700 HP Top Mount Turbo 370z Overview
Vložit
- čas přidán 1. 07. 2024
- Sorry no official dyno numbers or revs. Tuner compared my numbers in the software for boost level, octane and timing and all that to other Z’s numbers in the 700 hp range and numbers are very similar. Once the 370z is back up I will make a lot more videos and get it dynod for the people who have a hissy fit that it’s not “officially” 700 on paper. My turbo kit is through Switchback Racing and tuned through Admintuning. I don't believe I missed any mods other than a boost pressure fuel regulator.
Update: The z has been dynoed and made 636/518. Roughly 700 something crank hp. I have a dyno video now too.
Follow me on Instagram!
@BoostedVQ_
Mods On The 370Z
- Switchback Racing Unfiltered Turbo Kit
- 6466 Gen II Turbo
- Fast Intentions 34 Row Oil Cooler
- Fast Intentions 3 Inch Catback 18 Inch Resonators
- CJM S1.e Fuel System/ Top Hat
- ID 1300cc Injectors
- Walbro 450 Fuel Pump
- Turboguard Filter
- Aeromotive BPFR
- Southbend Stage 3 Quiet Street Clutch Kit
- Zspeed CMAK Delete
- Fortune Auto 500 Series Coilovers w/ Swift Springs
- SPL Toe and Camber Arms
- Z1Motorsports Rear Diff Cover
- Whiteline Rear Diff Bushings
- AEM Boost/Air to Fuel/ Oil Temp Gauges
- Z1Motorsports Poly Engine Mounts
Update for y’all if you are watching. Engine is being swapped at the moment. Once I get the new block I’ll do some data logs and make some more videos. Try and gap some foos.
Great setup on the car man! i'm a fellow 370z owner and this makes me want to go turbo.. question. why is the engine being swapped?
MrChips005 I blew it up lol. I talked to admintuning and switchback racing and we believe the recirculated wastegate created to much pressure in the downpipe. Almost like a wall and caused the turbo to boost spike 28 psi. Pretty sure I lifted a head. But swapping the engine and going external wastegate.
@@ShayHarambe Wow that must have been a bad day lol.. how much boost were you running?
MrChips005 well on my roughly 700 whp pass when we was finishing up tuning I was running 16 psi. But the pass after that was 28psi.
@@ShayHarambe yeah 28 way too much. but you stated put the wastegate external will address the internal pressure issue. i think 12-15 psi is the most i could conceive of using haha. Anyway, love that pull you make at the beginning. Have you seen fastlanedoug's boosted 370z?
I’m looking to turbo my z also and I’m trying to figure out which kit to get. I’m in-between the boosted performance kit or the soho Motorsports kit. The only problem I am having is I am located in Florida and I don’t know who can install it. I see you’re getting tuned by admin tuning and I was looking to do the same. I’m doing n/a mods for now just like full exhaust intakes oil cooler and tune from admin tuning but I’m not as educated on turbo kits like you are.
Gamesta Gamesta switchback racing isn’t in Florida. To me I didn’t like the idea of having a turbo under the car. Plus I’ve read that twin scrolls don’t work as efficiently when the runners are different lengths. Those 2 things persuaded me out of getting the bp kit. Then soho honestly I just never looked at. I didn’t like how you have like a 2inch pipe and it expands to a 2.5 inch in the engine bay. I thought it looked wack. Dumb reason yeah but idk didn’t like it. With the switchback kit it’s 3inch charge piping all around. It’s a single scroll so don’t need equal length runners as well. It took me personally 6 months to decide which one I was gonna do. Do your research and carefully decide cause it ain’t cheap for sure.
Clean and simple love it
Thank you!! I feel the same way.
Lol I had that thumbnail of your engine bay as a profile/banner pic for a while now and haven’t seen this video, I love this car!
Nice! Switchback is installing my cams this week but in a few months I’ll have him building my turbo kit soon💪🏼
TopGzz37 heck yeah! Switchback is a killer shop.
Beautiful build! Where did you get that lift system? I love that, next closest thing to a lift....
Thank you! Lots more to come. Uhh got it at Costco over Black Friday. It was 1k. You can get it from “Quickjack” them selves but it’s $1300.
So glad to see you making videos again! Can’t wait to see what you put out once the Z is back up... better be taking some fools to gapplebees 😘
Gonna take all the foos! 2 for 1 special lol
I’d go through the entire bottom end. Make it stout with forged pistons & rods while the motors out & save from having to do it again, pay more labor and time, and end up at the same place in the long run. Been there before.
