Lifting that Lunar Rock TRD PRO Tundra with Westcott Designs lift
Vložit
- čas přidán 1. 08. 2024
- This gentleman drove all the way from New Mexico which is about 6 hour drive to allow us to put our lift kit in his 2021 Tundra TRD PRO he also ordered a set of our TIG welder DOM 0° with top plate rock sliders about four or five weeks ago and had those installed at the same time. We wanted to share the out come with you. Please subscribe to our channel and we will share more videos with you here in the future
- Auta a dopravní prostředky
Thanks for talking about the 0 degree rock sliders some! Those are what I am hoping to put on a 2022 Tundra in the near future!
Sweet set up!
Love the rock sliders!
Thank you!👍
Putting my kit on next week with the 35/12.5/18 KO2s. Can't wait ☺️
You will love it! Keep us posted!
@@westcottdesigns got the lift put on. The tire shop couldn't fit the KO2s on the wheel due to it being to narrow for the 35-12.5/18" OEM wheels.
I went with the 285/75R18 Goodyear Wrangler Duratrax
They clear the UCA and don't rub in the wheel well.
Very nice
Thank you!🙏
that's a sweet lookin' truck! Nice work guys!
Thank you!🙏
@@westcottdesigns To lift the rear, does it come with an add a leaf, since the 2021’s are still running leaf springs.
@@RoninWarrior1776 We offer a front only kit so you can run an ad leaf on your own
Look just like my lunar rock.
brother i have a '21 lunar rock trd pro. This stance is definitely happening soon.
Which kit is this? I was think about a ToyTec lift but I like yours more and more
No body mount chop needed on this? Can you link to the lift kit used in the description?
What did you use in the rear of the truck?
Do you have a part number for the lift kit ? I looked on your website and couldn’t find a 3inch one for the Trd pro
How’s the ride quality?
Hey Jeff. Great job. You're getting better. You only said umm 20 times in this video
Those pet words in public speaking 😂
Is the a true 35? Or a 295? Thanks
Can 35/12.5/18 Nitto Ridge Grapplers be used and not rub like the KO2? I also have a 2021 Tundra Trd Pro and I’m thinking about using your set up to accommodate the Nitto tires. Thank u!
The KO2’s don’t rub. They are super close but don’t rub. The Ridge Grapplers have a more aggressive side wall and will rub unless you run wheel spacers.
Where can I get this in Nashville Tn
Any trusted dealers/shops out in North Carolina near Fayetteville? I want to run this similar set up on my 21 Tundra TRD Pro with 33’s. Current set up is stock TRD Pro suspension with 285/65/18.
How close are you to Sparks Toyota?
How much do you charge to install this lift kit? Local place in Augusta, GA wants $700 just to install the kit I purchased which I think is ridiculous.
Not sure what they charge hourly but by Toyotas book time it shows 3.5 hours to R&R front struts and 2 hours to replace rear springs on a 4Runner and if it’s a tundras or Tacoma they show 1.2 hour. So hope this helps. It will also need a alignment as well.
Nice looking rock sliders. Do they come in black?
These are in texture finish and is color code bk59.
Do you have any connections to someone in Nashville that can install your kit in the front? I would like to get my '21 Tundra TRD Pro lifted with this kit and the CB shackles.
Let me check what dealers we have in that area
@@westcottdesigns thank you! I just want the job to be done right if they have experience with your lift.
@@westcottdesigns Any update if you have any dealers in Nashville?
is it leveled? to me it looks a tad bit lower out back
It’s because the angle of the camera. If the video was done from the rear corner it would have looked higher in the rear.
Where can I get the westcott lift in San Diego? I want this setup on my 2019 Pro
If you call 88rotors they keep our kits in stock and install them daily!👍
Thanks for the reply and information. I’ll give them a call. Does that setup give any tire poke?
@@surfnick58 it will with the right offset wheel.
any dealer or shops in the seattle area that install your lifts?
Michael’s Toyota of Belview
@@westcottdesigns oh that's perfect!!! Perfect! that's who I've been talking to to get Bilstein 6112's installed on my 2020 Tundra.... Thanks for the quick response!