wall be better solution turn it on once a day to vibrate all that clean?
You need long arm to reach down to clear it. You guys need to keep. Clean up instead on ignore to build up the dirty and difficulty to run down the dump to crunch hole
This is a stone crusher not a dirt crusher, the loads should be screened before it goes in the crusher, more than half of the load shouldn't be going in there just the stones, waste of time.
All that excess material, nice
Оператор не пойми какой работает как перый раз за пультом😂
at this rate it'll be out of production for an inordinate amount of time - 'dig-in Bro and get it moving - pronto!
I have an excavator. That took a lot of patience from the operator not to break the tiles.
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
@@TECHNICALINFOMINING especially considering the operator could not see where the bucket was. Have you thought of turning the excavator so the tracks are parallel to the hopper. It will give a little bit more reach. Counterbalance
That outfit looks like cowboys work there
Gosh that was PAINFUL to watch!!! Operator has no clue
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
Need a longer arm excavator with wide flat bucket so the teeth will not damage the wall tiles
i'm no machine operator, but wouldn't a flat blade work better? used to use a "rake" type tool, but with a solid blade, for moving grain around (by hand). was much easier and more efficient than a shovel or similar. worth a try maybe?
got to piss with tackle you got. they are in a mine so they use toothed buckets, not much need for a grading bucket there
A grading bucket on a long reach. Probably not practical.
You would think since they have to do this all the time they would have an excavator with a taller cab and a true long reach arm with a rubbery blade to push that packed dust down the hopper.
There should be large chains hanging down the hopper sides that can be moved side to side once a day to keep that hopper clean.
That crane can be used to lift them up no more than 3 links to break the hard pan loose.
Also either leave the water on continually to wash the hopper clean or leave it off so as not to make mud.
To many people standing around doing nothing, Start getting that machinery cleaned up, or get fired.
That's not fast. Scrapping inches when he has feet to go.
Wow long over due...id say...lotta durt to shift...Great video..
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
There may be another reason for allowing the buildup - it stops the boulders and rocks from directly hitting and causing wear on the lining of the actual hopper. So a certain amount of buildup may be tolerable but not to the extent here
Relax man he's just giving his thoughts on the matter
@@YourName-jm7lz lmao you got some problems at home? people are allowed to state their thoughts and ideas.
Your girlfriend look like my mom
It would be a lot easier if they didn’t have the claws on the end of the bucket.
The title says fast cleaning, there is nothing fast about what this operator is doing. must be first time sat in the seat.
того оператора,который включает воду при разгрузке машин - с лопатой туда загнать! потом пусть подумает,стоит ли оно того!
Pretty confident I could fly to where this site is (Pakistan?) drive from the airport to a hotel, find and rent an excavator, have it delivered on site, teach myself how to use it and proceed to clean out the hopper before this guy would finish.
I think that if they put a steel plant across the bottom of the shovel weld it to the teeths
if this is fast cleaning, i wonder how slow cleaning looks like
Should have moved the bucket side to side
Not sure what you class as fast cleaning, I nearly died of old age watching the “not so long “ excavator drag that job out! 😬
Surely this was a job for Captain Hook?
That excavator doesn’t need a bucket, it needs a huge spatula
a big job!
This is not a long excavator
I have to say, I am impressed by how quiet this machine is. Usually all the equipment in this part of the world is clapped out to shit. This one is actually tight. The operator is slow as shit, but the machine is nice.
Kinda pointless unless they need to work on the sheeting.......otherwise it is just going to build up again
Having the dirt there acts as a cushion so the big boulders don't bash against the metal......i would leave the dirt there if it doesn't need to be cleaned
Three days later and he still is not finished with the first side.
Вот нет бы экскаватору боком встать и стрела длинше и есди туда сюда чуть чуть
These guys would dig over their drives..
何故？
オペレーターは、仕事の場所を見なぃのですか??
素晴らしい工場なのに!
責任者が、😅指導し無いの😂
Wrong machine for the job they should invest in a longreach whit a tiltrotator and a bucket whitout teeths on it then they could remove that dumb hook thingy for clearing rock jams and just get s hammer for the long reach
All I can think of watching this is the guy from will it blend going Dont Breathe this.
how about lining the chute with a thick metal plate mounted on springs with vibrators attached
to avoid all this careful slow maneuvering you praise this operator for
silk touching tiles that gets huge boulders dropped on them every day
all time spent not processing ore is profit-consuming
This guy, is never an excavator driver !!
That bucket is not a good tool for that. A large flat plate secured to the arm would do a much better job.
What about the lego hook 😎
You need a grade all machine with a 6 foot wide 2 for high blade that you can rotate 360 degrees to efficiently clean the hopper sides. Would be a lot quicker and a direct reach instead of articulated.
Pity someone doesn't make a steel/copper spinning brush attachment.
what the hell is he dooing ? ? ?
I’m wondering that myself!!😂
Welcome to all you for yours opinion.
But slow operation of excavator is used to resist or decrease from damaging of hopper liner plate.
😬אתה עובד לאט🐢🐢🐢
They should get the longer one, so thats it can reached to the bottom.
I feel like he is milking it, or is the new guy. lol
Ok start at the bottom and the top ore will fall by its self simple
Just wondering instead of using the excavator if you just take the boom and mount it on a track above the hopper with not sure if correct term. But the claw the use to pick up trees. It's flat so you won't damage the plates as you slide the paydirt off the sides. Pluss added effect if you get a bolder jam you can just grab it with the claw and slide it in to the crusher
there is a crane track or something above this that holds the big question mark looking thing for moving stuck boulders, some sort of flat attachment for that would work better than this
@@superdonster77 yeah that's why i was thinking something that could also grab if by chance the boulder was to big then up out broke then back in
That is not excavator, it is a turtels
Maybe easier with a rotator? :)
Never understood why the hopper didn't have vibrators fitted on the underside.. running them whilst unloading would have virtually eliminated this sort of fines build up. And its' a standard excavator - certainly not a long reach one..
Ok
if thats what you call fast you dont want to see someone thats not riding out the clock
He must get paid by the hour 😂😂, he would see better if he had his tracks parallel with the edge of the hopper, it's relatively loose dirt so he won't topple in
Looks like a standard excavator not an extended stick out anything
This build up would be prevented if they didn't use the misting spray. Job security i guess
either that or use heaps more water. Wash the hopper down when build up starts.
Seems like he’s using the wrong bucket.
or have a long-handled shovel as used on ore barges
now that is how you do it right
This guy is green. Pick up the pace turtle...