Either way good luck with the fix.
Great video! Looking forward to your new content. I’m actually saving to boost my Z myself can’t wait
Thank you! It’s the only way to go.
Good video bro hope to see that beast up and running soon. I’m currently waiting for my Giken clutch and new ZSpeed CSC delete kit to come in so I can instal the Boosted Performance Turbo kit on my 370Z. I have yet to buy some gauges which is pretty much the last thing I need.
Getting the engine swap now :) that boosted performance kit is so dope. I was stuck between that kit and mine for a long time. I think I saw a video of someone making like 800 something on the bp kit with admin. Did you get that new intake set up Sasha made? I have a buddy with the bp kit without the new intake and during the day his intake temps are low to mid 90s.
@@ShayHarambe the new intake that puts it in the front bumper is where it's at!! lot better AIT's!!
Looking to get a 370 by next summer, in the future id be wanting to go forced induction. I was looking at a 450whp set up on a supercharger because it will be my daily driver, how would a turbo vq37vhr compare to a supercharged one in terms of reliability and cost?
From my knowledge superchargers have come a long way and are amazing. Especially with the air to air kit. They make turbo numbers. If I had to do it again I would have supercharged it. Much easier install. Cheaper. Reliability im not for sure.
BoostedVQ yeah i was looking at some a2a kits, thanks for your input 🙏
I am debating whether I should stay N/A, go supercharged or turbo. My main concern is reliability. I'm hard on my Z but I don't do stupid things such as burnouts or rev limiter attack. I do not want to get into race gas or E85 either. I like to have a reliable car that I can go through gears at max rpm. I like my car but it takes too much time to go through gears and it takes forever to accelerate in the higher rpms in 5th gear. Would you say a reasonably boosted stock block VQ37VHR is reliable or not that much?
I know a lot of people running only 9 lbs for years on pump gas. Making around the mid 500s. They have had no problems. But also taking a na car and adding boost is hard on it
Sounds like a jet taking off!
Hi nice build, have a question - when you mounted the rear tires 295 did you have to change the camber or fit them directly?
Fit then directly. I also wondered about that when I mounted them should I put the camber to basically zero and I emailed around and everyone said leave it at stock camber and toe settings.
Top mount turbos look crazy af
Man I can't wait to have my front mounted twin turbo wide body g37 done this thing is crazy
Very nice. You're definately around 700whp with a Walbro 450 and 1300cc injectors... you definately should look at bigger rears... maybe 325 r888s or straight radials with welds
Fishtailing Z I would love to run something a little thicker. I’m pretty good on traction when I get out of second. I wanna do a freshkiicks or fastlanedoug set up. Te37 in the rear and a radial in the rear.
@@ShayHarambe yeah thats a good look. Expensive... but good. Well if you wanted non-radial. Forgestar has sorta cheap custom wheels where you can go 18x12 or 19x12 with any offset. Personally im saving for some AG Wheels in those sizes.
The Aero Dynamics are so advanced. It really doesn't even have to be a NISMO version because of the shape of the car. A GT-R went over 200 mph on the Autobahn without a wing like hot butter knife on a roll. The 370Z is also the same without the GT-R motor. But it would dominate Porsche with that engine....
❤️
🫠
You can definitely catch people off guard thinking its a stock 370z
Hey man, what was the process of doing your gauges in the factory locations ?
Uhh well there is a proper way and a other way. Proper take the dash out. That’s too much work for me. So what I did was took the hoods off then basically picked at the stock gauges with some need nose pliers till I got all the gauge material out. Ran the wires from the engine bay ecu wire harness spot behind the battery up into the stock gauge location. Then I took the stock gauge plastic and filed them down to fit the new gauges and wrapped them with a zip tie to hold it. Then took a long metal strip and cut it into 3 pieces and drilled a hole in it. Put a one of those metal pieces on it you can thread a screw into. I forget what they are called then drilled a hole through the stock plastic bracket and created a tightening set up. So put the metal piece in the hole in the dash where the gauge was put the screw through the stock bracket then screwed it into the metal bracket and got it tight so the gauge wouldn’t move. Then put some double sided tape on the hood and put it on. It was a long process but it worked and looks good :)
BoostedVQ brooooooooooooooooo ok sooo first man. Dedication lol. Second that was a lot of work too. I can already tell, I need for you to come do mine and put my two gauges in lmaooo. 🤣🙏🏾
Lol yeah it was a lot of work and a lot of thinking on trying how to do it. But it’s not to bad if you ain’t got nothing to do over the weekend.
