How to Replace a Clutch in a Big Twin Harley Davidson
Vložit
- čas přidán 26. 08. 2024
- Shop Now
www.jpcycles.c...
Watch as Pauly shows you how easy it is to do a clutch installation on his Dyna. The procedure is pretty much the same on all of your late model Big Twins with mechanical clutch.
See more at Countersteer
www.jpcycles.com/countersteer?How_to_Replace_a_Clutch_in_a_Big_Twin_Harley_Davidson&Qwn1yaZ29ak
Videos like this are a lot better with no background music. I'm not trying to rage mosh while putting my clutch in. Aside from that, I appreciate the information within. Cheers!
I'd rather the music than hear his life's story and a bunch of extra talking.. this is a good video...
What i like most about J & P Cycles videos....They encourage you to do the more simpler repairs and maintenance on your bike yourself!! And they instruct you how to do it step for step. Because of that i will always make sure anything i buy i get from J&P Cycles if they have it. My favorite quote of 2020...."NOW GO WORK ON THOSE BIKES!" that's priceless in my opinion. J&P Cycles ROCKS!!!!!!
Thanks man!
@@jpcycles I mean what i say too!! Yall hooked me up on some Deuce Neck Covers when i almost paid 7 times the price you had on clearance. And also a sweet Highway Bar. If y'all had some of those Bad Ass pin striped J & P Cycles shirts i'd be getting a couple of those too!! You should sell them!!
Beg to Differ..They didn't show removal..no mention of the slip plates wtf
Just did my clutch and all 3 oil changes today with the help of this video. Thanks a ton, clutch is feeling way stronger now 💪🏽💪🏽
Why did you change all 3 fluids? Is that standard protocol?
@@KFLY67 no, probably he just do it at regular service
So I just replaced my clutch plates out and it was so super easy. This is my update as of 3/22/2019. Thankyou for this video you just helped me save alot of money. Plus it feels badass doing your own work. Thankyou brother keep up the great videos. I went with bandit clutch plates/friction. 2014 streetglide special. Since my bike has hydraulic clutch it was super quick to do.
This is a great video for my older FHLTCUI. My wife wanted the dealer to do it because she doesn't believe me how easy it is. You know how they say more people die in hospitals than anywhere else? Well, it's the same with dealers. If I can do it myself, then it's better that I do.
Great tutorial! I met Pauly years back and can tell you he is a gentleman and a scholar.
Now on to the next video to see if the primary drive is also reversed threaded before I beat the crap out of it a metric socket hehehe
Excellent video you just saved us HD, Hundreds Dollars! Thanks
Never knew how easy it would be to change a clutch. Fantastic video.
Great video! I am but a weekend mechanic, didn’t know that this would be so straight forward and easy 👍
Damn! That clutch installation video was awesome. Did not know it was so easy!
Compared to doing this on a car it is very diy friendly.
Hey yo Paulie, I'm a hd mechanic / fabricator...gotta say man.very thorough and simple instructions bud. Keep them knuckles busted!
Awesome! Thanks man your explanation are simple and the pictures from the manual are on point 👍
Badass video brother. Appreciate it now I feel a little more confident in changing out my clutch.
What goes in the basket first? The metal plate or.the clutch disc? What were the other parts you spoke of after you got the clutches out?
You start with a fiber end with a fiber
Thank you sir for a great video ! Oh how I'd love a lift table like that : )
Sean L me too 👍 damn that would make things easier
I noticed in another video that they removed the damper spring and seat because of an extra clutch disc, what is the purpose of the damper and seat?
Bloody yippa jack, Eazy Peazy, I do most work in my 05 Dyna TwinCam 88 Carby. Will be doing a clutch pack soon, as it's just slipping now, and I'll be hooking up a camper trailer, plus Cam Case upgrade with Feuling Cams, plate, hydrolic, pump, bearings, so this setup will be great for towing camper. Only want 515 cams, as I need the torque down low and NOT up top end flogging it on the streets, but sitting back and just seeing the country side around oz and tasmania. Cheers and thanks for the Video upload, Cheers, Teddy. Keep the wind in ya face, and not up ya ass.
I like your saying, Ride it like you can fix it. Thanks for the Video, i use to have such a Bad Habit of not following directions, i do know one thing, my next Bike, i will appreciate everything that has to do with my Bike, to bad i was so careless and gave a Thief an opportunity, that hurt!!!
Again, thanks!!!
I like this guy and his thinking really a good video and well done will watch again and his others to fix my bike chuck n tn
Thanks bro u a life saver I wanna work on my own got it done
Badass. Thanks, y’all. I appreciate it. I was gonna pay someone.. nah. I’ll do it, now. I appreciate the vid.
