Can we please get a OG gauntlet competition with all the machines please please please. We need to update the times on the garage door. Set up a fund raiser for it. I'd pay to see that. Was the best content ever 🤌
Good to see the oil filter is in the same stupid place it is on my 1500 with the 5.7. Glad you fancy truck guys feel the commoner pain on filter change lol
you all have some great content going the raptor idea is absolutely great I'm enjoying the videos and it makes me want to watch the next one for sure keep up the good work you guys wish I could join you
Leo please consider a tune on the TRX. I haven't seen this particular brand of overdrive pulley but diag'd a misfire on a used Hellcat Challenger recently. Guy bought it used and didnt know it was installed. Found it after we noticed both long/short term fuel corrections were maxed out. Let's just say the borescope revealed it probably wasn't enough. The TRX is more than slightly heavier than the Challenger too, I'd be careful. Love the truck though and enjoy the hell out of your content.
So it's late now but a article I was reading said there is a fuse you can pull to disable the awd for 2 wheel dyno. Probably more to it but apparently it's pretty close to trackhawk stuff. Anyway🤙
Just FYI, the crank pulley is not pinned from the factory, and I have seen a pulley spin on the crank. The fix at a dealership would be to replace the engine... That would not be covered...
Im only a couple min in the video. But feel like the cnc pully will slip the belt. We have had the issue. If it does, get the groves sand blasted. Fixed the issue with our supercharged cars.
Both torque and hp dipped in the same spot. I'm guessing it still hasn't got the fuel / air mapping right yet. Drive it for a few days then do it again. I'd bet that curve smooth's out. Maybe even more hp.
20% loss puts it at 730 crank (584/0.8=730). It's about 17% low from the 702 factory rating, seems about right. Crazy how much horsepower it was losing from being hot, turbos>superchargers! My tuned 3.5 EB can run again and again and again and be consistent (bigger intercooler and e30 running low 12s).
I've seen too many dusted engines over the years from k&n, etc to recommend these. Don't know if they weren't oiled right or not but they sure let fine dust in. The rings do not appreciate the extra friction.
I don't know that marking the drive shaft matters much i mean it's not balanced on the vehicle I guess If you noticed some vibrations or something after you might flip it but otherwise I don't think it matters
Leo goes lmfao he goes "run it up slow will see if it explodes or not" haha I'm fucking crying hahahaha, also before that you go "Doug at the helm so if something goes wrong definitely not my fault" the camera pans to Rich he goes "the best way to do it " 👌 100% hahahaha fucking dieing laughing you guys crack me the fuk up
Is that truck all wheel drive? If it is 4 Wheel drive, why do you have to remove the drive shaft? I thought that's what a Transfer case is for, I'm confused.
100k cameras dont work with the sun shining in eaither. you would need to light the interior with HMIs which are daylight then you can shoot out a window. the good lights (joker) are more than your current camera.
I would love to see Doug's 70's model ford truck on the dyno out of pure curiosity!
Can we please get a OG gauntlet competition with all the machines please please please. We need to update the times on the garage door. Set up a fund raiser for it. I'd pay to see that. Was the best content ever 🤌
I agree with this statement
This is all true. The gauntlet has been neglected and a great measuring stick for the vehicles and you all as drivers.
@@KSH243 it's super fun to watch as well. The competition is my favorite part. Plus the nostalgia
I second this motion
I third it!!!
Great to see you guys back!!! last couple vids have been bad ass!!!
This video felt like old school sxsblog working on stuff videos. Keep this up. Great video. Always great commentary.
Definitely accurate, my TRX made 583 at the wheels on the stock tune.
That 150 degrees had me on the edge of my seat
Good to see the oil filter is in the same stupid place it is on my 1500 with the 5.7. Glad you fancy truck guys feel the commoner pain on filter change lol
you all have some great content going the raptor idea is absolutely great I'm enjoying the videos and it makes me want to watch the next one for sure keep up the good work you guys wish I could join you
Here me out, $4k budget sxs challenge. Top gear style.
