We've seen some misinformation floating around about our WT-1242 and Dan shows the difference between it and a WT-990. We also give you a closer look at our new Power Stack.
Great video Dan! Very informative and you answered all of my questions without me having to take apart my 1242 to see the differences! That is bad ass.! I had no idea about the spiral cut diaphragm and the collaboration with Walboro! I can’t wait to break in my OBR beast! I’ll be running on 100 octane CAM2! On top of that the new stack looks killer! Definitely have to pick one up! Keep up the great work! Have an awesome day! 😊✌️
On point bro thanks! Cant wait to unbox the beast you guys built for me no prisoners! On my new 34 reed signiture series! Full punched out great info and ill be enforcing it on my unboxing! Talk soon!💪💪
Hey man I don't have one of your engines but I just got a redcat rampage and I've gotten about 3/4 of a gallon run through it at 25:1 amsoil dominator ethonal free premium. But now I am bogginh horribly and it won't go faster than a walking speed and has a sporadic idle up and down and than dies. Do they have a fuel filter or if so maybe it's clogged?
Hello there Mr, Dan ....Awesome videos . I am Javier from NYC and just want you recommendations before buying a signature 34 cc engine , would like to be able to run it in the street as well as on the track and be able to compete with the great build Drag Bajas and possibly Win some race at some point ? So what's the best recomendatios or guidance on the type of engine and mods ?? I have a king Motor Baja buggy wiht many upgrades to be light but strong where it needs to be and running 2 speed system. Just need a next level powerful heart and I have be honest with Mr. Dan , it woukd be my first time buying a RC engine, therefore I just want to be sure that I made a really good and the wrigh choice on buying your signature OBR engine, thanks for amazing educational videos , blessing to you and your family Mr. Dan.
I have one issue my carburetor wt668 is not getting fuel. I pump the bulb and air bubbles go into the fuel tank. I recently changed the tank n carburetor so what did I get wrong bruh?
@@JOEMAMMADRINK40Z brother it will not run no fuel goes to the wt668 carb at all. The tank and lines are new. I'm hearing the wt668 carb is something I should change out and replace with a 990 or better.
Would you say the wt990 or the wt1107 carb is better? Also I’m planning to get an engine from you guys, would you say the 34 reed is a good choice for off-road? I’m looking for top end rpms
Best guy to explain the small details former pal Hurricane Art Rc
Great info…why aren’t you guys making any more videos 😢 looking forward to seeing more videos from you guys
Great video Dan! Very informative and you answered all of my questions without me having to take apart my 1242 to see the differences! That is bad ass.!
I had no idea about the spiral cut diaphragm and the collaboration with Walboro! I can’t wait to break in my OBR beast! I’ll be running on 100 octane CAM2! On top of that the new stack looks killer! Definitely have to pick one up! Keep up the great work! Have an awesome day! 😊✌️
On point bro thanks! Cant wait to unbox the beast you guys built for me no prisoners! On my new 34 reed signiture series! Full punched out great info and ill be enforcing it on my unboxing! Talk soon!💪💪
Thanks Dan sounds good
Thanks Dan great info.
what about the 813 that squirts fuel when you punch it? any difference, can it be modded to have lower psi openin?
Hey man I don't have one of your engines but I just got a redcat rampage and I've gotten about 3/4 of a gallon run through it at 25:1 amsoil dominator ethonal free premium. But now I am bogginh horribly and it won't go faster than a walking speed and has a sporadic idle up and down and than dies. Do they have a fuel filter or if so maybe it's clogged?
Ya gotta tune them and change up how much fuel they are getting, there is a high and low fuel needle on the side of the carb
Love the carb
Would this fit on a standard losi 5 engine
My engine cuts off when I squeeze the throttle?
Stupid question? Which is the inlet and outlet side of the carb?
What carb is the best for 32cc engines in your opinion? Is there any downside to running wt990 on zenoah g320 or should i stick to 1107?
How do you think your stack would do on an walbro 1157 extreme carb on a 35cc?
So what would be a good tuning point on this carb for engine break in?
works like the Rooster Tail 990, except for the spiral membrane,how can I best buy this 1242 from Austria?, schöne Grüße aus Österreich !
from what cc should u use a 1242?
Does this include the mounting bolts as well?
Hey do I just purchased two are the settings the same as the 990
So on these carbs what’s the factor setting for tuning
Hello there Mr, Dan ....Awesome videos . I am Javier from NYC and just want you recommendations before buying a signature 34 cc engine , would like to be able to run it in the street as well as on the track and be able to compete with the great build Drag Bajas and possibly Win some race at some point ? So what's the best recomendatios or guidance on the type of engine and mods ?? I have a king Motor Baja buggy wiht many upgrades to be light but strong where it needs to be and running 2 speed system. Just need a next level powerful heart and I have be honest with Mr. Dan , it woukd be my first time buying a RC engine, therefore I just want to be sure that I made a really good and the wrigh choice on buying your signature OBR engine, thanks for amazing educational videos , blessing to you and your family Mr. Dan.
Wt1242 is mean for what size engines? Good explaination.
I have one issue my carburetor wt668 is not getting fuel.
I pump the bulb and air bubbles go into the fuel tank.
I recently changed the tank n carburetor so what did I get wrong bruh?
loose/cracked SENDING fuel line will do this, a cracked p bulb, or carb gasket,
Does it stop this after it's running????
@@JOEMAMMADRINK40Z brother it will not run no fuel goes to the wt668 carb at all.
The tank and lines are new. I'm hearing the wt668 carb is something I should change out and replace with a 990 or better.
I got a new carb 990 and now the fuel is going into the carb so now I am not getting spark what's a good plug for these 5th scales?
Would you say the wt990 or the wt1107 carb is better? Also I’m planning to get an engine from you guys, would you say the 34 reed is a good choice for off-road? I’m looking for top end rpms
990 up to 29cc
1107 for 30cc and over
@@tontobb8956 thank you for the help!
Hi dan. How much is it dan. Thanks need one quick. Race comin up. Thanks again
Dan what size carb on a g290. Thanks man been watchin u 8 yrs. brother. You and all the guys frm obr know your shit. John frm JT racing.
Has been a while , still running Badass engine I got from you all in my 5ive! Still rippin and shittin! You guys still making engines?
They are still making killer motors
Need to update phone number called it then it said disconnected phone number
My mtxl has big balls because of the brothers dans the man........
Obr strong 💪
Dan's been bodybuilding?