Mobile NVR how to work with IP camera? IPC work with Hybrid MNVR setup

IPC & Hybrid MNVR Setup Video Script
0:05 Prepare the IP addresses of the two IPC cameras as 192.168.1.14; 192.168.1.15.
Connect the device with an adapter cable and set it up.
0:20 First open the menu and enter the password: 999999 to enter the menu
Select set up then click main stream
0:29 Turn off all 5, 6, 7, and 8 of the last 4 channels, and then click OK to save.
Go to camera then Select record to enter the page,
0:43 Check ipc and select ipc to enter the ipc setting page.
Ipc select 2
Enter the IP address of the ipc below (the ipc needs to be in the same network segment as the device)
Click Confirm to save. Do not restart yet.
0:59 Next set the device ip address
Click Network, then Set ip on local network
1:02 The first one is the device IP, 192.168.1.
The following device network segment needs to be entered as 192.168.1.1, which is in the same network segment as ipc.
1:20 After setting is complete, click OK to save.
Then restart. After the restart, the IPC needs to wait 1-2 minutes to connect.
--
1:55 Next, check whether there is any problem with the IPC. prepare a 6P to RJ45 network port cable which requires power. then connect one end to the IPC and the other end to the router, and then power on.
2:27 After powering on, open the IE browser and enter its IP address. After entering the IP address, it will automatically jump to the login page. Enter its IPC account and password, click login, and then click the main stream to check whether the IPC Normal use.
Mobile NVR how to work with IP camera? IPC work with Hybrid MNVR setup
#IPC #MNVR #mobilenvr #hybridnvr #ipcamera

[@QOHO]

Mobile NVR how to work with IP camera? IPC work with Hybrid MNVR setup