038 Second life of luthier thumb plane
Vložit
- čas přidán 26. 09. 2020
- I bought that old luthier thumb plane in 2019. It's time to bring it back to life and send it to one person who doesn't expect it ;)
I fited an old laminated plane blade to the body, and i make the wedge. It was a lot of work because the pin was a little bit skewed..
As the material for wooden parts i used jasmine wood.
It cames from my friends garden, it was a big shrub with 50mm trunks.
The wood looks almost like boxwood but it is not so hard.
I can't find any info about it but the hardness seems to be similar to sweet cherry or better.
For the finish i used blo, few coats of shellac orange and one coat of tru oil.
Don't take it as a perfect restoration, i just want to allows it work again :)
I hope you will like it!
Thank you!
Big thanks for my patrons!
Andrew Dawson
Joshua Lucas
Ross Tomažin
Javier Quintana
Rene Polak
Luboš Šulc
For support my channel click here:
/ @stavrosgakos
or use my PayPal account: esortodox@gmail(dot)com
Thank you!
....................................................................................................
For more check my instagram profile:
/ stavros_gakos
Remember to subscribe my buddy, Łukasz Giergasz
PL
Kupiłem ten stary strug lutniczy w 2019 roku. Pora przywrócić go do życia i wysłać osobie, która się tego nie spodziewa;)
Dopasowałem do korpusu stary, laminowany nóż i wykonałem klin. Było sporo pracy, bo trzpień biegnący w poprzek korpusu był trochę przekrzywiony.
Jako materiał na elementy drewniane użyłem drewna jaśminowego.
To był duży krzew o pniach 50 mm średnicy.
Drewno wygląda prawie jak bukszpan, ale nie jest tak twarde.
Nie mogę znaleźć żadnych informacji na ten temat, ale twardość wydaje się być zbliżona do czereśni lub wyższa.
Do wykończenia użyłem pokostu lnianego, kilku warstw szelaku i jednej warstwy oleju tru oil..
Nie traktuj tego projektu jako idealnej renowacji, po prostu chcę, aby strug znowu zadziałał :)
Mam nadzieję, że Ci się spodoba!
Dziękuję!
Wielkie dzięki dla moich patronów!
Andrew Dawson
Joshua Lucas
Ross Tomažin
Javier Quintana
Rene Polak
Luboš Šulc
Aby wesprzeć mój kanał, kliknij tutaj:
/ @stavrosgakos
Dziękuję! - Věda a technologie
I bought that old luthier thumb plane in 2019. It's time to bring it back to life and send it to one person who doesn't expect it ;)
I fited an old laminated plane blade to the body, and i make the wedge. It was a lot of work because the pin was a little bit skewed..
As the material for wooden parts i used jasmine wood.
It cames from my friends garden, it was a big shrub with 50mm trunks.
The wood looks almost like boxwood but it is not so hard.
I can't find any info about it but the hardness seems to be similar to sweet cherry or better.
For the finish i used blo, few coats of shellac orange and one coat of tru oil.
Don't take it as a perfect restoration, i just want to allows it work again :)
I hope you will like it!
Thank you!
Fantastic as always! You should make a plow plane with a skate next!
So happy to be seeing more videos of yours!! Some of the best on CZcams!!!! Thank u
Thank you:)
Really glad that your back... your craftsmanship is truly legit!!!!
Thank you :)
Looked like a perfect restoration to me
Beautiful, thank you.
It’s such a great gift to see so many new videos by you!
That's my pleasure Jamis :)
"Don't take it as a perfect restoration..." Come on, how are we supposed to see it? It's just AWESOME!!!!
Thanks a lot!
Z biegiem lat człowiek mimowolnie zaczyna czerpać satysfakcję z przywracania do życia starych klamotów. Czasami bez żadnych racjonalnych przesłanek. Większość wypowiada wtedy formułę „to coś ma historię i duszę”. W tej imaginacji coś jednak musi być, bo w nowych, lśniących zabawkach nie można już odnaleźć dotychczasowego uroku. Jak zwykle znakomita robota. 👍🏼
Coś w tym jest ;)
Dziękuję!
Beautifully done. It is a pleasure to watch such a display of skill and craftsmanship and dedication. Thank you, Sir.
You're welcome Lynn :)
SG never disappoints!
Nice to see you saved that old v/m plane.
Awesome!
I'm sure whomever you give it to will cherish it and hopefully will keep it as a user tool.
Again amazing work Stavros
Absolutely love the Cupid’s bow on the wedge.
Beautiful detail
Thank you Scott!
Beautiful work again. I love the decoration and the bottom of the wedge, makes it look so classy.
Thank you!
А Пан Фокусник!Ловкость рук и никакого мошенства!))))
Nicely done. Thanks for showing us.
Thanks!
Great restoration of a deserving old thumb plane. Excellent work replacing missing blade and wedge. Sometimes you just need a thumb plane and nothing else will do.
Thank you Thomas!
Very impressive! Lovely tool it became, I like the cupids bow
and I'm sure the lucky one who is going to get it will be very happy ;)
Thank you :)
I really like your "high angle" chisel at 11:25. That's a slick modification; never seen that before.
Thanks Jake, try to watch it czcams.com/video/re_bp5Lp0To/video.html
Thanks
Otra obra de arte recuperada por el maestro Gakos, parece el zapato de un bebé, impresionante resultado final,un saludo cordial y por supuesto un gran like desde Narón, Galicia ( España)
Really great work. Inspiration for new projects
Thank you!
Juste parfait
Awesome work as always!
Master of Restoration! Merry Christmas for you
That's a great trick making your mark look old with bluing. Looks like it's always been there.
Thank you!
