88 V-Twin Primary noise . Thinking it was the clutches.
Vložit
- čas přidán 20. 08. 2022
- A strange noise coming from the primary area though maybe it might be in the clutch basket but it comes out to be something else . Tighten up the Compensator 140 ft lbs torque .put it back together and it runs great . Problem solved !!
- Auta a dopravní prostředky
You really aught to paint that bad boy yellow too!!! lol Cheers man thanks for the help fixin my crappy chopper
thanks for putting this vid out there and more importantly, thank you for serving our country.
Hey brother thank you for the video very good, love the bike.
Nice workable garage he got there!!
I have a 2005 Fatboy same exact compensator, my spring pack gave out was making a knocking sound replaced it.
Got a new compensator from bikers choice.
Thank you for your service!
There was a spacer missing under the bolt. Part number 29923-01a. I am sure you fixed it by now.
Thanks . I looked back over the video and yes No spacer .. WOW I wouldn't know till you pointed it out , Thanks
Thanks for the video brother, I'm chasing a noise on my 00 FLHT.
SUP 16-4A here.
@ 2:30 you can clearly see that your Alternator rotor is missing the teeth that engage the motor output shaft, probably because of the loose comp. nut.
Yup not only that but hes also missing the spacer that goes after the rotor before the splines shaft.
Lose compensator nut is common on those years and also check the spring pack if you can move those springs at all replace.
That's some really good information. I'm having the same issue with mine. Grinding sounds coming from the clutch area. I'm hoping that's all I have going on in there. About yo find out.
Run a primary belt drive system and eliminate the damn compensator all together
red lock tite on compensator bolt.
Hey, thanks for this video. This might be my problem with my 2014 Road King. I'm getting a clunking sound between when I roll off the throttle and and engine is now on compression. It's like there's play somewhere in the primary. Noticeable between on and off throttle ( if I rock the bike on off throttle.
What's that sleeve called where the big nut was loose?
I had the same problem sounded like rod knock
Im having hell out of mine too I’m thinking about putting the comp eliminator on. Some say it’s bad to run the eliminator but to me it’s worse running with a fkd up compensator right?
I have weird noises from primary there were shaving on drain plug magnet I looked at magneto and there were light shaving on it could it be bearing I'm at a loss
My Yamaha Raider just started making the same dame noise. I checked the pulley, I put my factory light bulb back. Still doing it. Please listen to it on my channel, tell me what you think. It's a short video
I believe there is supposed to be a washer were its rubbing??
That's right, the spacer is missing. I have mine apart right now, and I went to verify. There is a spacer approximately 1/16" on my 2001 88.
Thank you for your service and wisdom
Check out my new video about this
Get a new rotoe this is a common issue