So far I'm liking what I see I adjusted my clutch first by the cable just to make sure it wasn't out of adjustment but I now know it's not hanks for the on point demonstration looks farely easy appreciate it there Pauly
you wont have to worry bean eater time to go back to Mexico!
When putting in new drag speacialties friction discs and plates do I need to put the dqmper spring and seat back in it that I removed taking out the old clutch?
Thanks , that was a great video , just saved me some money Thanks again
Thanks man for the tips, plan on doing all the work on my baby, your videos help
Awesome video on how to. Couldn't help but notice you had a book while working on the clutch, just wanted to know which book this is exactly. If I'm correct it looks like those Haines repair manuals. If you could provide any clues, it would help out a lot and I'd be very appreciated about it.
I usually use Harley service manuals, but the Haines do work fine.
I'm guessing this instruction will work on a 2012 dyna wide glide too??
Should my clutch basket have any play/wobble to it? I dont thin k it should but it does...a tiny bit when i move it from side to side. Should i try to torque it again? I did it a few months ago and back in there today for other reasons,but i checked everything while it was opened up
When putting the plates in do they go in a particular order or are they all the same? I know some clutches go in a certain way
Thanks for the video.....you guys make it look easy!!!!
Great video and very detailed. Thanks for posting!
Great video
Great Video Thanks 😊
Hey I have a sportster 48 2016, with 2000ks on clock, and the clutch doesn’t work, the cable still feels okay, but in 1st gear with the clutch on the motorbike doesn’t move like on Neutral. Last 2 times when I started with the clutch on it moved a little bit but then all good, now it doesn’t work
When the primary cover was removed the derby cover was still on it but when the primary cover was put back the derby cover had been removed requiring a new gasket & install of that derby cover - What is the reason for this?
Excellent video guys. Super helpful.
Awesome thanks. It is easy! I've done it in the (many years ago) past. Just nice to refresh myself. You've done a great job!
Thank you.
WOW! Super easy thanks for putting this video out.
Thanks for the video I’m gonna do mine this week I’ll let u know how I come out wit ur guidance I should b good
Great video.
Informative video thanks, two questions. Where do you recommend getting a torque wrench that won't break the bank. And soak friction plates a couple hours over night how long? Thanks!
Thanks for the video. Now ill order the clutch from your website!
You discard the damper spring and seat?
Hey J&P! When should I look into doing anything to my clutch and if so, what should I do? I´m about to surpass 23000 miles on my 2014 FXSB. This season I´ve installed some S&S 570 cams, 2-1 performance exhaust together with an FP3. I figure that it might be time... Would a diaphragm spring be enough for me? Riding quite ´lively´ from time to time! Really appreciate it
Nice vídeo
my clutch cable when i ride my bike my cable gets all loose handle wobbles then I readjust cable works fine than it gets all loose again after riding what can it be my clutch or something else? please can you help
do i have to reuse my stock double riveted drive plate.
Thanks for the video, it will be useful, we got to change the clutch on Lee's Harley soon, can't launch atm :D
Where can I find a manual to do maintenance on my bike ? 1990 HD softail
what about the springs that go in first 2 springs?
Really nice job you make it look easy
Is the 1996 electra glide clutch the same as that ¿
what type of cleaner do you recommend for inside cases after having them powder coated ?
Does it make a difference if you put the two inspection cover washer gaskets in with the Primary Gasket? Or does it not make a difference?
Excellent video
Thanks now I can do clutch pak,and adjustments wow!!
I have 1997 EVO with a Bandit clutch. When I put it into 1st gear the bike lunges forward and stalls. I've backed the clutch off and was going to see if the clutch plates release. Do I have to take the clutch apart and soak the clutch in primary oil? And re adjust. Or do you have another solution?
What shop manual do you use in this video?
Ja really goooood ! Thanks
What does the damper spring and seat look like .How will I know if mines got one or not ? So if so do you remove it completely and leave it out . What clutch would be good for my 2010 Tri Glide 103 I do want to save money but I want something good also .
Great clutch replacement explanation, just ditch the background racket.
I have a 2010 street glide. Slipping in 5th and 6th at speed. Twist the throttle and and rpm's go up but thats it until it re-engages. Adjusted clutch and changed primary fluid with no significant change. Is it time for a new clutch?
i love simple.in a way everybody can understand a person showing you how simple it really is to do this yourself great video
Hi one question for a 2010 harley trike I have installed new ramp and set the clutch as procedure but however cannot get the adequate play and the clutch handle become hard the half way. And if I pull hard on the clutch handle suddenly can feel the handle goes to the the bar and it gets kind of loose. immediately I have opened the transmission cover and found that the ramp has overranged and one of the balls has felt out the ramp. Actually plan to replace the cable and inspect the clutch basket for any abnormality with the disks and pressure plate mechanism. Any suggestion is always welcome! Thanks
Men, you make it seem easy! Congratulations!