Automotive technician my entire life but, Oil containers and Buttered toast are alike in the sense that they ALWAYS fall Butter/Oil side down.
My guess was 618hp with the upgraded pulley, pretty dang close! Good gains for a few hours of work.
That truck is comically big. I love it!
Leo please consider a tune on the TRX. I haven't seen this particular brand of overdrive pulley but diag'd a misfire on a used Hellcat Challenger recently. Guy bought it used and didnt know it was installed. Found it after we noticed both long/short term fuel corrections were maxed out. Let's just say the borescope revealed it probably wasn't enough. The TRX is more than slightly heavier than the Challenger too, I'd be careful. Love the truck though and enjoy the hell out of your content.
It's a sweet ride hope there will be more updates and maybe some body workouts the cornersand Tire dual exhaust maybe x pipe
Hope to see the old mud truck and banchees make an appearance
Man sometimes I watch you guys work harder and not smarter with rachets 😂
RIPATUNED grew up a town over from me when I came up.. guy has really made a name for himself.
Those TRXs are fricken amazing. What a unit!
so glad im subbed to both channels.
That was fun. Good video guys
So it's late now but a article I was reading said there is a fuse you can pull to disable the awd for 2 wheel dyno. Probably more to it but apparently it's pretty close to trackhawk stuff. Anyway🤙
Just FYI, the crank pulley is not pinned from the factory, and I have seen a pulley spin on the crank. The fix at a dealership would be to replace the engine... That would not be covered...
Drunk on a Wednesday. Gonna regret this in the morning. But this video makes it worth it
How was your morning?
The slowmo "Richard please" had me dying
We’re into deep now we gotta keep going I’ve said that many many times I love it!
Awesome!
Let’s see some mods to Doug’s Raptor next.
Why. It’s a ford.
@@josephholtrop5535 Why not. Its still fun to mod vehicles, and it would be less ford stuff if its getting upgraded.
Headers are really good set of dual exhaust and I'm telling you you put the right tune on that old girl and that thing will see 700 horsepower I think
I agree also
Very nice !!!
Damn I must have been super tired to have missed this gem
Im only a couple min in the video. But feel like the cnc pully will slip the belt. We have had the issue. If it does, get the groves sand blasted. Fixed the issue with our supercharged cars.
Was there ever a SXS blog video of the Cletus racing event in Indians a few weeks ago. I thought I heard Sous finished second in it?
Give the people what they want we want to see the thumb Matt come onnnnnn 😂😂
What is the t-case in this trx? Is there a tag number on it? Can't wait to see some dyno numbers!!!
Great video yall 110 10/10
WRECKING CREW!! Yall Wrecked Matteo
Both torque and hp dipped in the same spot. I'm guessing it still hasn't got the fuel / air mapping right yet. Drive it for a few days then do it again. I'd bet that curve smooth's out. Maybe even more hp.
Got my logistics shirt hoping to get that trip if not it was nice helping yall out frfr
That’s a big number. Dawg!
I saw that the ac compressor clutch was engaged when it was running eating about 10 hp`s
Love that TRX! Let’s see a build up of the Raptor and see a Dyno run!!
How to make a fast engine slow. Put it in an ugly, large, 5k pound utility vehicle instead of a real car. The world laughs at you.
That’s a great number but just for prospective reasons, 2JP doubles that and is a side by side. Omg I wish I could sit in that sit for a hit!
You can make that go faster than that.
RIP Matts thumb, what a legend
Considering a 20% drivetrain loss which is maybe high, at 584 that's 700.8 at the crank which is right on the money.
20% loss puts it at 730 crank (584/0.8=730). It's about 17% low from the 702 factory rating, seems about right. Crazy how much horsepower it was losing from being hot, turbos>superchargers! My tuned 3.5 EB can run again and again and again and be consistent (bigger intercooler and e30 running low 12s).
