How To Replace Inner Tie Rods 01-10 GMC Sierra 2500 HD
Vložit
- čas přidán 13. 09. 2024
- Buy Now!
New Tie Rod Set from 1AAuto.com 1aau.to/ia/1ASF...
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, or damaged tie rod. Tie rods are essential to your vehicle. They often wear out over time and need to be inspected for safety. A bad tie rod will also cause your vehicle to fail inspection, and cause premature and uneven tire wear. We'll show you how to check for play and also replace your tie rods. This video is applicable to 2000-2007 Chevy Silverado and GMC Sierra models.
🔧 List of tools used:
• Grease Gun
• Adjustable Wrench
• Torque Wrench 1aau.to/oru/1AX...
• Bearing Grease
• Liquid Thread Locker
• Paper Towels 1aau.to/ofW/1AX...
• Floor Jack 1aau.to/opN/1AX...
• Jack Stands 1aau.to/op3/1AX...
For More Info visit us at 1aau.to/h/aRo/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You guys are the reason CZcams is such a game changer for the DIYers. Love the detail and help.
Honestly I go thru and watch literally like all the videos on 1a just to learn it all and it's very helpful.
+Blaine Meyer Thanks for checking us out. 1aauto.com
This was the best video I ever seen for chevy Silverado thanks
Simple, clear, well-produced video for us DIYers. This video gave me the confidence to get the job done. Thank you!
+Chris Papademetrious Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
This was the best video I ever seen for inner tie rod for chevy Silverado
i personally would have installed the inner tie rod end into the outer tie rod end then installed the inner tie rod end to the control arm, so i didnt have to fight the long threaded end/inner balljoint with a wrench the whole way. but you got the job done right the way you did it too.
I'm having a hell of a time trying to thread the end in. Jacked up the control arm and the stabalizer bar is still preventing me from getting a straight shot. Im about to set it on fire
I had hell too. The solution is to remove the sway bar links on both sides until you've gotten the inner tie rods replaced, then put the sway bar links back.
Thank you very much, saved me $220!
Thank you for all your awesome help videos
So the question is, how do you set the length between the inner and outer tie rod if the inner tie rod is bent all up? Can you just measure the other side?
As much as love the videos you should have changed the outer tie rod as well when it’s that easy to move it’s junk as well and that bar that the inner tie rod connects to is called the the sway bar
Thanks for posting this vid . I just found the same problem in my 2000 Silverado , the drivers side has just enough play to feel a bump when you move the tire. This will come in handy .
the best video ever....thanks.
You guys make great repair videos! Thank you for sharing your knowledge, and doing what you do!
You’re welcome! Thanks for tuning in 1aauto.com 866-403-3393
Great video, but you called out the torque of 70-80 ft lbs but didn’t use a torque wrench. Must be your calibrated biceps.
just need a big pipe wrench to remove the old one. I used a 1 1/2" claw with a 1/2" torque wrench to reinstall. skinny zip ties work the best for the inner rubber boot. Moving the rack side to side made it much easier to work on the inner tie rod end.
excellent video thnk you
thanks alot guys
Thank you for this video it helped a lot
Marcos Borja You’re welcome! Glad we could help 1aauto.com 866-403-3393
Super helpful thanks yall
thanks for the video, very helpful!
+Skyler Nemelka Thanks for watching. 1aauto.com 866-403-3393
First off great video!!
I ran into a problem. I replaced the passenger side without a problem, but the drivers side i cant get loose. Is it reverse thread?
+Yaremy I Thanks for watching! It should not be reverse thread for the opposite side, but since it is on the opposite side you will want to turn it the opposite direction!
I need to know how to replace the outer tie rod
What would be a fare amount of time to do this per side like 45min to 1 hr?
That is a huge help thank you
+Mike Realini Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Thanks for that info it helped alot
Do I need to make the aligment after ??
Is that red thread locker on the tie rod threads? I'm trying to figure out what to use, and internet forums are all over the place on red, blue or none at all. I would use at least blue... is red what the factory uses? I had to use my big adjustable wrench and use my foot while laying under the truck to loosen the tie rod... if that's how strong red goes on I'd be alright using it, but if red is stronger than that I think I'd rather stick with blue.
Blue is aslo strong little less than red but very strong still
You local auto parts store should carry grease cartridges and a grease gun.
Is it the same process for a 2000 Chevy Silverado 1500 had
+Mario Rivas The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
I have a 2002 chevy silverado 2500hd when I turn left it squeaks. Could it be the tie rod?
+Tony Thompson We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Super helpful. Do you sell heavy duty tie rods for 2004 K3500? Jason
+Jason Copeland Thanks for watching, but we only sell the OE spec tie rods for your 1-ton truck! 1aauto.com
is it the same for a 98 gmc 1500
Wow, very simple. Thank you!
+Badman Thanks for wathching. We carry the new tie rod shown in this video on our website. Here's a link to them www.1aauto.com/1A/TieRodsSleeves/Chevy/Silverado1500/1ASTE00089?CZcams&CTA%20Comment&ATony
thank you guys I'm gonna do it by myshelf
Is same thing for colorado 2005???
Thank you for watching. The process may be a little different. We will keep this vehicle in mind for future videos.
1aauto.com 888-844-3393
And you don't actually use sized wrenches why?
+Xmus Jaxon Flaxon Waxon The inner tie rod end bolt requires a specialized socket which may be rented at a local auto part store. We used the adjustable wrench to ensure that if you do not have this socket, the replacement may still be completed.
Worst shop towel I've ever seen 🤣