BoostedVQ I understand that and I see that. Just a lot of little tedious things huh ?
What size AR housing is on the turbo?
Just a little .63.
love the turbo build man! super clean
This is funny. We have the same cars. I have my Nismo and my wife has her Cruze premier both same colors 😂
Hahaha thats crazy!
Is the clutch/light flywheel loud? I am concerned about having my Z sound like its broken when I rolling into the lower gears.
Lol uhh not really. While in neutral you can hear the flywheel chatter.
@@ShayHarambe Thanks for the response. Is retaining the OEM flywheel an option with the upgraded clutch? Clearly not the best choice but I want to examine all options?
@@brianjackson5732 uhhhhhhhhh.... i have no idea. I would just save up a bit more and buy the lightweight bullet flywheel.
So you have to remove everything when you change the plugs, coils, rocker cover?
Yes sir. Kinda a hassle.
hei man .. did SwitchBack Racing install the kit for you ? or you did it yourself. ?
Switchback did it for me. They recommend them doing it cause most of the time it’s built to order and ensuring perfect fit. When I had them install it they did it for free. Idk if that still stands though.
Damnit I should have gone wider with the tires.. I got 255’s up front and 275 in the rear
Lol yeah you can go a lil wider
Hey man man congrats on the supra by the way , I see you 💪 , do you still have this turbo set up ? Would you be willing to sell it !
Thank you! Out here trying to make moves 😂 I do not have it still. I actually sold the car and the kit to one of the two owners of switchback racing.
When is the z gonna be up? Car is sick btw.
Thank you! Currently swapping the engine now. Stock block is out just waiting a gasket. Shipping is a little slow with the virus going around it seems like.
@@ShayHarambe Cool! Excited to see whats next. Subd.
Where are you from? I’d love to come check it out
Florida
and who did your install?
I had it sent to switchback racing. They are the ones who make the turbo kit.
@@ShayHarambe but thats anyway good luck on your channel growth
Thank you! 😁😁😁
Was it stock block before the motor swap?
It was stock block and I put another stock block in it
It was stock block and I put another stock block in it
If I had the 370z how much would this set up cost me ? Everything exhaust turbo entire kit ?
Brother do I have the video for you. Lol I made a exact video on this.
I think I just saw it , 22k?
How much do the build run you prior to the swap
I have a video on that exact topic
Do you have wheel spacers on?
No sir but dang I need some!
Bro just take it to soho motorsports in NC ......it shouldn't be lifting the head if they actually know what they're doing
We ended up digging into what happened and the shop that did the engine swap for me swapped the wastegate lines. So I didn’t make boost when I was suppose to be 😭
Love the build but no air filter on that turbo? I understand that it wont fit but isn't that something to look out for.
Full send! I don’t think anything would have gotten up in there anyways 🤷♂️
Definitely a beast question how much 🤔👍
i have a video that breaks this down
After seeing that this kit boost spiked how does one prevent a boost spike? I am now on the fence about getting this kit
I was running a 4 port mac solenoid when I was suppose to be running a 3 port. Plus recirculating the wastegate was causing a lot of pressure in the downpipe.
@@ShayHarambe So its an issue with the kit?
@@Matt-lf1ik No its not, the mac solenoid I bought myself. I have never worked with those before and from research it seemed like the 4 port was better. If you where to go with this kit though I would opt to go with a twin wastegate set up. The performance shop that swapped the engines for me told me I need to go twin wastegates. Then I talked to another tuner that was more local and I could go to him for a dyno tune said anything over 4 cyls needs another wastegate. So instead of one big 44mm go with a duel 34 or 40.
@@ShayHarambe Thank you. Curious to know what you think of this kit and something like the boosted performance kit. Why did you choose this one over that?
@@Matt-lf1ik a few reasons. I live in florida and it rains all the time. So location of the turbo kit just scared me. Im sure it would be fine. No one ive seen has ever reported a problem of it but peace of mind. Next I watched a lot of freshkiicks he had the bp kit and he start getting limited on boost cause of pipe size. With that turbo kit piping gets limited to two inches to fit everywhere. The switchback kit is all 3 inch charge pipes. Also downpipe its 3.5 inch where bp kit is 3 inch. Visually obviously the switchback kit is a hands down winner. Plus switchback was doing free install and labor. Also piping material. Bp used stainless steel for all charge pipes where switchback used aluminum. Now you may thing corrosion purposes stainless is better which it is. But for heat purposes aluminum dissipates heat better plus I had mine powder coated to protect the pipes. Then back to turbo location I didnt like how it was either a oil less turbo where you grease it which I heard is amazing but its kinda hard to do or get a oil pump and that seems like a hassle where as switchback kit tbe turbo up top and doing need a extra pump. Thats all I can think of at the moment.
