The Most Difficult Engine Pull...Totaled 700HP Dodge HellCat
Vložit
- čas přidán 6. 05. 2023
- The Totaled 700HP Dodge HellCat is stripped down.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Repair - Auta a dopravní prostředky
Did Robby call Demri “the old ball and chain”?? 😮
😂
Great vid. Hillbilly is great in front of the camera and the Boss is watching so much of the work, she is finding things.
Jefe’s impersonation of Robby is too funny. Remember; imitation is the sincerest form of flattery.
🤩 Fun to watch 2-4 episodes! Robby on the truck, Hillbilly on the Hellcat ❣️✨ Demri is a great boss!
Ive spent roughly 20 years between backyard autobody shops to full fledged collision shops and another shoo specifically working on big rigs..i only mention this because ive learnt so many techniques and tricks and i see alot of what ive learned for guys with 30-40 years experience in alot of what you do. The last shop i worked at was a 3rd gen shop and my bosses father who at the time was in his 70s tauhht me to do the taping technique to as Robby says saves time...really enjoy watching you guys i miss being in a shop due to some stupid antics im no longer able to work in a shop physically..you have a great connection with your crew and family. I do miss Dinner i hope he is well and wish nothing but good things for him in life..also its funny every shop ive worked at there was always a hillbilly..
Anyways great work on the vehicles you describe so much yet make ir interesting enough to not lose the attenrion of yhe viewers and great work on making great content..
Julian
PEI Canada
That is what "WHISKERS" needs in it, a HELL CAT drivetrain!!
Nice to see a cameo from Cody, I was beginning to wonder about him, and it’s always nice to see/hear from the boss. Thanks as always for sharing
Enjoyed the auto body work. Original reason I started watching you. Love hearing what your doing, using and why.
Hillbilly really likes to look into the camera and explain what's going on now. Good for hillbilly
Robby is right about photos. Digital photography made getting paid for body repair so much easier. I do not miss the Polaroid days…
I to remember the Polaroid days
Man you guys all work hard. Say hello to Big Dinner if you guys see him. Hope he is doing well !
thanks for another great video and having your wife working beside both you and hillbilly is a plus in your business...and hillbilly being so knowledgeable in tearing down,,you both make a great team along with your other workers...keep making great videos and helping people's vehicles when they are damaged in accidents.....keep up the great work and also staying involved with your family's life too.....
Love how you and your crew pay attention to details. This is the craftsmanship that raises your quality of work above others. Thanks for sharing.
I'm glad Demri asked about the difference between bondo and glaze because I always wondered that myself and now Robbie needs to teach us the differences between fillers and all the different things you can use to prep a car for body work, fabrication work and paint because I've been around cars all my life and I can build and rebuild engines and change out most of the parts of a car but the two things I've always stayed away from is electrical work and painting I don't like shocking myself and my paint work has so many runs in it that it looks like white water rapids when I'm done
Good morning in my opinion I think having the lovely boss more involved in projects would be a great idea. She is very knowledgeable and pays attention to details which is a major factor when dealing with repairs because you don't want to miss anything.
You guys are the best because you go the extra mile and always pay attention to the details.
Yes! Two videos in a row with bodywork from a professional at doing paint and body; life is good. I've been a long-time subscriber and loved the Banana and Nugget series; I learned a lot.
Horsepower is how fast you hit the pole. Torque is how far you move the pole! Appreciate you guys.
Yessir
All guys from Warsaw, watch out!
I actually liked the look on Robby's face - and his attitude coming through - when he said "Boss found this" or that... kind of like dangit!
Robby you are the man. Puddin would be so proud. My friend Brent at Halfass Kustoms just lost his shop and everything he had. He lost his current build and my favorite 1937 ratrod truck. Can you give him a shout out he's pretty bummed out and could use some cheering up. Thanks Robby for making America great again...
Oh those were the day's, chasing rocker panel dents. Well done. Fairly good explanation of energy absorption.
Baywatch? I was thinking cool hand luke.
As long as we don't get Hillbilly Bikini Carwash i'm ok with it.
I'm so glad you're back doing collision repair. I'm fascinated with both of your builds and collision repairs. I have a friend who does the same thing, but I only see the beginning and the end, nothing in the middle
LOVE the HATER'S sticker on the back window of a wrecked supercar hahahaha🤣
Thanks for doing a bodywork video. That's what keeps me coming back to your channel.
