DIY Electric Bike - Power assisted bike at home
Vložit
- čas přidán 7. 05. 2018
- Homemade DIY Electric Bike - Power assisted bike - Pedal assist bike at home
- I am using 24V 350W 400RPM High torque reducer DC Motor
- Throttle Twist Grips 24V 500W Speed Controller : goo.gl/UKPmJb
- 2 * 12v battery
- Sprocket Chain Wheel
Thanks for watching, Have a great day ! - Jak na to + styl
Bit of a tip from an electrical engineer you might wanna mesh the copper wire on your solder joints for less electrical resistance on your circuit you always want direct copper to copper contact if at all possible or your connections may heat up at the solder joints on high energy circuits like this and melt your solder apart or start a fire. Of further note you might also heavily waterproof the battery leads and any other open connection to prevent potential electrocution in the rain or during even standard driving sometimes, we almost always add a plastic shell to applications like this as an errant car or bike may splash you with lethal results at any time though spray rubber or even electrical tape would be enough for most short term wetting though I'dreccomend a coating of resin over it if you tape it.
The potential solder joint heat issue can be checked with a thermal camera to see if your draw has issues under heavy load(check while riding or on test stand with the maximum liad on the bike) just look for a hot spot right where the join is.
This time you've failed,the crown welded directly on the pedals is a wrong idea,in my opinion.
0000000000000000000000000000000000
Exactly
It have to crown on to the free wheel backside
I've tried 3 or 4 different controllers and throttles and none of them work as a gradual increase in power is Just an on off switch. Which should be connected to the brake so that it turns off the motor when you apply the brake
Jarang ada orang yg berbagi ilmu seperti beliau. Dari idenya beliau bisa jadi suatu pemasukan atau pekerjaan yg menjanjikan.. terus berkarya bro,..
Great Yar. Where from u.u show great humanity.poor people cant suffer more.
That man has everything he needed... it will be heaven for me to hav a store room like him...🤗
Nice video. Replace Your small pedal gear with a freewheel gear(like rear gear) will help You when You will use/operate mode : pedal only, motor only, or both. It will make Your leg safer & more comfortable
This guy can really build everything....
Good bike!
Bhai so thank u for upload this video.so thank u
Oh my goodness... Electronic bike ... Nice idea sir.
Muskan Kaur Dhaliwal freshy
bad idea motor galat jaga pe lagaya hai
Ravinder
Mimonojdi
What a creative man. good work keep it up and thanks for the idea anyways 😁👍
You need a freewheel on that pedal crank. I like the skills, it looks like you have done this a couple of times, congrats!
Biafr
What does free wheeling mean? Does that mean pedals may stop while the motor still continues to power the wheels? How can he add that?
@@62_priyanshsingh6 he arranged that fix wheel with the help of cuts and threads.. instead of that he can use free wheel.
Free wheel helps to,
use the motor power to wheels without using of padels...
@@anmoldatar5787 Thanks ☺️
It's a funny way how you ride the bike but I like it and I like your idea about making an electric bike.
Keep up I'll watch all your videos from here on and good luck my friend.
this is very useful video. I like it and will make.
not useful at all. look the driving position...
manav. i😇😗
pls bro like me
😱 !! O ya cool
2 battery. To which kilomitor run the cycle
This is absolutely a creative channel
nicely don ... please provide link for sprocket and gairs you used..
Despite some faulties as the comments show (it cant be denied), thanks for the video. I got some interesting ideas to apply for my build.
F
I think it would be best to install a long chain to a certain small sprocket in the back so the peddle doesn't get you hurt.
those motors have resistance to peddling.
Great simple build but it needs a clutch or ratcheting sprocket between motor and the pedals.
Hi. noob question sorry. What is the function of clutch or ractcheting sprocket if added in this setup?
Tes pas bien moi même je n ai jamais pensé sa
รแตดคิตเ บอกให้หลับดีๆหน่อยดิว่าพี่จะทำสกูตเตอร์ทำจักรยานไฟฟ้าได้ไง
1 1h uf eudhc d dbbd d
Kekdkdiwkwktmlxms
I suggest putting the power sprocket on the other side (pedal plate side) and use a more longer chain driver so as to utilize the free wheeling of the plate.
Creative channel congratulations to 1million subscribers I am one of them
A small mistake, fixed the star that moves the wheel next to the cranks of the pedals, the star is ensolidated on the other side of the multiple stars that has the rear wheel, thus would have prevented the pedals from moving.
Нн
Щщ
Щш
Everyone else : buys expensive kits.
This guy: has everything😎😎
BETTER than walking 😁✌️
ব্যাপারটাতো খুব মজার! ভালো লাগলো 👍👍👍 hahaha
Wow amazing your idea
What connectors did you use at 8:13?
You should create your own cyborg robot.
هههههه
Planning on buying one of these bikes myself, really like the curves of the frame. They are called a pedalease big cat and used to be jhi mustang in the UK though, think multiple companies are selling the same bike just painted different colours. Cool build really like the battery pack.
But the video was awsome 👏👏👏👏👏👏👏👏👏👏👌👌👌👌👌👌👌👌👍👍👍
Brother i am from india
You always helpful for me🤗
Thanks
Its a great video for cycle lovers they will know how to make a simple cycle a electric bike good. Well done.
Mind blowing
Parabéns, ficou muito boa, que motor é esse que você usou?