How to replace the drive belt and New shocks
just curious how much clearance is there between pressure plate and friction plate
Very clear video, thx
Question: that manual your reading can i purchase one from?
So you don't need a spring compressor or anything like that for the clutch?
SO, DON'T FORGET TO REMOVE DAMPER SPRING, OK, DOES IT GO BACK IT, OR DO I JUST THROW MY NEW DISCS IN WITHOUT IT AS IT SEEMS TO BE SHOWN IN THE VIDEO, AND THE ONE ODD BALL DISC IN THE SET, WHATS THE DEAL WITH THAT, AND THAT SPRING, IT'S MY UNDERSTANDING THAT YOU DON'T WANT TO GET THAT IN BACKWARDS, I WISH I COULD FIND A VIDEO FOR THE STEP ABOVE FOR DUMMIES
Do you have any recommendations for the owners manual do you suggest Harley Davidson owners manual or an off brand which one is good
Good video.I need to do same on my sportster 48 is it a similar project to this being a sportster?
Thanks Pauly
Is there any difficulty in the order that the plates are installed? And yes, looks very easy, I have a 2013 RK with pretty low miles but its already slipping. Also, could you recommed a basic clutch, bike is all stock, I am moderately aggressive rider but I have never had a failure before, this issue arose from the original owner, or I could just blame Trump if that is easier.
I like your web page I'm glad your here so we can save
June Wade frizione
Can someone help me with two OEM disc installation question? My 08 FLHX has two "damper rings" that go on the clutch hub before installing the friction & spacer discs. One damper ring is flat and the other is slightly bowed like this ")". Question: Which ring is installed first? Question: what is installation direction of that bowed ring? I think the flat ring is installed first but that bowed ring is my big concern!
Bow ring outward toward the friction plates "(" ......... OR bow inward towards the trany ")"
Thanks you.be Bless too.
Great video thanks
Hey maybe you can help me. I have a 2016 Vrod and after replacing the clutch pack and reassembling the clutch will not press in. Any thoughts
Well done video, thanks!
Unless I missed it it did not show the removal or replacement of the adjuster screw
I have a 2002 Roadking years ago i had a hydraulic clutch installed on the bike, aside from the internal clutch adjutment inside the primary cover are there any other clutch adjustments to be made other than bleeding the hydraulic clutch.
That should be it. You eliminate the cable adjustment with the Hydraulic setup.
Do you need use a new damper seat and spring?
Very , very good video ! Thank You sir 😎
Ride it like you can fix it, 👍🏻
Shovelhead 1983, clutch assembly nothing like that. Easy to do.
What manual would you recommend
Sir , u not insert oil in clutch ??
or did it slide out with the pressure plate ??
Great video. Thanks loco
GREAT VIDEO!!! I have an 84 (titled as an 85) Fat Bob with the crappy 4 speed (rebuilt by M & M Cycle in Tinley Park Il. about 6 months ago) with the ratchet shift (garbage in my opinion). I have a situation where when I engage first gear at a dead stop the bike died, like there was no clutch. I looked at the adjuster on the clutch, it needed to be tightened. Now, when properly adjusted, the screw is almost all the way through the jamb nut, like 3 threads securing it. All the videos I watch show this screw through the jamb nut, not buried inside of it. Why is mine so far in the nut? Also, before and after the rebuild, the bike doesn't want to engage second all the time. It's like it shifts into neutral (without the neutral light coming on) and I have to double shift. Any ideas?, this guy has had my bike more than I have since Sept. 2015, it's getting old!!!! Thanks in advance!!!! Rob
hello i have adjust the clutch like you show on your video and i can not remove all the loose on the handle .. the cable it not broke.. thank you
Then you need to make the adjustment on the adjuster in the clutch like the video shows.
You guys make great tutorials, but those ain't no Hank Williams' songs. By the way, when will a Milwaukee Eight cam change video be coming out? Loved the twin cam one. Sans music is best.
Another awesome video!
Hello Their J&P Cycle. Smile. Thank You. Very Informative. I Am Slow, But Once I Seen How It's Done. I Very Seldom Forget. Please Be Safe, And Stay Healthy.
Thank you. Very informative.
You people and the damn music if I like to listen to music I go to Pandora 🔊🔊🔊
Literally a 1 hope job.. ez peasy!