GR86 Gets Enkei Wheels
Vložit
- čas přidán 14. 04. 2022
- Keri decided to get set of Enkei NT03 wheels for her 2022 GR86!
Wheel Specs: Enkei NT03+M 18x9.5 +40
Tire Specs: Continental Extreme Contact Sport 245/35/18
Coilovers: Silver's Neomax Standard Kit
GET YOUSELF A SET HERE:
www.importimageracing.com/pag... - Auta a dopravní prostředky
I must say the wheel choice plus the car and it's body colour looks absolutely fantastic.
Fitment is great! Love the NTO3
Keri's car is looking GOOD 😍
Perfect fit!
now we're talking, that shit looks good boys!
Can't lie those are some sweet looking wheels
What enkei wheels are those? And how low vs stock height?
Nice bro ❤
Nice wheels but the front offset looks like they poke out to much.
What’s the wheel diameters on this set up??
Got damn!
Ion care what anyone else says the new ae86 looks waaaaye better body wise than the older one
Tpms? Valve stem hole sizes are standard on those wheels?
Yep! these wheels come with 8 new valve stems because they have 2 per wheel. We used 4 of the supplied valvestems and transferred over the oem valve stem and tpms to each wheel.
Would that fitment rub if you still had stock struts?
We didn't test this exact setup on the stock struts so I can't be 100% sure but we know someone running 18×9.5 +35mm with 245/40R18 tire
Stock suspension, it’s close but doesn’t rub!
If i ran those same tires on stock suspension, nothing lowered, is the wheel offset what needs to change (say +45) to make it not rub? Or is it not even possible with 245s on stock suspension
A higher offset would help pull it away from rubbing the Strut but you may get lots of poke. We know someone running 18×9.5 +35mm 245/40R18
Stock suspension, it’s close but doesn’t rub!
@@ImportImageRacing appreciate the response. Btw is that no rubbing on the strut or the fender?
Do you need a spacer for the center bore ? I like my Michelin PS4 not sure they can fit on 8.5....
We strongly recommend the proper size hub ring for your application. What vehicle do you have?
Any spacers used? At 2:20, I can't tell if there's a 20mm spacer in there
No spacers at all
No spacers!
It's because the front camber is set that way. Would look a lot better with some negative camber.
For Toyota GR86 is the 5x100 or 5x114.3? Thank you so much
5x100
@@ImportImageRacing Thank you!
We’re any mods needed to make them fit? Looks great!
Only other modification was a set of Silver's coilovers and Noble lug nuts. But these shout fit on the stock suspension.
@@ImportImageRacing Appreciate it! The wheel offset is perfect, peeks out of the fender just the right amount!
@@ImportImageRacing did you have to roll the fender?
@@semtiq9227 No fender rolling was done.
@@ImportImageRacing this Wheels is 5x108 and the car 5x100?
That wheels are lovely ❤ any driving problems? Thinking in 8.5 but 9.5 don't know😮
No problem once you have silvers neomax and an alignment :)
@@ImportImageRacing perfect thanks bro!
I thought 18x9.5 rubs on this car ?? How many degrees of camber ?
It really depends on the setup. Tire, height, offset, camber etc. This is around -1.5 camber all around. She went with a 245 tire and has no rubbing issues. it would probably rub with a 255.
@@ImportImageRacing Did you need any camber arms?
@@ImportImageRacing When you say that it doesn't rub, do you mean that it doesn't rub under no circumstances? I'd be worried if a single pothole could ruin the car
@@ImportImageRacing do you think I could fit 18x9.5 +38 wheels and 235/40r18 tires on the 2022 BRZ with a 20mm drop without any issues?
18x9.5 +45 fits even better with 245/35/18. 255 requires tab mod, arms, more camber front and rear and fender rolling
Running this exact wheel spec and planning on doing neomax coils as well. But I’m running a 255 tire. Should I be concerned 🫣
Found the next wheel for my gr86😅
Looks really good for the street, but there is no way in hell those do not rub like crazy with any type of hard cornering.
Big hit run to
The car is running 2.5 degrees of camber on all 4 corners, there is no rubbing at all. This video was done pre-alignment though.
sorry 1.5 degrees of camber
isn't that a lot of stretch, 245 on 9.5" wheel? when doing Silver's coils (I like them a lot for the value-performance they offer), or any coils for that matter, do you have to upgrade to Swift springs? why not keep the standard springs? Also, wheels are great, just not in black. Literally any other color would have been better. Black wheels have no personality; they are just dark circles void of emotion. 🏁
Absolutely not, the factory springs are pretty dang good!
Any rubbing?
Not a bit of rubbing at this height, I do think we could go lower if we added a bit of camber but at -1.5 all around there isn’t any run at all on the 245 tire
@@derekgingerich awesome!
@@LiveFast135i the silvers have upper camber plates on the front the rear we did do lower control arms to add more adjustment.
music needs to chill out
Music had to go as hard as the wheels
@@ImportImageRacing wheels are awesome. But the music doesnt fit :D needs some hard ass PHONK