NEEWER CM28 Wireless Microphone System - Unboxing & Testing

Sdílet
Vložit
  • čas přidán 25. 07. 2024
  • I recently purchased the NEWEER CM28 wireless microphone system and I wanted to share my unboxing experience. Come learn with me as I test the features out and see how it compares to my existing microphone.
    Please note that the audio in this video does not have any post processing applied (review experience) so the audio levels will vary.
    I also mentioned a video from MarkusPix that shows where his microphone is located, so here's a link to it: • Where do I hide my mic ? . I recommend checking out his videos as he provides genuine advice and reviews.
  • Jak na to + styl

Komentáře • 21

  • @FF-xl7yw
    @FF-xl7yw Před 3 měsíci +1

    love the cap idea!!!!!

  • @theeightbitdad
    @theeightbitdad Před 2 měsíci +3

    how do you change the brightness of the screen?

    • @smerkin5000
      @smerkin5000  Před 2 měsíci

      I don’t think it’s possible, the manual doesn’t say anything about it.

  • @Jetsudo
    @Jetsudo Před 11 dny +1

    Hey dude, a long shot. My cm28 when I use the usb cable to the pc wont pick up as an external drive. I did record things using the internal memory but cannot access it. Was there anything specific you did? the manual isn't really helping -_-*
    Cheers!

    • @smerkin5000
      @smerkin5000  Před 11 dny

      It was plug and play. To make it clear, the recordings are stored on the microphone devices themselves, not on the transmitter device.

    • @Jetsudo
      @Jetsudo Před 11 dny +1

      Haha, cheers, just randomly found another video where the guy shows exactly what I needed to see. I didnt know you could also just use the mic on its own to record, without needing the reciever to record (albeit, there's no monitoring, but still! ^_^).
      Cheers for the reply!

  • @RaylayRTS
    @RaylayRTS Před 3 měsíci +1

    Once i connect it to my camera via the 3.5 jack, can i press record from my camera and it automatically starts taking audio from the new mic ?

  • @rexhoss
    @rexhoss Před 3 měsíci +1

    Seems like there is a lot of static or wind noise in the background of much of your recording. Is that something in your room or just that that mics have a noisy sound floor?

    • @smerkin5000
      @smerkin5000  Před 3 měsíci

      I had a 8xHDD NAS behind me and also the mic at the beginning was the modmic while I was doing the unboxing. Pay attention to the top left where I indicate which mic you are listening to throughout the video. I also applied no post processing to any of the audio for this video.

  • @DavidGarciaSMD
    @DavidGarciaSMD Před měsícem +1

    Can you connect more than 2 mics to one receiver?

    • @smerkin5000
      @smerkin5000  Před měsícem

      Not that I’m aware of as when the mics connect to the receiver one is the left channel and the other is the right channel, or they can also be mixed together as mono.

  • @HushR6
    @HushR6 Před 4 měsíci +1

    My one question, is it possible to upgrade the 4gb of storage or is it the only way for your standalone recording

    • @smerkin5000
      @smerkin5000  Před 4 měsíci

      There’s no upgrade option unfortunately

    • @HushR6
      @HushR6 Před 4 měsíci +1

      @@smerkin5000 cool just recieved mine in mail today but was at work, I think I can still manage with the 4gb since it should be around 9 hours of capture time or so if I'm not mistaken

    • @smerkin5000
      @smerkin5000  Před 4 měsíci +1

      @@HushR6 awesome, I’m sure you’ll love it and the storage should be more than ample

    • @HushR6
      @HushR6 Před 3 měsíci

      @@smerkin5000 I have been experimenting w/ it.
      The storage has been wayy more than enough so far, But been having an issue w/ recording I have been trying Mono and only one of the transmitters is recording internally, but I have both recording or at least indicating that they are recording. So, unfortunately I have had 0 luck on Mono mode.
      I did do Stereo once with good audio, but it was muffled from the noise cancellation on top of my sound proofing of my helmet. So tomorrow I will be trying Stereo again to see if maybe when on mono it only decides to record 1 transmitter even though both are recording on separate locations,
      (Setup Explained) so I have my helmet mic a Purple Panda lav w/ a dead cat connected to Transmitter 1, and my bag mic Solo Transmitter 2 w/ Dead cat capturing exhaust,
      So far the exhaust has always come through, But my helmet mic has been hit or miss. No sound just static but not in response to my voice or exhaust. I am also ensuring my lav mic is securely in and not loose or able to be pulled easily either via the wind or me turning a certain way. Was wondering if during your testing Mono ever gave you any issues when using both transmitters at the same time.
      From my understanding Mono should be single track use from one or both transmitters if using both while stereo would be dual track use via one or both transmitters if using both or is that just me having a lack of knowledge moment?

  • @JeanDearCanada
    @JeanDearCanada Před 4 měsíci +1

    Oh shit, you don't own a synthesizer. My videos have never been served outside synthesizer land...

    • @smerkin5000
      @smerkin5000  Před 4 měsíci

      Yeah I was watching another video on synths and I think because of that your video was recommended

    • @JeanDearCanada
      @JeanDearCanada Před 4 měsíci +1

      @@smerkin5000 It's a pretty big deal for me! Virtually all of my audience, also has a CZcams about a room full of badly played synthesizers. Being served outside of that silo is an important milestone, because I need to change the voice of my writing!