I loved the Baywatch action.🤣
That’s hot ! Peris Hilton! Lol
I love that Hillbilly knows Marcel Marceau but has no idea what Baywatch is. 😀
@Robby Layton, I enjoy watching the collision stuff. It is very informative. I enjoy watching your channel in general with its various content. Looking forward to watching of your videos. -Rob in Tennessee
Did I not see an episode and missed where Dinner went. I haven't seen him for a number of episodes. Hope he is well either way. Thnx for the great episodes
from the whole Robby Layton team
He moved to be closer to his fiancé 😊
Fantastic! Video Robby! This is the most entertaining video, out of all of the ones I follow. FAB RATS / CHAD’S FAB / MATTS OFF-ROAD & RECOVERY / TRAILMATER /
MERLINS OLD SCHOOL GARAGE / CASEY LADELLE CASCADE HEAVY RESCUE / Mischief Maker and some of your other friends! And I catch each video all of you put out every single day.
That montage of Robby has to be saved and used against him at every opportunity! Demri you have to help. I saw Jeffe and almost peed a little bit. You guys are so much fun. Hillbilly worrying about the stuck door brings back too many bad memories of “body shop woes”. I grew up doing that stuff. If you hook up batteries and replace airbags without replacing the sensors you blow the bag again. The fasteners suck that they use to hold stuff together. I love watching you goofballs
Thanks for taking us along
Excellent video guys.....great cam shot by Da Boss !!
You certainly stay busy!! Always interesting to see what you're up to!! That HellCat is pretty messed up but I know you'll make all better when you're done!! It will be interesting to see what all you have to do to make it whole again!!
Interesting process ! Thanks for sharing .
It's coming along nicely guys. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep making. God bless.
Crunchy -snapping plastic bits.. yikes! It says a lot about Robby’s experience level during the disassembly phase. Nicely done guys.
20 year old car... Sure... The yellow one.. not so much..
Come on, that impersonation was spot on😂
You boys kick A__! Great work. Nice to see more of the body shop stuff again.
Lovin these collision work videos 💯💯
Kia ora, "Well hello there" 🤣 👊 Hillbilly , getting better all the time. Great work the whole team. Enjoying your content over here in Aotearoa
Robby, Once again thanks for sharing more tips on sanding. I always did know about the cross sanding as that was taught to Me Years back when I worked in a body shop. Demri is a great boss! The way she puts tings for Hillbilly was so that would make Him think & then do. Also see Hillbilly sure has the patience needed in today's Vehicles. Glad I no longer work on them.
Great video! It’s fun to learn so much about the hella wrecked Hellcat!
And, what a bonus! Who knew Robbie could do a Bay Watch car wash‼️🤣🤣🤣
All I can think of while hillbilly is washing the car is the clip from Dodgeball The Movie at the carwash scene with the guy standing there picking his belly button saying "get in there real nice and Deep like Boy"😂😂
Thanks for sharing 👍😀
Robbie and hillbilly are on my bucket list to meet before I die. They are the most down to earth guys. I’ll pay a lot of attention to what other CZcamsrs say, and they say he is the same in the morning as he is at night. I wish there were more of y’all like that in this world. You can tell they both have a heart beside of Texas. Which is where I’m at by the way.
Robby, as always you continue providing us viewers with very entertaining content. I couldn't help but notice that Cody has been missing from your videos lately. Is he still working for you?
Great work all round, and Demri's the glue that holds it all together!
Anyone else missing Dinner, especially his laughing at Adley's jokes??? I know Dinner left for the right reasons but here's what I'm thinking.
What is the chance of having a FaceTime with Dinner and Adley segment once a week where she FaceTime's him and tells him a couple of jokes??? I think that it would be cool to have that. Please make it happen Robby and Boss Lady!!!!
I was also wondering, why I do not saw Dinner in the last videos.
When/why did he left?
@@Breenild -- He got engaged and moved to be closer to the lady in question. I think she was several hours away.
@@foxp2483 thanks, that's a good reason, but sad for us! 😢
@1:26... Love Robby's HIP ACTION, when he was washing the Hellcat! LOL!!! 😁😁 @2:48... I just watched Matt's video; I love Jefe-Robby! It's nice you have that battery lift; but I'd never want to actually work on an EV!