Sweet
Does Leo hate his truck? Yes. Do we want to see him keep abusing it? Also yes.
On 4th gear. That TRX is super fast.
Nice Leo!
If the sxsblog boys were the seven dwarves we all know who would be bashful 😆😆
That is a pretty awesome hoodie
Cant remember but did yall already put a cold air intake on the truck also? Maybe might add a few more horsetorques!
I've seen too many dusted engines over the years from k&n, etc to recommend these. Don't know if they weren't oiled right or not but they sure let fine dust in. The rings do not appreciate the extra friction.
Matt gets it👌
I can't believe the way the underside of that trx looks already.
Not bad for a pick up truck!
all good centent
I was thinking about 580 because drive train losses are not a percentage they are pretty much a constant and then maybe a slight percent
I’m guessing the TRX must be all time AWD? If so I didn’t know that I just assumed you could switch between 2 and 4wd
Hell yea
Kids being kids in the background 😃 classic sxsblog W
Torque management is pulling the power back.
i seen that as well. needs more octane...
Pro charger on the new raptor?🤔
Cleeter called you out raptor vs raptor!!!!! 😎
Lucas oil FTW 😎
what is the Doug pounds to Matt pounds conversion factor?
Hey man! How’s the incognito pulley holding up? I’ve heard that there is a common squeal. Any in your case?
I don't know that marking the drive shaft matters much i mean it's not balanced on the vehicle I guess If you noticed some vibrations or something after you might flip it but otherwise I don't think it matters
You guys gona roushcharger that 6.2 raptor you got last video !? And smoke that dodge!
It's says on Dyno screen - max power and torque at engine, not wheels 😉
Send the truck to srt autoworks in arizona for more power. They have a super fast trx now
Leo goes lmfao he goes "run it up slow will see if it explodes or not" haha I'm fucking crying hahahaha, also before that you go "Doug at the helm so if something goes wrong definitely not my fault" the camera pans to Rich he goes "the best way to do it " 👌 100% hahahaha fucking dieing laughing you guys crack me the fuk up
I just gotta say.. u guys are fucking hilarious!
Drag race between the TRX and both the Raptors
Matt gave his thumb for this project, thx Matt 👍👍
Hmm... SxS blog logo bandAids?
Heck yeah dudes
Is that truck all wheel drive? If it is 4 Wheel drive, why do you have to remove the drive shaft? I thought that's what a Transfer case is for, I'm confused.
Leo get a case of fluid film and undercoat that thing
Legit commenting as watching please please chuck those wheels in the future
That's what she said
Check out srt auto works in Phoenix if you really wanna do more stuff to it 1000+ hp package lol
Here come work on my truck while I record you…… I need friends like yours lol
Greene Racing!!!
My guess is 412 horsepower to the wheels
That # is not factored the same because you don’t have the drag of the front driveshaft, so the dodge # might be right
I just saw a build you guys should do with Lil guol, but I can't post pics
the real kagabutan laki laki
Im sure you will feel the extra 30hp after you get rid of 3 extra passengers. That negated what you would feel.
You need 22-25psi for it to feel fast.
So are we taking her to Frankie's or what
Air con was on
pull the abs fuse its an extra 20hp dead serious
I'm at the point of my life I start yelling as well....lol.
Need a clappter dyno vid
All wheel drive will take more.
Come to disney oklahoma !!!!
100k cameras dont work with the sun shining in eaither. you would need to light the interior with HMIs which are daylight then you can shoot out a window. the good lights (joker) are more than your current camera.
Try it in 5th and does that truck not have a selection for two wheel drive
Full-time 4x4
You need to add sxsblog band aids to the merch store.
Didn't the guys get kicked out of the shop, it's been months now.
What's happening with the shop? Are you still booted?
I have got to see that thumb