My RC Lawn Mower
Vložit
- čas přidán 15. 09. 2020
- During the 2020 summer being forced by COVID-19 to go into lock-down, I decided to use all this time spent home to be creative. And because I saw my father struggling with his lawn I decided to convert his old lawn mower into an RC one so he can cut the grass without putting any effort. The result and the the step by step fabrication is here for you to watch. Enjoy!
- Věda a technologie
Nice design! I'm thinking about building one, and I like you can adjust the height.
Šaunuolis, Mariau! Kaip tik galvoju kažką panašaus sutverti. Pamačiau keletą įdomių mazgų sprendimų.
Nice work!! Had my RC mower for almost a year and I love it!!!! Looking at making another on using my old segway wheel motors.
Thank you! Yours was nice too. Good luck with the next one! Me too I'm thinking of going for another one, this time a tracked one.
I've had mine for about 3yrs, and I'm now building two at the same time. The two I'm building unlike my first one (which is a rotary mower) are reel mowers based, and one is based on 36v offroad hoverboard motors, and the other is based on 36v wheel chair motors. I'm stuck at writing the arduino code for the hoverboard motor one. However, I plan and hope to get them done sometime soon 😅
@@mariusmiller3982I like the height adjustment mechanism of your rc mower. It very clean looking.
@@AChi__ hit me back when their done!
@@Wildavismedia Certainly
Good job!
Thank you!
Nice one Marius Hope you are all keeping safe
Thank you Clive! All good here so far! Hope you are well too!
Respect, foarte inspirational. Am sa ma apuc si eu de un astfel de proiect.
Mult succes! V-as sfatui sa-l ganditi astfel incat atunci cand intalneste denivelari mai mari, masa de taiat sa se poate misca independent pe verticala pt ca altfel o sa ramana suspendat. (vedeti cum e sustinuta la tractorasele de tuns iarba)
@@mariusmiller3982 multumesc de pont, am sa incerc sa fac cadrul in oarecare relatie cu ampatamentul masei de taiat.
Congratulations Marius for a job well done. The levelling device is a stroke of genius. What do you estimate that this build cost you? Some companies manufacture similar products and costs vary widely but I consider all of them to be expensive. I am wondering whether to do it myself or buy already made and cost is an issue.
Hi, thank you for your appreciation. It's difficult to say how much it cost, as I haven't summed up everything. I would guess somewhere around 500 Euros without man hours :)
Could you please tell me where you get the front wheel
Those are from the original wheel chair together with the cross beam. I adapted the frame for it so it can rotate when encountering a bump.
Where did you find the remote and the module for the motors?😎💪
1. the remote is from a local hobby website www.atelieruldemodelism.ro/Radiocomanda-FLYSKY-FS-i6-2-4GHz-6-canale-receptor-iA6
2. Not sure where the controller is from, but here are the specs:
www.robotshop.com/media/files/pdf/smartdriveduo-smart-dual-channel-30a-motor-driver-datasheet.pdf
Maybe you can source them locally. Good Luck!
how long does your battery last before you have to recharge? nice job!
Jose, I have never tried it from fully charged to fully discharged. My garden is about 800 mp and I can finish it with less than 30 % of charge.
Interesant proiectul. M-ar interesa 2 lucruri:
1. Ce modul de control ati folosit?
2.Cum ati folosit motoarele electrice de la scaunul la care ati facut trimitere. Am si eu 2 motoare ...acum le-am gasit- stiam ca le aveam undeva puse. Eu am pe fiecare 4 iesiri ...fire electrice, 2 de alimentare si alte 2 ptr.probabil comanda veche. Astea trebuiesc anulate?
Multumesc.
Modulul de comanda este SmartDriveDuo-30.
Acesta comanda cele doua motoare prin firele de alimentare. Celelalte doua fire sunt franele electromagnetice. Acestea sunt blocate si pentru a se elibera trebuie alimentate cu un curent intre 5 si 24V .Eu le-am legat direct la baterie. O alta varianta ar fi modulul de comanda Sabertooth 2x32 care are si iesiri pt frane. Franele se pot de asemenea demonta de pe motoare.
@@mariusmiller3982 Multumesc!
Hola Marius, excelente proyecto, me gustaría obtener los esquemas y los diagramas para poder realizar este hermoso proyecto para mi casa. Gracias
棒
Marius, boa tarde, estou pensando em construir um desse aqui no Brasil , você pode me ajudar?
Teria o projeto ?
how do you recharge the battery
you hook it to a battery charger?
Se vede frumos, cand si romanii au ajuns sa faca :)
my controller burn after 15 Minutes
was "make in china"
now i search a better Controller
can enybody help me???
I've had a FLYSKYIA6B 2.4 GHz 6 CHANNELS RECEIVER. I've been using it for my multiple rc mowers without any issues for about 3-4 years now. Good luck.
Bună, poti sa-mi vinzi una
Putem discuta pe email la adresa morariu.marius@yahoo.com