Your bodywork is purely professional! It doesn't get any better than that! Til next time take care and we'll see you on the next...😮😊
Love bodywork for the result. And you guys do a great job.
I'm surprised it took them so long to get you back for Dollar Store Matt, LMAO Ty for taking us along
I would love to get back into collision work. But the one thing stopping me is we don't have good shops around me like your shop.
Demri would look much better doing the baywatch wash
I’m not crazy about this Baywash thing . Awesome 😂
Love the Baywatch clip! Odd the Hellcat is in Matt's Recovery Yellow...
That was hilarious! I mean Robby, you did impersonate Matt. I laughed out loud when you showed Jeffe, impersonating you. I so love your videos. Keep them coming please!!!
Great video and great job with the body work and have a safe day
Great attention to detail from your QC department.
I used to work on industrial forklifts and some of the batteries for the electric ones were around 4000#.
Nice episode.
Hillbilly looks good turning wrenches on the Hell Cat. And, of course nobody pays attention to the details like Robby. Further, Demri is a little package of sunshine. Love your team edutainment.
Hillbilly, MoonPies are made in Chattanooga, TN, My home town! I am glad to hear you all have them out west!
Would love to see more body work. 👍🏼
I love your Videos. I even have a Dinner time shirt. I watch as soon as I see them come out. I do still miss Dinner
Busy, busy,busy Hillbilly and Robby can hardly wait to see the finished vehicles!
That Hellcat belongs to my brother in law. He enjoyed watching this! Lol
Great job guys 💪
Love the content brother
I saw that episode and thought it was really funny. Nobody can do Robbie, not even Robbie hardly.
Workin at the Car Wash yeah !! Lol. Y'all are a good match for working together ! Thanks for sharing ✌️❤️🙏
Nicely done y'all !😊🌞 ☕🐢
LOVE THE ENDING!!❤
exactly what Jay Bird said, good work
You seem to be very conscientious about your work, nice to see 😀🇺🇸
Gorgeous as always
Loving the open mouth thumbnails guys !!!
WHERE IS DINNER? Dinner got engaged and his fiancé is from up in Salt Lake City so he moved up there. He left with a standing job anytime he wants to come back, if he ever moves back. He definitely left on good terms. The other guys are all still here but probably off video taking care of collision repairs that they were actually trained and hired for. On occasion they pop into a video. Ultimately the shop is a collision and repair body shop with lots of work.
Dollar Story Robbie was amazing. LOL
Don't mes with the best in the best body man Robbie layton
I think the “Boss” said enough of those non-profit projects…she had the guys divide and conquer some PAYING projects!!! Someone has to watch the bottom line!! She probably has Cody working on other projects too!😂😂
Skill talent and patients
from a hell cat to a pole cat !
That’s my homies Charger hellcat 🔥🔥🔥🔥
Like seeing the Boss flex....
More Cody!!!
Was this after Hill Billy’s new teeth? He’s talking more confidently on camera!
At 15:04 I can't believe how tiny that rear differential is! Holy Cow!!
The mountains around your shop are so cool. Here in North Dakota, it's flat as can be. 😐
Good job Robby and Hillbilly and the Boss
Keep at it
One thing for sure: Jefe has got Robby’s swagger and gait down Pat.
I'm still in awe of the editing!
Robbie I love your channel and I think that you do great work! I have been in the industry for 14 years myself. I prefer to use Limco Lp20 epoxy primer on bare metal. Why do you like etch? I have personally never had good luck with etch.
Get all those front end parts on order for that hellcat now! I rebuilt a challenger a couple years ago and took months to get all those front end coolers!
You did great painting Jefes bronco 😂
FYI. There are triangles stamped on panles inboard of the rocker where the lift points are so the sill cladding doesnt need to be removed. They are designed and test to lift the whole vehicle. I believe its an industry standard maybe even regulatory.
Kinda shocked not to see Whiskers hanging out around the shop stalking that Hell Kitty
We used the ev battery lift table for drive train removals and all sorts of things at my chevy dealership, best tool ever lol.
Always cool to see how you guys do the body work. thanks for making great videos !
Awesome video
Robby you guys sure are walking the dog. Nice!
Have a good week and God bless amen.
Love your channel. Robbie, your shirts have been shrunk.