OneFinity CNC WasteBoard Creation and Surfacing | Beats Flow | Part 3 of 3
Vložit
- čas přidán 19. 03. 2021
- In this video, I design the wasteboard for the Onefinity CNC in Fusion 360.
The wasteboard design is super simple. I used 1/4 threaded T-nut inserts on the bottom side of the board so it's easy to clamp things down. After finishing the design I then used the Onefinity CNC to cut out the holes for the T-nut. The board is then flipped over, secured to the table, and level cut with a 1-inch surfacing bit. This project should have been much easier but I managed to make numerous mistakes. Eventually, the wasteboard got completed and I am really to move on.
If you are looking for step-by-step instruction for setting up your Onefinity CNC. Here is a link to the factory setup guide. • Official Onefinity CNC...
If you're interested in any of the aquarium-related models please leave a comment and check out www.thingiverse.com/thing:470....
If you would like me to create something specifically for your nano reef aquarium, please join the conversation here...
www.reef2reef.com/threads/wha..., or leave a comment about what you would like me to make next.
Thanks, Mark
Dialed in! 💪🏼
You want something for your wall?
Great vid. Lessons learned
Yeah, I learned my lesson this one but I am sure I'll mess up again soon lol.
Hey nice video, just a fun quick tip with fusion 360. When you do a bore or drill operation select the same diameter. After you select one hole it will select all the rest. just saves time. I learned this when I had to drill over 360 holes in a cribbage board.
Haha that would suck to select 360 holes. Thank you for the tip. I knew it existed but I haven't used it so I just keep going back to selecting each hole. I'll be sure to select same diameter next time. I am very new to the manufacturing workspace in Fusion 360.
Funny to run into your video, I just got out of Saltwater/Reef Hobby after nearly 25 years into it. I sold My tank, Eco Tech powerheads, Giesmann Lighting, Massive Apex Setup and Nyos/Trigger Systems equipment. Saved up all the Cash and used that to purchase my Onefinity Journeyman as I have taken up wood working as a new hobby over the last couple years :) Glad to see your still at the hobby, be interesting to see what you have planned in respects to the Reef hobby, I'm guessing Stands? or Acrylic Frag Rack type stuff?
Sounds like you purchase the Onefinity CNC to start making some reef tank and get back into the hobby lol.
I have a CNC, Laser, and a ton of printers and 98% of the stuff I make with them is reef related.
How are you liking the machine so far? Im hoping to get mine next month
I love it but I've only had time to make 2 projects so far. I am going to be making a video on these project so you should be seeing them in the next few weeks.
I suggest you get everything ready prior to getting your machine because it can take a good amount of time to set up your work area.
How did you shorten the path? i'm running into this same issue with the tool starting to far out. Beyond the limits.
Hi Mark, I was only over by like 2mm and I fixed the issue by moving my X zero point 2mm to the right of the edge of the board.
I run my surfacing at 240 ipm at .02" deep
If I have just gone that deep on the first cut I would have been done hours earlier lol.
Looking for more CNC vids.
More are coming soon.
hey, is there a link to the file?
I can't share the file because It likely won't work for other people. You would have to have the same size wasteboard and router bits. You would also have to secure the board to the same location. If you just got this machine and you need to create a wasteboard I suggested doing it yourself. It will help you to get familiar with the machine and the software you are going to use to generate tool paths.
That was so far beyond from simple. Apparently I was supposed to have an engineering degree before I got my onefinity.
Yeah it does have a learning curve. I started from scratch a few years ago but you have to be determined to figure it out. if you get frustrated just take a break but never quit.
I highly suggest you learn Fusion 360. This is what I use to create the things I want to cut and generate the tool paths. After just a few of the basic tutorials you will start to get the hang of things. Try to put in just a few hours a week and you will be making whatever you want in just a few weeks
Please, remember to flip the board so fast that you can´t see it..... beginner´s error. Madre mía!!!
Enjoyed the video. Can’t stand the music lol.
Thank you, can’t win them all lol.
I enjoyed the music. Just saying.