Do a video on how much it cost
Lol i did.
Nice 410 hp z your dreaming of you really think it’s over 700
😂😂😂 did you not watch my dyno video?
Where can i contact switchback? I keep getting one in Florida but i read a reply you posted saying it isnt in flordia... i want to top mount turbo my z as well
Contact them through Instagram or Facebook. They are in Florida. I’m not sure what reply your talking about with me saying they arnt. Maybe I did on accident idk. But they are around the Orlando area.
@@ShayHarambe thanks
Which Quickjack system did you buy?
Uhh i think its the 5000slx. Got it at Costco for 1k
BoostedVQ I’m guessing it was completely worth it? Because I saw the lower end version only maxes 3500 I figured just buy the 5000 so I can lift any sedan in the future. Really nice car man. I’m 16k in my build and I’m naturally aspirated, I’ll never see the power you’re making but fun car
@@7eamGhast yeah for sure. I only got the 5000lb one cause thats what Costco had lol. Dang thats a lot on N/A.
BoostedVQ Yeah, lots of JDM stuff. Pretty car but not fast car
BoostedVQ do you use jack pads to lift it up? What size jack pads if so
What turbo did you use brotha?
6062
Where did you get the catch cans set up and also where did you get the lift setup
Catch can set up is through switchback racing. It was made with my kit and included in the kit. The lift I got at Costco for 1k on black friday.
Thanks for the info I like your whip
@@williamharding3059 thank you!
Question, doesn’t top mount mean the intercooler is on the top? Sorry not to knowledgeable in this
They're referring to the location of the turbo. His is top, i built a manifold for mine that puts the turbo in a bottom/ mid mount location. There's pros and cons to both but in the end both locations have proven to work just fine. Just depends if popping your hood to show if your turbo is important or you're aiming to be more low key and keep it tucked outta sight
@@tksever thanks for the clarification, I guess hanging around subi guys made me just think it was about where the intercooler was placed lol
Tk got it on the money
Where do you get that “lift”?
Costco
@@ShayHarambe r u serious?
@@Its_takaa lol yes sir
Yo where did you put your oil return did you tap it into your lower or upper oil pan
I installed a Z1Motorsports oil pan that has -AN connectors for oil return lines.
What intakes are those ?
The 10k intakes 😂😂😂
I threw on earbuds on purpose to hear that beast 😬
😂😂😂
What jack/lift is that?
It’s a quickjack! It’s a hydraulic lift I got from Costco. Every quarter they do a big sale.
The hand tho…. Chill
How much did you spent to turbo the nissan 370z?
About 20k. I have a video of a full breakdown of everything I have.
@@ShayHarambe In your opinion, how many horsepower the stock engine can handle
@@francescosantini2081 if I had to do it over I wouldn’t go over 600. A 550 to 600 would be my ideal range. I believe people call it higher on the forums though.
How much was the entire build?
i have a full build breakdown and what everything cost
What is your total $$ for all mods u did? Did u do all the installations yourself?
I have a video that talks about all of this
If you’re gonna do a pull don’t do it with the windows down when you’re recording if you’re trying to get the “ boosted “ sound it should be able to get it with windows up 😂😂🤦🏻♂️
What was the total bill?
I have a video breaking that down
How much the price for turbo kit
The kit was about 10k
How can u claim 700hp without dynoing it.. like tires, gauges dont add hp
Lol its 700 hp. Not wheel. Ive dynoed it sense then. I made 636 wheel. That to crank hp is over 700. I knew i was over 600 wheel just not sure what.
Its funny you say tires and gauges don't add horsepower like I dont know what I'm talking about. Haha
You in Duvall?
it was a 2014
How much did you get it for
Brother do I have the perfect video for you! I made a video of a full breakdown of everything I installed.
Build engine?
stock block :)
Thanks for the warning haha
😁
Fat turbo lol
AlonsoTheIII yeahhh she a big girl
Was your 1000 sub
Your the real mvp!
@@ShayHarambe Got a big question. I’m planning on boosting my Q50. How much was just the kit with the turbo by switchback racing?
So I don’t remember off the top of my head but I think $9.7k. However I do have a video of a full breakdown of what everything cost.