Mercedes Benz Replace Combination Turn Signal Switch / Toggle / Stalk - C-Class - W203 C320

I'll show you how I replaced a turn signal switch AKA stalk AKA combination switch AKA toggle. This is the entire signal stalk that is used for turn signal and is also a combination switch for other functions. I replaced the switch because it was broken and would not stay clicked on when trying to turn left. It would turn off or "self-cancel". This can be used as a guide for W203 or 2001-2007 Mercedes C-Class Sedans.
You'll need just a few tools:
- Torx T30
- Torx T10
- Flathead Screwdriver
- Breaker Bar with 10mm hex

[@omarcolwell6978]

Thanks to do it simple, easy and fully explained! This fit with c240 w203 2002 also. Was seeing tons of awful videos trying to take out the steering wheel and, if I follow them, sure will get damage my car electrics. Continue do in it like this! THANKS AGAIN!!!! A real pro!

[@samsizer9093]

Great instructions, thank you.

[@brianneal8640]

I followed the instructions although the clips on the air bag were different slightly ,they didn't unclip the same but with a bit of fiddling around got it to work, everything else worked fine and when I connected the battery again everything lit up as before and no fault messages at all ,many thanks and I saved about 300 bucks

[@yogeshshrivastava1943]

Wow, one of the best instructional video I've ever seen. Thank you.

[@tradtony]

This is a great video,I use a lot CZcams instructions,this is clear,concise and very explanatory,good work!

[@SkylahSengvilay]

Thank you for creating this video. Extremely helpful and it’s easy to follow. Thank you again for taking the time to create this video.

[@romeohulu9194]

Thanks for the video! It was easy to follow and just swapped the switch out myself. God Bless 🙏

[@moneymikeslickwill8749]

You sir are the real mvp much thanks and may god bless you

[@ashleyrowe2945]

Did this job as per the video , exactly as shown , excellent instructions, many thanks !!!

[@runeemblemsvag987]

Thank you for sharing. It helped me a lot when I just replaced my switch today.

[@radmansa5514]

Good clear instructions, thanks for sharing

[@japanyoucan8544]

Thanks, nice clear instructions 👍

[@Jeremy64444]

Good video, thanks it was a great help. Just two things, You should fit the locking piece before you remove the airbag squib. And if you remove the plastic clips over the switches first. You can remove the airbag squib and the steering angle sensor as one piece, which means the copper connections are not exposed.

[@aleks0001]

Great video, very clear :)

[@jacjab9153]

nasze wspaniałe autka , i bezpieczna jazda dla siebie i innych

[@alexandervanwyk7669]

Your video is superb, thank you so much for posting. Ill try it on my 2003 A190

[@andrehuntley9228]

Very helpful thanks for the info...

[@johnh2937]

Excellent! Thank you very much.

[@Portispro]

Hi after I did this procedur, the srs, esp and bas start to shine, I took it to a work shop but they could put the light out.. they didnt have the oem mercedes software but they clamid that something is wrong with the esp, airbag and brake sensor, any idea what have could happend?

[@jimbennett5595]

Great video buddy