Bro you are a life changer. I played sf6 on mediocre graphics thinking I couldnh't get the game to look good and you just changed my life forever lmaooo my game looks so good now thanks broo, never delete this you changing lives with this one👍🤣
Glad it helped you out! I get it; that’s why when I figured it out I was like I bet there are others needing the same. This video isn’t going anywhere 😎
Very helpful video thanks mate. Booted the game up and it ran terrible and looked terrible after using these settings it looks great and is running at locked 60fps no issue at all!
I would leave vsync on, it barely hits on the performance. Aside from the mesh and texture setting, I just turn the rest off/set the lowest possible (except shadows, those on low and ambient occlusion on). Ambient occlusion is the key so the game doesn't look too bland. Good video though, it was very helpful.
Thanks 🙏🏾 I’m just used to turning vsync off in almost every game and using RTSS as for some time it produced better results in the frame pacing, although with VRR in-game limiters can do just fine and may produce slightly lower input lag. You can also turn on the gsync compatibility in RTSS and mitigate that as well.
I don’t know why this is still a problem for CAPCOM, Re: Engine has been in development for almost 9 years and they still haven’t fixed this VRAM graphical bug yet.
At this point, they can’t be bothered lol. It’s pretty horrendous to look at and kept interfering with the immersion for me. I’m due for an upgrade soon, so this will hold me down until then, when I finally have enough 🥹
Yes the mesh quality setting is the crutch for a 4GB card. Enjoy playing on the laptop! I e been doing it for a few years now and just about to build a PC for future content!
I’m using a Ryzen 4600H with a max 4GHz clock. It’s a mobile chip, so I won’t be able to go further than that with it, save to undervolt and bring some temps down, but it normally sits at that speed around 68-72°C
can you help me pls if you can,how did you configure RTSS to work properly in SF6,cuz in-game vsync eats too much fps,but screen tearings are annoying aswell
Hmm, I’m not sure what to do outside of adding the SF6.exe to RTSS and making sure that NVIDIA Reflex or AMD equivalent is enabled in the settings. Considering if it can hold 60 FPS, you shouldn’t be getting screen tearing. Maybe the occasional dip during a super or the text at the end of the match, but not tearing. Also make sure your monitor is at 60Hz or has VRR enabled.
@pikinderus9512 so what’s happening is regardless of what you attempt to do there’s always gonna be some kind of screen tearing because it’s not matching the refresh rate of the monitor unless you had a variable refresh rate monitor so what you’re going to have to do is either the CRU tool or just on your monitor settings in the window settings for display settings you can set the refresh rate to 60 Hz and you shouldn’t see any of that problem anymore
No problem and if you’re still finding it a bit difficult to make that happen then let me know. I can find some time to make a video for it, just not sure how soon
Let me know if this helps you out on your rig!
Bro you are a life changer. I played sf6 on mediocre graphics thinking I couldnh't get the game to look good and you just changed my life forever lmaooo my game looks so good now thanks broo, never delete this you changing lives with this one👍🤣
Glad it helped you out! I get it; that’s why when I figured it out I was like I bet there are others needing the same. This video isn’t going anywhere 😎
you are a SAVIOR. i've been playing this game for a year with these muddy textures. amazing, sub earned
Glad it was helpful! My eyes were hurting too 😂
Very helpful video thanks mate. Booted the game up and it ran terrible and looked terrible after using these settings it looks great and is running at locked 60fps no issue at all!
That’s what I’m talking about! Now you can just focus on the actual matches 🫡
Dude you saved my game! I have about 200 hours in SF6 and you made me realize I can play without those N64 looking textures haha.
🤣 I’m glad you can play in the modern era now!
I would leave vsync on, it barely hits on the performance. Aside from the mesh and texture setting, I just turn the rest off/set the lowest possible (except shadows, those on low and ambient occlusion on). Ambient occlusion is the key so the game doesn't look too bland. Good video though, it was very helpful.
Thanks 🙏🏾
I’m just used to turning vsync off in almost every game and using RTSS as for some time it produced better results in the frame pacing, although with VRR in-game limiters can do just fine and may produce slightly lower input lag.
You can also turn on the gsync compatibility in RTSS and mitigate that as well.
this fixed my oom issue
Tried exactly the same settings (except I left vsync on) on a 1650 super and it works perfectly. I love you
Much love 👊🏾
Doin god’s work for us 1060 users
I don’t know why this is still a problem for CAPCOM, Re: Engine has been in development for almost 9 years and they still haven’t fixed this VRAM graphical bug yet.
At this point, they can’t be bothered lol. It’s pretty horrendous to look at and kept interfering with the immersion for me.
I’m due for an upgrade soon, so this will hold me down until then, when I finally have enough 🥹
This did it for me ❤ thank you so much ❤ 😊
Glad it did the trick for you!
Sir let me say, thank you, I bought a laptop with a 3050 to play this on the go but it was looking awful, it was due to mesh quality.
Yes the mesh quality setting is the crutch for a 4GB card. Enjoy playing on the laptop! I e been doing it for a few years now and just about to build a PC for future content!
Seems super helpful! I’m trying to come up with a $300-400 pc to run with this tekken 8 and guilty gear. Curious what cpu you got ? Thx man 🙏🏻
I’m using a Ryzen 4600H with a max 4GHz clock. It’s a mobile chip, so I won’t be able to go further than that with it, save to undervolt and bring some temps down, but it normally sits at that speed around 68-72°C
@@imAgentR thank you!!
This vedio helpt so much ❤
DUUUDE THANK YOU SO MUCH
You’re welcome! Now get after it in season 2 on the ladder! I’ll see you there 😎
can you help me pls if you can,how did you configure RTSS to work properly in SF6,cuz in-game vsync eats too much fps,but screen tearings are annoying aswell
Hmm, I’m not sure what to do outside of adding the SF6.exe to RTSS and making sure that NVIDIA Reflex or AMD equivalent is enabled in the settings.
Considering if it can hold 60 FPS, you shouldn’t be getting screen tearing. Maybe the occasional dip during a super or the text at the end of the match, but not tearing.
Also make sure your monitor is at 60Hz or has VRR enabled.
@@imAgentR im sorry, so i have 75hz monitor, do i have to set it to 60hz?
@pikinderus9512 so what’s happening is regardless of what you attempt to do there’s always gonna be some kind of screen tearing because it’s not matching the refresh rate of the monitor unless you had a variable refresh rate monitor so what you’re going to have to do is either the CRU tool or just on your monitor settings in the window settings for display settings you can set the refresh rate to 60 Hz and you shouldn’t see any of that problem anymore
@@imAgentR ok thx
No problem and if you’re still finding it a bit difficult to make that happen then let me know. I can find some time to make a video for it, just not sure how soon
the fact that I can run this on a gt 1030 at 60fps no drops is amazing
That’s wild lol
Thanks
How much ram do your PC have .
System ram? 32GB.
The GTX 1650? 4GB vram
@@imAgentR Sir, I have only 16 GB Ram with 1650 graphics card. Can, I play street fighter 6 with your above shown settings 🤔🤔🤔.
@26_jyotishmanbaruah_cse85 you’ll be fine. 16GB can handle the spill over from the 1650 to the system ram playing this game.
❤❤❤❤❤❤
GRACIAS
modern
Dial M for modern