From where u got the electric handle with keyhole I also want
I would love to see a 6-month review on that because that's a very simple DIY mid-drive and you just can't beat the mid-drives so if it stands the test of time actress good and broken in and still running effectively I might try something like that myself thanks for the idea
Привет! Молодец.9/10
Only one question, how to protect the motor from rain, is motor water proof ?
Like a lot.....have some Questions
How much time does it take to full charge and how much km it give in full
Hello, please tell me about an electric
bike with a gear motor 350w 24v. I
read that from 36v it goes faster and more powerful.Nothing
wrong with the motor or controller will not be if I
connect 36v. What power is better to choose a
controller? If it is not difficult, please write.
Thanks for share with me and I love this video
Bravo, tu est un génie mec. Merci pour toutes tes astuces :)
Bro what is the name of that which u adopted by removing the charger pin
I need one. How can I take it?
I love the fingernail of your little finger XD, Good job i love it
Muito top parabéns
Im also building an diy electric bike. Im ziptying the wires to the bike frame, but should i use electric tape to cover up the exposing wires?
Question guys, does the motor work without the gearbox, I mean without the axle that comes after the main gear of the motor?
instead of using this conroller, can one use PWM circuit to control motor speed??
and you have already designed PWM circuit, so can i use same circuit to control this motor???
How to find that equipments
Is there any way to put a free wheel on the pedal instead of the one he used ?
What distance can you travel with two 12v batteries? Thank you
who will control the pedals ?
Bro which drone you have?
How does it shift under load with somebody on it?
That's the thing that makes mid drives great you can use the existing gears and it's not a pain in the ass to change a tire
Классно! Мастер на все руки)
Cool bro you are great engineer 👍👌👏👏👏👏👏👍👍👍👍👍👌👌👌👌👌🤝🤝🤝🤝
Hİ GOOD project what is engine mark how can ı get
Helal sana bu projeyi bende yapacaktım tebrikler
Pĺ0
What connectors did you used for charger and battery?
So good! Nice job!
Jost pls link for the buttary
יאיר בקר ဲ႕
@@shweshwe3189 gj
Bravo you are an artist in this good work on the installation of motorcycle in our cars in our channels the same motor in the loop back and front, as well as a fan in the bicycle repair channel and tell you Bravo you and you a good greeting
This typd motor can install on bike type Germany Alaminum ?
What kind of tep you used to joint the battary
Hi.
Can this motor run at say 5 rpm. With a 24v pwm controler ?
What is the lovest speed on this motor.
Thanks
09987
Good job
Can you use the same set up but with hub motor
ehi brò can i ask you one things? for charge battery 24v this board central is good for stop it when is full charged or continue to charge and explode the battery?
Хорошо. Но требует доработки. Шатуны с педалями не должны крутиться при работе мотора
88b(
Keep cooked big difference
The famous Legbreaker!
Very good I'm turkey
Which make and model of bicycle is the one you are using?
非常的棒看你的视频 赞
sir what battery did you use
Please say the sproket chain wheel and website where to buy
Very cool bike dude i might go to my local walmart and get bike but i want mine to be in black and either install 2 stroke engine or maybe make it electric
The best video in my life
You should create safe guard for chain in case of injury
Cdijoy
What to do if the battery charge is over.can we charge it.
Bro. Which speed you got on throttle. Mod and what is load carrying capacity of this kit.
Can make 775 rpm motor bike show this on next video please
semakin creativ aja om kuh,.,.
terimakasih video info dan tutoriALNYA
Whdhdgd🔰❇Ⓜ🌀✅🎾🏸🏒🏹
And as ACES to charge the batteries?
Bro can you help. I have did one electric cycle same like this. But I have used 18650 li-ion batterypack done by me. That is 29.2v and 22A capacity and i have used 7s 24v 35A BMS. Motor and controller same as you used. The problem is when I'm throttling voltage is dropping that i can see in indicator. If the voltage drops at red color point , the battery getting Tripp off. Then i have to disconnect the battery and connect again. Can you give solution to avoid this issue
...just happen to have all that stuff. ...Let me get on this Right Now!!
Hi, what size were the 2 sprockets and chain you used for this build?
can we use li-ion batteries instead of leadasid
Please give a link description
make an overtaking clutch with the help of rear wheel stars and set forward on the pedals so that the feet can not be raised from the pedals
TexnikKOB ciao
Brother
Vc é genial!!!
Congratulations
👏👏👏👏👏
Sou um inscrito aqui do Brasil.
🇧🇷🇧🇷🇧🇷🇧🇷
De que país vc é?!
ط
عاشت أيدك حبيبي
i followed your constructions soo... i have the same as yours. appreciated.
what are the names of the wires that connect the batteries together
John and Jack.
Hi I followed your method and made electric cycle but speedof my cycle is 7 km/hr and once charged give only travel 6 to 8 km.
Pls help
just use more power
ALA cousin i have your same problem
Guys you need to use lithium battery cells
You need better batteries, use 18650 cells, try to make at least a 20amp battery pack and hey you better off walking if it only goes 7km an hour
sir can you tell me what materials will be needed
Sir what is the total weight of your bike after installation of the kit? Plz reply, i am planning to bye one.
Pode me dizer quanto quilometro fez com uma garga autonomia da baterias e de quantos amperes você usou
99or or i888888
You need to get the pedals to work independently from the motor.
N
Absolutely! Those flailing pedals are a potential disaster waiting to happen. This is an extremely irresponsible build.
@@yeer31 not irresponsible but I see you're point, it would be much better
👍👍
@@yeer31 i imagine he would peddle with the bike, it's the chain thats now a hazard.
Can you give link of these
Does the 350 Watts handles the uphill?