Took my chevy tahoe 2007 to chevy dealer the next day they called me back amd said due to my wire harness they cannot diagnose check engine light .I'm running out of options what do I need to do?
My 13 yr old just bought him a 96 s10. I have a donor truck that I drove for years…. Has full drivetrain/harness. The 96 s10 is 2.2/5spd, the full size is 5.7/4l60e. What are our options?
@@p.b.sHUNTING where you able to use alot of oem parts or dis it require swap parts. i was under the impression v8 swapping the s10 where a little harder. didn't mean to offend you
If you want to retain ABS you must retain your factory ECU and ABS wiring. The factory ABS is a joke and this is why I delete it. The rear axle does not contain any speed sensors for ABS. The ABS only controls the front brakes and does a poor job in my experience
Thank you. I just got the engine back and am looking to start the swap.
I saw you hacked off the Ac wiring for the OBS, I’m guessing you won’t have ac? Or will the other engine harness control the ac? Thanks
easy to trigger the ac clutch. its power and ground. wire in the high/low sensors in line the 12v signal to the ac clutch.
Do you make new engine bay wiring harness for obs 1997 k1500 5.7 sle? If so how much ?
@swaptimeusa how do I send you my harness to rework?
Took my chevy tahoe 2007 to chevy dealer the next day they called me back amd said due to my wire harness they cannot diagnose check engine light .I'm running out of options what do I need to do?
How did you add the ground ? Or what did you connect it to on the harness
Do you guys sell these harnesses?
If you don’t mind me asking, what exhaust system did you run on your Lt1 setup. I’m wrapping mine up now but it just not sound like I want it to.
Mitch do you have your OBS wiring service listed on your website for pricing?
Not yet. I do it for 300$. Email me at swaptimeusa@gmail.com
My 13 yr old just bought him a 96 s10. I have a donor truck that I drove for years…. Has full drivetrain/harness. The 96 s10 is 2.2/5spd, the full size is 5.7/4l60e. What are our options?
prob not worth it imo.
@@zakiramjan9822 probably a good thing I didn’t ask you
@@p.b.sHUNTING where you able to use alot of oem parts or dis it require swap parts. i was under the impression v8 swapping the s10 where a little harder. didn't mean to offend you
What's the price for one ?
What about 94 obs
It looks like pruning a grapevine😅
If you want to retain ABS you must retain your factory ECU and ABS wiring. The factory ABS is a joke and this is why I delete it. The rear axle does not contain any speed sensors for ABS. The ABS only controls the front brakes and does a poor job in my experience
How do I send my harness to you to rework. Really need the help.
@@jermainemcgee5092 please email me at swaptimeusa@gmail.com