Brilliant as always Stavros .
Thanks Ray!
Stara, dobra szkoła Billa Cartera, aż miło popatrzeć.
Dzięki!
It's hard to get over how much a luthier's plane looks like a baby's shoe.
GrekoMacedończyku :) coraz większą przyjemność mi sprawia oglądanie twych zmagań z drewnem. Szacun 🤜🤛
Dzięki :)
Nice! I love the detail on the end of the wedge.
Thank you Jim!
Great, that little thing!
Thank you!
greetings my friend i'm happy to see your videos again
Thank you Alexandre! Regards!
Konkretnie polane do szklanic 👍
Zuch Chłopak! 😉
A tak na marginesie jak zwykle świetna robota💪👍
Dzięki !
I stopped at 1:07 to admire your plane cabinet. You’re going to need another cabinet! Great and inspiring work as always. I loved the curves at the end of the wedge! One suggestion, which I always make to other CZcamsrs, you need a mat or rug to stand on. Standing on concrete takes its toll on your back and joints.
Thank you! You have right, one day i'll build another, bigger cabinet. The floor is not finished, but it is nice tip. Thank you
Magnifico como siempre.
Que bonito essa pequena ferramenta de luthier
Parabéns.
Thank you!
Extraordinario trabajo Stavros, 👍😀👍
Thank you!
The sole of the planer must also be curved in both axes and mirror polished ...
Podeszwa strugarki również musi być zakrzywiona w obu osiach i wypolerowana na lustro...
I have planes that sit in my workshop for more than 3 years to be modified/repaired. So if your sit since 2019 is not too much time. :)
Beautiful little plane mate.I thought you were making one for the little one to come help Dad 😂😂
Thank you! She likes spokeshave only :)
Have you made her one yet😂😂come on dad
Magnifique réalisation. Ce petit rabot est reparti pour une nouvelle vie.
Thank you :)
I think you needed to soak it longer in the vinegar, there was still too much rust there. Probably over a day. Citric acid works faster and doesn’t smell as much.
Fun video.
Thanks! Yup, i didn't have a time so i soakd it about 6-7 hours. Regards!
I think he got the rust... But I would have shown the neutralizing step with baking soda or ammonia. Unless that’s a trade secret :)
Defo Polish stomach :D
bez komentarza,poziom master
Dzięki Grzegorz!
Спасибо , что делишься своим мастерством
Dziękuję!
Jesteś Mistrzem 😎
Dzięki!
@@StavrosGakos Posiadam weterana którego trzeba uratować.
@@sbilewski Witaj w klubie :)
Absolutely great work! My eyes are not so good. Was that a .10mm feeler gauge you used when checking the fit? If so, is that a good overall tolerance to use in most hand tool work? Thanks!
Thanks Ron! It was Simple feeler gauge, 0,10 mm tolerance is good enough 👍
Nie wiem. Kompletnie się na tym nie znam, to nie jest moja dziewczyna, nie wiem czy to jest dobrze czy źle. Ale oglądam te filmy jak zahipnotyzowany. Jest 12.30 w nocy a ja musiałem zrobić do końca. Mega filmik i mega wykonanie. Pozdro i powodzenia.
Huzzzaaah !
For a thumb plane that's really huge!
I was a little worried when you made the width of the blade a close fit in the plane, since you have no lateral adjustment possibility, but with a strong camber on the blade, lateral adjustment isn't needed anyway.
Yup, it doesn't matter :) Regards!
What a little ripper. Stunning work as always. I’m still going through your videos so lm not sure if you answered this question but how many planes do you own and how long have you been making them.oops one more question do you still have the first plane your made thanks. Love your channel I get so much out of it
Hey, i really don't know how many planes i got, maybe 40-50 i think. I throwed out my first ever plane :) It was laminated something ;D cheers!
A glass of vinegar a day, keeps the rust away. ;)
Bingo ;)
i knew he would drink it from the very moment i saw two glasses
Pięknie go zrobiłeś Mati! Klin wyszedł bardzo proporcjonalnie. O ile to możliwe to podciągnąłeś poprzeczkę jeszcze wyżej - i pod względem jakości samego materiału i treści...pozdro chopie! PS. Dieta spirytusowa?
Dzięki stary! Długo się do niego zabierałem :) dieta spirytusowa podobno dobra na stawy ;) pozdrowienia dla Ciebie i rodzinki!
You done a beautiful job saving the plane the wood almost looks like old ivory. I would like to know about wooden ruler at 9:15 ?
Thank you! Yo can see it cleary here czcams.com/video/EqVp1cTETMM/video.html at 0:44. I found it in my basement after i bought the house. Reegards!
Who did you send it to in the end? (PS, as a violin maker I was particularly interested in this video. My thumb planes are made of brass, always a pleasure to use them. In David Russell's book there are some wonderful ones pictured.)
To the luthier. Regards!
Napisałbym , nic wielkiego , ale to nie była by do końca prawda ( po za rozmiarami struga ) :D
Dzięki Obi ;)
10:03 - your knuckles ... have you been fighting again ?
I was only working in my garden ;)
!;-)
Polecam spirytus zamiast octu;))
Dzięki! Nie wiedziałem, że spirytus tak dobrze odrdzewia ;)
Do you vive me as gift please!?
It's impossible, regards
Please turn off mid roll or mid video advertising as it is very distracting from an otherwise great video.
Susan Wojcicki is not paying the content creators enough to put up with these tiresome commercials.
Boycott CZcams premium apps and boycott CZcams advertisers.
Susan Wojcicki is merely going for a cash grab at the expense of the creators and the viewers.
I got enough $ from yt to develop my workshop so all the adds will stay. Regards!