Signs of LCD TV screen defect Horizontal line, double image and screen breakage

Sdílet
Vložit
  • čas přidán 13. 04. 2022
  • Through this short video, presentation of 3 examples of screen failure in 3 different LCD TVs. The 3 failures presented are a screen breakage, appearance of a double image on the display and the presence of horizontal lines.
  • Věda a technologie

Komentáře • 42

  • @FreeCircuitLab
    @FreeCircuitLab Před rokem +15

    Don't stop this series, These are valuable videos... Love this channel

  • @tigris2735
    @tigris2735 Před 2 lety +1

    Thumbs up ! Thanks sharing all these tips. Love the budgies by the way, so cute 🥰.

  • @JunPTechnician
    @JunPTechnician Před rokem +2

    Thank you for sharing your knowledge sir watching here sending full support

  • @itechfone135
    @itechfone135 Před rokem +1

    Bravo belle vidéo! Super la music👍

  • @danilomanningjaya3831
    @danilomanningjaya3831 Před 2 lety +1

    SIR, THANKS A LOT VERY INFORMATIVE ALL YOUR VIDEO

  • @burhanuddin127
    @burhanuddin127 Před rokem +1

    Hi please start a series on oled tv, they are the obvious future....
    Thanks for everything you're doing....

  • @mjarefi
    @mjarefi Před rokem +1

    Don't stop videos and education sharing please 🙏🏻🙏🏻🙏🏻🙏🏻

  • @LeonardPutra
    @LeonardPutra Před 2 lety +4

    Superb channel!
    I don't get why the double image problem can be repaired by just cutting or taping the CKV & CKVB line (usually there are a pair of them, I've done that too myself).
    Still don't get it why do manufacturers give a pair of them, where it can obviously work with just 1 line. I hope this channel can explain my curiosity.

    • @elearningélectronique
      @elearningélectronique  Před 2 lety +1

      czcams.com/video/qQtgSMP5-3E/video.html

    • @LeonardPutra
      @LeonardPutra Před rokem

      @@elearningélectronique aaahhh, I see it clearly now! It is because the larger display uses dual side driving, right?

    • @mohbit3336
      @mohbit3336 Před rokem +1

      When you cut one you will lose resolution

  • @edvandodacosta1099
    @edvandodacosta1099 Před 2 lety +2

    Muito bom Brasil.. 🔝🔝

  • @marvintampoc3296
    @marvintampoc3296 Před 2 lety +1

    Thank you very much. New subscriber here

  • @AnsariElectronics430
    @AnsariElectronics430 Před měsícem

    Hello, hope you are fine. Can you plz make a video about xao vltage and what the difference between xao and 3.3 volt as both have same voltage

  • @AnsariElectronics430
    @AnsariElectronics430 Před 10 měsíci

    Long time go to see your new video. Can you make a video about the design and structure of both source and gate cof like if we dont know gate test point how can we find then. There is a scheme of every cof like rx signals always come in the center then voltge beside then then gama volt etc can you elaborate these things? Best wishes thanks

  • @abdbel3446
    @abdbel3446 Před rokem

    Bonjour, j'ai une LG OLED55B7V avec un trait vertical en couleur vert très fin et l'alimentation se met en sécurité en stand-by. J'aimerais savoir si le panel est hors de cause et c'est où que je dois chercher moi même étant passionné de réparation ? Merci

  • @newstech.292
    @newstech.292 Před rokem +1

    Please explain HAVDD what is work Please

  • @kovaifix7266
    @kovaifix7266 Před rokem +1

    Sir put daily videos. or weekly twice

  • @monaliza544
    @monaliza544 Před 2 lety +1

    I need your help

  • @aceselectronicsrepair1700

    Hi' Sir just asking there's anyway to repair double image nit using tape method directly to panel repair even don't have lcd panel repair laser
    best regards to you I'm also a tech. from Philippines

    • @elearningélectronique
      @elearningélectronique  Před rokem +1

      to my knowledge the use of the method with the tape is done only if the LCD is connected to a separate TCON board

    • @aceselectronicsrepair1700
      @aceselectronicsrepair1700 Před rokem +1

      @@elearningélectronique
      yes common temporary repair using tape method because the shortage TFT signal is blocking and only one side ang working hope soon both of us we have lcd panel repair for much better repair for panel congrats to all your video sir God-bless

  • @coastaltube4750
    @coastaltube4750 Před rokem

    Sir CKV CLK shorting explain

  • @AnsariElectronics430
    @AnsariElectronics430 Před 2 lety

    Nice video but i want to add one thing, horizontal line can be reparable by replacing cof.

    • @elearningélectronique
      @elearningélectronique  Před 2 lety

      Yes, when the gate driver is visible the replacement can be done with a special machine. After that it depends on the cost of the repair.

  • @menlink
    @menlink Před 2 lety

    bonjour, merci pour votre travail, j'ai une TV sharp lc-55 ucf8372es avec 2 lignes horizontales de 1 mm à penne visible, les gats driver ne sont pas visibles et j'ai déjà changé la carte-mère . je voudrais savoir si cette réparation est humainement possible .
    encore merci pour vos vidéos

    • @elearningélectronique
      @elearningélectronique  Před 2 lety +1

      Bonjour, la panne est liée au Gate driver. Malheureusement si ce dernier est construit à l'intérieur de l'écran, il n'y a pas de réparation possible hormis le changement d'écran.

    • @menlink
      @menlink Před 2 lety

      C'est bien ce que je pensais merci beaucoup

  • @MergeTheNews
    @MergeTheNews Před rokem

    What is the solution? Any defect of the components that can be replaced instead of the screen panel?

    • @elearningélectronique
      @elearningélectronique  Před rokem

      in the first and third case there is no other alternative than to change the panel. On the other hand, in the second case, the defect is also due to the panel but there is a trick that allows you to correct the anomaly by cutting certain signals from the TCON card such as CKV, CKVB, etc...

  • @jackssesanga7601
    @jackssesanga7601 Před rokem

    Where have you lost Sir,?

  • @mzurc50yt
    @mzurc50yt Před rokem

    Is that repairable?

    • @elearningélectronique
      @elearningélectronique  Před rokem

      The 3 televisions in this video have a screen defect. By changing the screen the repair is possible but at what cost. In the case of the screen with a double image, we can correct the defect by removing some signals from the TCON board.

    • @mzurc50yt
      @mzurc50yt Před rokem +1

      @@elearningélectronique nice thank you for your info

  • @marcbaflast7271
    @marcbaflast7271 Před rokem

    Très désagréable quand cela arrive. Alors le remède c'est quoi?

    • @elearningélectronique
      @elearningélectronique  Před rokem

      Seulement dans le cas d'une double image, on peut bidouiller la carte TCON. Dans les autres cas, remplacement par un écran neuf ou achat d'un nouveau téléviseur.

  • @arabi0146
    @arabi0146 Před rokem

    السلام عليكم ورحمة الله وبركاته..أين النشاط

  • @wifaproduction
    @wifaproduction Před 2 lety +1

    hello first time here to say hello, if you want to come too, okay?

  • @motazosman4916
    @motazosman4916 Před 2 lety +1

    Translate to
    Arabic