There is a motor inside it, The reaction when start and stop shows that there is an electrical motor inside it and a worm gear shaft or screw shaft actuated by the motor to convert the motion to linear
What is the speed on this particular model used in this video? I know this is no longer available, but I need same type actuator with that exact speed. Thanks!
Hello PF, The discontinued model in this video travels at 3.00"/sec. However, we do have a similar PA-15 model with a 22 lbs dynamic force rating. This will have a speed of 3.15"/sec. You can view this product here: www.progressiveautomations.com/products/tubular-high-speed-linear-actuator
The overall maximum and minimum length dimensions are permanent, depending on the stroke length you choose. However, the linear actuator can be stopped at anytime along the stroke movement by cutting off power thus controlling the depth. The speed can be controlled by changing the voltage level applied to the actuator. You are able to get the maximum speed at 12.0VDC and anything below will reduce the speed. The easiest way to accomplish both of these is through the PA-25 control box. By setting the remote control to "momentary", the actuator will stop movement as soon as you release the button on the remote and the knobs adjust the voltage applied. www.progressiveautomations.com/pa-25 If you have any further questions, please feel free to e-mail us at sales@progressiveautomations.com. Thank you!
Hi there! We previously wrote a similar article on how to properly install a truck topper lift using our Mini Linear Actuator here: www.progressiveautomations.com/blogs/stories/truck-topper-lift-system If you have any questions, please feel free to reach out to us!
Hi Shane! Individual parts of our actuators come from multiple manufacturers, which is then inspected for quality control in our warehouses in Richmond, British Columbia and Arlington, Washington before shipping them out to our customers. Hope this helps! If you have any other questions, please feel free to reach out to our team!
Hello, Unfortunately this control box model is discontinued and no longer produced by Progressive Automations. However, we do have alternative dual-channel control boxes, such as the PA-22, PA-30, and more. Check out our line of wired and wireless control boxes here: www.progressiveautomations.com/collections/control-boxes Thank you,
Yes these are 12 VDC Actuators. What you are trying to accomplish maybe possible. Please give us a call and we can go over your requirements and determine if this will be possible. Our Contact number is 1-800-676-6123. Thanks,
I like your video very much. It's really great. I'll keep an eye on your channel. I am your fan and I will support you.
Thank you, cheers!
There is a motor inside it,
The reaction when start and stop shows that there is an electrical motor inside it and a worm gear shaft or screw shaft actuated by the motor to convert the motion to linear
What is the speed on this particular model used in this video? I know this is no longer available, but I need same type actuator with that exact speed. Thanks!
Hello PF,
The discontinued model in this video travels at 3.00"/sec. However, we do have a similar PA-15 model with a 22 lbs dynamic force rating. This will have a speed of 3.15"/sec. You can view this product here: www.progressiveautomations.com/products/tubular-high-speed-linear-actuator
This piston depth and speed is controllable or not.? Means I wonder if it could provide 100compression/min...?
The overall maximum and minimum length dimensions are permanent, depending on the stroke length you choose.
However, the linear actuator can be stopped at anytime along the stroke movement by cutting off power thus controlling the depth.
The speed can be controlled by changing the voltage level applied to the actuator. You are able to get the maximum speed at 12.0VDC and anything below will reduce the speed.
The easiest way to accomplish both of these is through the PA-25 control box. By setting the remote control to "momentary", the actuator will stop movement as soon as you release the button on the remote and the knobs adjust the voltage applied.
www.progressiveautomations.com/pa-25
If you have any further questions, please feel free to e-mail us at sales@progressiveautomations.com.
Thank you!
i need a simplified control for a tritex actuator. do you guys have anything. ill be using a Redlion g303 HMI
Will these work good for opening and closing a car trunk
Hi there! We previously wrote a similar article on how to properly install a truck topper lift using our Mini Linear Actuator here: www.progressiveautomations.com/blogs/stories/truck-topper-lift-system
If you have any questions, please feel free to reach out to us!
What make is each component? And how much do you estimate for the lot?
Hi Shane! Individual parts of our actuators come from multiple manufacturers, which is then inspected for quality control in our warehouses in Richmond, British Columbia and Arlington, Washington before shipping them out to our customers. Hope this helps! If you have any other questions, please feel free to reach out to our team!
What is the diameter of the actuator here, outer edge to edge?
Hello
The diameter of our PA-15 linear actuator is 2.16 Inches.
Best Regards
Whats the name of the control box
Hello,
Unfortunately this control box model is discontinued and no longer produced by Progressive Automations. However, we do have alternative dual-channel control boxes, such as the PA-22, PA-30, and more. Check out our line of wired and wireless control boxes here: www.progressiveautomations.com/collections/control-boxes
Thank you,
Yes these are 12 VDC Actuators. What you are trying to accomplish maybe possible. Please give us a call and we can go over your requirements and determine if this will be possible.
Our Contact number is 1-800-676-6123.
Thanks,
You got motor and gears. About $157.
How can I order that setup.